Conceptual design of a three fluidised beds combustion system capturing CO2 with CaO

In this work, the Aspen Hysys conceptual design of a new process for energy generation at large scale with implicit CO₂ capture is presented. This process makes use of the CaO capability for CO₂ capture at high temperature and the possibility of regenerating this sorbent working in interconnected fluidised bed reactors operating at different temperatures. The proposed process has the advantage of producing power with minimum CO₂ emissions and very low energy penalties compared with similar air-based combustion power plants. In this system, five main parts can be distinguished: the combustor where coal is burnt with air, the calciner where the fresh and the recycled CaCO₃ is calcined, the carbonator where the CO₂ produced in the combustor is captured, the supercritical steam cycle and the CO₂ compression system. In this arrangement, the three fluidised bed reactors are interconnected in such a way that it is possible to perform the CaCO₃ calcination at a temperature of 950 °C with the energy transported by a hot solid stream produced in the circulating fluidised bed combustor operating at 1030 °C. The stream rich in CaO produced in the calciner is split into three parts. One of them is transported to the carbonator operating at 650 °C where most of the CO₂ in the flue gas produced in the combustor is captured. The second one is sent to the combustor, where it is heated up and used as energy carrier. The third solid stream that leaves the calciner is a purge in order to maintain the capture system activity and to avoid inert material accumulation. Because of the high temperatures involved in all the system, it is possible to recover most of the energy in the fuel and to produce power in a supercritical steam cycle. A case study is presented and it is demonstrated that under these operating conditions, 90% CO₂ capture efficiency can be achieved with no energy penalty further than the one originated in the CO₂ compression system.     

A preliminary assessment of levels of antifouling booster biocides in harbours and marinas of the island of Gran Canaria, using SPE-HPLC

An analytical procedure was developed to allow for the study of the levels of concentration of biocides in the various different ports on the island of Gran Canaria, The Canary Islands. The analytes studied were extracted from water samples using solid-phase extraction and then determined by high-performance liquid chromatography using a diode array detector. The relative standard deviations of the developed procedure were under 12%. Recoveries over 85% and limits of detection between 0.007 and 0.4 μg/L were obtained for all the analytes. The method was applied to the analysis of sea water samples from the ports and marinas on the island of Gran Canaria.     

Trends in exhaust emissions from in-use Mexico City vehicles, 2000–2006. A remote sensing study

A remote sensing study was conducted in year 2006 in four locations of the Metropolitan Area of Mexico City (MAMC). Two of the sites were the same studied back by us in year 2000 and by others in year 1994. A database was compiled containing 11,289 valid measurements for the carbon monoxide (CO), total hydrocarbons (THC), and nitric oxide (NO) exhaust vehicles emissions. Valid measurements were binned for each pollutant by the vehicle specific power (between −5 and 20 kW tonne⁻¹) for the 2000 and 2006 databases. The mean average CO, THC, and NO emissions for year 2006 were determined to be 1.10 ± 0.18 vol.%, 299 ± 88.4 ppm, and 610 ± 115.0 ppm, respectively. Matching the vehicle driving patterns of the fleet measured in year 2000 with the emissions factors obtained in this work, allows estimating the trends in the exhaust emissions of vehicles in the MAMC. The adjusted results of the remote sensing study performed in year 2006 shows that the fleet has decrease 22% in CO and 17% in NO emissions, with small change in total hydrocarbons emissions. The improvements could be related with the introduction in year 2001 of vehicles that met tighter emissions standards, particularly for nitrogen oxides.     

Directional Connectivity of Wolf (Canis lupus) Populations in Northwest Spain and Anthropogenic Effects on Dispersal Patterns

