Primary and secondary organic aerosol in an urban/industrial site: Sources, health implications and the role of plastic enriched waste burning

PM10 samples were collected from an urban/industrial site nearby Athens, where uncontrolled burning activities occur. PAHs, monocarboxylic, dicarboxylic, hydroxycarboxylic and aromatic acids, tracers from BVOC oxidation, biomass burning tracers and bisphenol A were determined. PAH, monocarboxylic acids, biomass burning tracers and bisphenol A were increased during autumn/winter, while BSOA tracers, dicarboxylic- and hydroxycarboxylic acids during summer. Regarding aromatic acids, different sources and formation mechanisms were indicated as benzoic, phthalic and trimellitic acids were peaked during summer whereas p-toluic, isophthalic and terephthalic were more abundant during autumn/winter. The Benzo[a]pyrene-equivalent carcinogenic power, carcinogenic and mutagenic activities were calculated showing significant (p < 0.05) increases during the colder months. Palmitic, succinic and malic acids were the most abundant monocarboxylic, dicarboxylic and hydrocarboxylic acids during the entire sampling period. Isoprene oxidation was the most significant contributor to BSOA as the isoprene-SOA compounds were two times more abundant than the pinene-SOA (13.4 ± 12.3 and 6.1 ± 2.9 ng/m³, respectively). Ozone has significant impact on the formation of many studied compounds showing significant correlations with: isoprene-SOA (r = 0.77), hydrocarboxylic acids (r = 0.69), pinene-SOA (r = 0.63),dicarboxylic acids (r = 0.58), and the sum of phthalic, benzoic and trimellitic acids (r = 0.44). PCA demonstrated five factors that could explain sources including plastic enriched waste burning (30.8%), oxidation of unsaturated fatty acids (23.0%), vehicle missions and cooking (9.2%), biomass burning (7.7%) and oxidation of VOCs (5.8%). The results highlight the significant contribution of plastic waste uncontrolled burning to the overall air quality degradation.     

Carbonyl compounds in the urban environment of Athens,Greece

The concentration levels of 15 selected carbonyl compounds in 62 samples were determined at two sites in Athens basin from June to December 2000. Formaldehyde was the most abundant species (0.05-39 microg m(-3)), which comprised from 22% to 37% of the total measured compounds, followed by acetaldehyde (4.32-49 microg m(-3)), acetone/acrolein (0.64-198 microg m(-3)) and butanal (0.79-140 microg m(-3)). The mean formaldehyde/acetaldehyde and acetaldehyde/propanal molar ratios were calculated. No significant seasonal differences were observed for all the carbonyls. Photochemical production was found to weigh upon atmospheric levels for 83-93% in summer days, dropping below 33% in the winter. The importance of formaldehyde and acetaldehyde as a source of hydroxyl radicals in Athens was also assessed.     

Characterization of lead,cadmium, arsenic and nickel in PM(2.5) particles in the Athens atmosphere,Greece

Concentrations of Pb, Cd, As and Ni in PM(2.5) particles were measured in samples collected, using low volume PM(2.5) samplers (Harvard Impactor system, HI) at two sites in Athens basin; Patission Street in Athens city center and Rentis, a semi-urban and industrial area, during March 1995-March 1996. Sample analysis for Pb, Cd, Ni and As was accomplished by electrothermal atomic absorption spectrometry after total digestion. Annual geometric mean values in 183 PM(2.5) particles samples were found to be: Pb: 143 nanogram(-3); Cd: 0.34 nanogram(-3); Ni: 4.55 nanogram(-3); As: 0.79 nanogram(-3). The geographical and temporal distribution patterns were investigated. Pb exhibited higher values during the winter period. For the other elements no significant seasonal variation was observed. Wind direction, air temperature and relative humidity affected element concentrations. Principal component analysis was applied on the data to enable source apportionment of toxic elements in PM(2.5) particles. It was found that Pb, As and Ni have common sources, which could be vehicles emissions/oil combustion and resuspended road dust. Cd and a portion of As originate from industrial activities.     

Numerical simulation of landfill aeration using computational fluid dynamics

The present study is an application of Computational Fluid Dynamics (CFD) to the numerical simulation of landfill aeration systems. Specifically, the CFD algorithms provided by the commercial solver ANSYS Fluent 14.0, combined with an in-house source code developed to modify the main solver, were used. The unsaturated multiphase flow of air and liquid phases and the biochemical processes for aerobic biodegradation of the organic fraction of municipal solid waste were simulated taking into consideration their temporal and spatial evolution, as well as complex effects, such as oxygen mass transfer across phases, unsaturated flow effects (capillary suction and unsaturated hydraulic conductivity), temperature variations due to biochemical processes and environmental correction factors for the applied kinetics (Monod and 1st order kinetics). The developed model results were compared with literature experimental data. Also, pilot scale simulations and sensitivity analysis were implemented. Moreover, simulation results of a hypothetical single aeration well were shown, while its zone of influence was estimated using both the pressure and oxygen distribution. Finally, a case study was simulated for a hypothetical landfill aeration system. Both a static (steadily positive or negative relative pressure with time) and a hybrid (following a square wave pattern of positive and negative values of relative pressure with time) scenarios for the aeration wells were examined. The results showed that the present model is capable of simulating landfill aeration and the obtained results were in good agreement with corresponding previous experimental and numerical investigations.     