In view of the extensive information available on wolf ecology and habitat suitability, and on the fragmentation of wolf populations by motorways and similar infrastructures, a key factor in their conservation, the aim of the present study was to model the directional connectivity of wolf populations in the region of Galicia in northwest Spain, and to quantify anthropogenic effects on wolf dispersal patterns. To this end, we map the probability of wolf movement by means of known relationships between wolf movement and anthropogenic, vegetation and topographic factors. The relative importance of each factor was quantified by sensitivity analyses. Three types of cost surface were constructed: (a) isotropic surfaces, (b) anisotropic cost surfaces taking into account terrain slope effects in the movement, and (c) surfaces obtained by combining the isotropic and anisotropic surfaces. The results obtained by approaches (a) and (c) indicate that one of the region’s motorways (the AP-9) probably acts as a significant barrier to wolf movement, possibly isolating two subpopulations, while the remaining motorways probably do not have major effects on dispersal. Estimation of lowest-cost routes for wolf displacement allowed identification of areas critical for connectivity, in which it would be of interest to perform detailed studies with more precise input data on motorway course and the location of drainage channels and underpasses, etc. (these being the factors identified by sensitivity analysis to be those with the most marked effects on the cost surfaces). The visualization of connectivity enabled by this approach will allow wolf management and conservation efforts to be focused on critical areas: such efforts might include measures aimed to encourage wolf dispersal through areas in which conflict with human activity is minimized, thus contributing positively to the management of a socially conflictive species. Finally, evaluation of the different cost surfaces suggests that it would be of interest to introduce two modifications to the anisotropic algorithm, to allow the user to weigh the importance of the different input factors, and to allow the inclusion of more than one anisotropic factor in the model.     

Incorporating temporally dynamic baselines in isotopic mixing models

Stable isotopes (particularly C and N) are widely used to make inferences regarding food web structure and the phenology of consumer diet shifts, applications that require accurate isotopic characterization of trophic resources to avoid biased inferences of feeding relationships. For example, most isotope mixing models require that endmembers be adequately represented by a single probability distribution; yet, there is mounting evidence that the isotopic composition of aquatic organisms often used as mixing model endmembers can change over periods of weeks to months. A review of the literature indicated that the delta13C values of five aquatic primary consumer taxa, commonly used as proxies of carbon production sources (i.e., trophic baselines), express seasonally dynamic cycles characterized by an oscillation between summer maxima and winter minima. Based on these results, we built a dynamic baseline mixing model that allows a growing consumer to track temporal gradients in the isotopic baselines of a food web. Simulations showed that the ability of a consumer to maintain or approach isotopic equilibrium with its diet over a realistic growth season was strongly affected by both the rate of change of the isotopic baseline and equilibration rate of the consumer. In an empirical application, mixing models of varying complexity were used to estimate the relative contribution of benthic vs. pelagic carbon sources to nine species of juvenile fish in a fluvial lake of the St. Lawrence River system (Québec, Canada). Estimates of p (proportion of carbon derived from benthic sources) derived from a static mixing model indicated broad interspecific variation in trophic niche, ranging from complete benthivory to > 95% reliance on pelagic food webs. Output from the more realistic dynamic baseline mixing model increased estimated benthivory by an average of 36% among species. Taken together, our results demonstrate that failing to identify dynamic baselines when present, and (or) matching consumers with baseline taxa that possess substantially different equilibration rates can seriously bias interpretation of stable isotope data. Additionally, by providing a formalized framework that allows both resources and consumers to shift their isotopic value through time, our model demonstrates a feasible approach for incorporating temporally dynamic isotope conditions in trophic studies of higher consumers.     

Adjustment of female reproductive investment according to male carotenoid-based ornamentation in a gallinaceous bird

Carotenoid-based ornaments (many yellow–orange–red colourations) may signal the genetic or parental quality of the bearer. Thus, their expression could influence the amount of resources/energy that the mate will invest in the production of offspring, thereby optimising its reproductive fitness. The differential allocation hypothesis (DAH) predicts that females mated with more attractive males should lay more and better eggs. This has been explored only in few bird species with carotenoid-based traits. We tested this hypothesis in the red-legged partridge (Alectoris rufa), a gallinacean with very variable laying capacity. Both sexes display carotenoid-based ornamentation that gradually fades throughout the laying period. Here, the redness of beak and eye rings of captive males was intensified after mating by means of paint. The proportion of females that laid eggs did not differ between treatments. Amongst laying females, those mated with colour-enhanced males (experimental females) tended to lay earlier and produced significantly more eggs than controls, but of similar quality (egg mass and composition). We additionally investigated whether male attractiveness influenced egg components depending on the clutch size and laying sequence. The testosterone level in eggs from experimental females was positively related to the laying order, whereas control eggs did not show any trend. Our results provided mixed support for the DAH, but nevertheless revealed that female red-legged partridges may adjust their breeding investment according to male carotenoid-based ornamentation.     

Development of a framework for fire risk assessment using remote sensing and geographic information system technologies

Forest fires play a critical role in landscape transformation, vegetation succession, soil degradation and air quality. Improvements in fire risk estimation are vital to reduce the negative impacts of fire, either by lessen burn severity or intensity through fuel management, or by aiding the natural vegetation recovery using post-fire treatments. This paper presents the methods to generate the input variables and the risk integration developed within the Firemap project (funded under the Spanish Ministry of Science and Technology) to map wildland fire risk for several regions of Spain. After defining the conceptual scheme for fire risk assessment, the paper describes the methods used to generate the risk parameters, and presents proposals for their integration into synthetic risk indices. The generation of the input variables was based on an extensive use of geographic information system and remote sensing technologies, since the project was intended to provide a spatial and temporal assessment of risk conditions. All variables were mapped at 1 km² spatial resolution, and were integrated into a web-mapping service system. This service was active in the summer of 2007 for semi-operational testing of end-users. The paper also presents the first validation results of the danger index, by comparing temporal trends of different danger components and fire occurrence in the different study regions.     

Association of urinary or blood heavy metals and mortality from all causes,cardiovascular disease,and cancer in the general population: a systematic review and meta-analysis of cohort studies

Environmental Science and Pollution Research - Amounting epidemiological evidence has shown detrimental effects of heavy metals on a wide range of diseases. However, the effect of heavy metal...     

Soil-erosion and runoff prevention by plant covers in a mountainous area (se spain): Implications for sustainable agriculture

In the Mediterranean region the intensities and amounts of soil loss and runoff on sloping land are governed by rainfall pattern and vegetation cover. Over a two-year period (1998–1999), six wild species of aromatic and mellipherous plants (Thymus serpylloides subsp. Gadorensis, Thymus baeticus Boiss, Salvia lavandulifolia Vahl., Santolina rosmarinifolia L., Lavandula stoechas L. and Genista umbellata Poiret) were selected for erosion plots to determine their effectiveness in reducing water erosion on hillslopes of the Sierra Nevada Mountain (SE Spain). The erosion plots (including a bare-soil plot as control), located at 1,345 m in altitude, were 2 m² (2 m × 1 m) in area and had 13% incline. The lowest runoff and soil erosion rates, ranging from 9 to 26 mm yr⁻¹ and from 0.01 to 0.31 Mg ha⁻¹ yr⁻¹, respectively, over the entire study period, were measured under the Thymus serpylloides. Lavandula stoechas L. registered the highest rates among the plant covers tested, runoff ranging from 77 to 127 mm yr⁻¹ and erosion from 1.67 to 3.50 Mg ha⁻¹ yr⁻¹. In the bare-soil plot, runoff ranged from 154 to 210 mm yr⁻¹ and erosion from 4.45 to 7.82 Mg ha⁻¹ yr⁻¹. According to the results, the lowest-growing plant covers (Thymus serpylloides and Salvia lavandulifolia Vahl.) discouraged the soil erosion and runoff more effectively than did the taller and open medium-sized shrubs (Santolina rosmarinifolia L., Genista umbellata Poiret, Thymus baeticus Boiss and Lavandula stoechas L.). Monitoring allowed more direct linkage to be made between plant covers and the prevention of erosion, with implications for sustainable mountain agriculture and environmental protection.     

新疆煤基压块活性炭在BAC工艺中的应用

鉴于新疆丰富的煤炭资源,本研究对由2种不同指标新疆煤基压块活性炭(LBC和HBC)组成的上向流活性炭柱构成的小试生物活性炭(biological activated carbon, BAC)工艺进行了为期约300 d的实验研究。考察了2种不同指标的压块活性炭柱(LBC-O₃与HBC-O₃)的运行情况。结果表明,LBC-O₃对于COD_Mn的去除效果优于HBC-O₃(进水平均值为1.56 mg·L⁻¹,出水平均值为0.55 mg·L⁻¹);而HBC-O₃对于UV₂₅₄所代表有机物去除效果优于LBC-O₃(进水平均值为0.053 cm⁻¹,出水平均值为0.005 cm⁻¹)。LBC-O₃对COD_Mn的较佳去除性能,促成了活性炭表面微生物量的生长,进而构成了吸附和生物降解的良性循环;而兼具发达次微孔和中孔结构的HBC-O₃对UV₂₅₄代表的有机物表现出了靶向吸附性;微生物检测结果和炭柱出水中溶解性有机物的光谱特性分析验证了该结论。因此,结合目标水体中污染物的特性靶向选择相应指标(孔隙结构)的压块活性炭可取得更佳的BAC工艺处理效果：提高污染物去除率、节约资源,符合双碳目标。