Influence of different organic amendments on the degradation, metabolism, and adsorption of terbuthylazine

The behavior of the herbicide terbuthylazine (TA) was studied in a clay loam soil after the addition of different organic amendments (OAs). Addition of poultry compost (PC) and urban sewage sludge (USS) retarded degradation of TA with half-life values of 60.3 and 73.7 d, respectively. In contrast, addition of corn straw (CS) did not significantly alter the degradation of TA (half-life 55.5 d) compared with its degradation in nonamended soils (half-life 57.3 d). Sterilization of amended and nonamended soils resulted in a partial inhibition of TA degradation, indicating that biotic and abiotic processes are involved in TA degradation in soil. Degradation of TA led to the formation of desethyl-terbuthylazine, which was detected in low amounts (<8% of the initially applied TA) in all soils. Adsorption of TA was relatively low, with Kd values ranging from 2.31 L kg(-1) in the nonamended soil to 3.93 L kg(-1) in the soil amended with USS. In general, Kd values increased with increasing soil organic carbon content. The dissolved organic matter extracted from the OAs did not appear to interact with the pesticide or the soil surfaces, suggesting that it would not probably facilitate herbicide transport. Desorption studies indicated a slight hysteresis of TA desorption in the amended soils compared with TA desorption in the nonamended soil, which was entirely reversible. These findings might have practical implications for the environmental fate of TA in agricultural soils, where the studied OAs are commonly used.     

Copper fractionation with dissolved organic matter in natural waters and wastewater--a mixed micelle mediated methodology (cloud point extraction) employing flame atomic absorption spectrometry

A cloud point extraction-preconcentration methodology for the speciation analysis of free and organically complexed metal species in natural waters is presented. The method is based on the neutralization of the electrostatic charge of the humate-metal complexes with a positively charged surfactant in a high ionic strength solution environment. The resulting complexes are conveniently solubilized in the micelles of a non-ionic surfactant medium and are thus separated from the bulk aqueous phase. Free metal species are also determined by complexation with a conventional chelating agent under mild conditions. The overall procedure is easy, rapid and allows for a high sample throughput in terms of massive analysis of many samples in the same time period. The method offers substantially low detection limits of 8.5 and 0.9 micrograms l-1 for bound and labile species respectively, with a calibration curve rectilinear in the wide range 40-150 micrograms l-1 for the humate associated and 4-40 micrograms l-1 for the free metal species. The method is free from interferences yielding recoveries in the range 97-102% for various samples of different matrixes.     

A comprehensive air quality investigation at an aquatic centre: Indoor/outdoor comparisons

Environmental Science and Pollution Research - Air quality and comfort parameters in a naturally ventilated aquatic centre were studied in relation to the outdoor pollution levels. Simultaneous...     

Composition and production rate of dental solid waste in Xanthi, Greece: variability among dentist groups

The objective of this work was to determine the composition and production rate of dental solid waste, produced by dental practices in the Prefecture of Xanthi, a multicultural area in Northeast Greece with a population of 102,000. For the study, 22 private dental practices and 1 public dental practice were selected of the 48 private and 5 public dental practices in operation. The 22 private dental practices included 16 owned by Christian Greek-born dentists, 3 by Moslem dentists and 3 by Christian dentists repatriated from the former Soviet Union. Differentiation on the basis of religion is directly related to the countries from which dentists received their training, e.g., Greece-European Union, Turkey and former Soviet Union. Thus, including the one public dental practice, 4 study groups were considered. Waste collection took place for 22 working days, from 20 May to 27 June 2002. This period was considered to be a representative one for a semi-rural area, such as Xanthi. Dentists were instructed to collect the total amount of waste they produced. A total of 260 kg dental solid waste was collected during the study period and was manually separated. Dental solid waste was classified in three main categories: (1) Infectious and potentially infectious waste, accounting for 94.7% by weight. (2) Non-infectious waste accounting for 2.0%. (3) Domestic-type waste, accounting for 3.3% by weight. The category of infectious waste is classified as hazardous and includes components containing metal (8.51%), components without metal (91.18%) and amalgam (0.33%). Using the weight data, the production rate of dental solid waste for the study period in the Prefecture of Xanthi was determined to be 513 g/practice/day and of infectious and potentially infectious waste 486 g/practice/day. The latter includes the production rate of sharps (9.8 g/practice/day), non-sharps (31.6), infectious waste without metal (443) and amalgam (1.6 g/practice/day). Since dental solid waste is currently disposed of in landfills together with the municipal solid waste, the results of the study were used to suggest an appropriate management scheme. The results were also used to compare the composition and production rates of dental solid waste produced by the 4 study groups.     

Volatile hydrocarbons in the atmosphere of Athens,Greece

This work presents the results of one-year monitoring study of Volatile Hydrocarbons, VHCs, in the atmosphere of Athens. It is the first systematic attempt to determine the VHC levels in the Athens' atmosphere with the very well known photochemical pollution problems. The purpose of this work was to create a database concerning VHCs in order to evaluate the photochemical pollution in this area (ozone creation, case studies and meteorology). Totally, 308 samples were collected at three different sites used in the state-monitoring programme involving the criteria pollutants. Air samples were collected on Tenax TA tubes and analysed by thermal desorption and dual column GC dual FID. Fifteen selected compounds were studied; 6 alkanes and 9 benzenoid compounds. The measured values of individual alkanes ranged from 0.39 pg m(-3) to 33 pg m(-3), and those of aromatics from 0.20 pg m(-3) to 616 pg m(-3). The sum of all 15 VHC concentrations ranged between 16 and 1697 pg m(-3). The time and spatial variations in the concentration of these compounds were assessed. Volatile hydrocarbons exhibited a clear seasonal and time cycle, showing higher concentrations during winter and early morning hours. Study of the spatial variations of VHC levels showed higher concentrations at the center of the city. The variation of toluene/benzene ratio and the correlation between VHCs, criteria pollutants (CO, NOx and O3) and meteorological parameters were also assessed. It was demonstrated that a trip-line of the VHCs concentration at the city center doubles the ozone concentration at peripheral areas under favourable meteorological conditions.