Does forest fragmentation affect the same way all growth-forms?

Fragmentation of natural habitats is one of the main causes of the loss of biodiversity. However, all plants do not respond to habitat fragmentation in the same way due to differences in species traits. We studied the effect of patch size and isolation on the biodiversity of vegetation in the mixed-oak forests in the north of the Iberian Peninsula. The aim was to evaluate whether all the growth-forms of vegetation are equally affected by forest fragmentation in order to improve the management strategies to restore this type of vegetation. This study has shown that the effect of the area and spatial isolation of the patches was not the same for the different growth-forms. Fragmentation had a mainly negative effect on the richness and diversity of forest specialist species, especially ferns and herbaceous growth-forms. Moreover, the presence and/or cover of woodland herbaceous species (such as Lamiastrum galeobdolon and Helleborus viridis) and of woodland ferns (namely Asplenium adiantum-nigrum, Asplenium trichomanes, Polystichum setiferum, Dryopteris affinis) were negatively affected by patch size, possibly due to the reduction of habitat quality. These species have been replaced by more generalist species (such as Cardamine pratensis, Cirsium sp., Pulmonaria longifolia or Rumex acetosella) in small patches. Patch isolation had a negative effect on the presence of forest specialist species (namely, L.?galeobdolon, Frangula alnus, Hypericum androsaemum, A.?adiantum-nigrum and Athyrium filix-femina) and favored colonization by more generalist species such as Cirsium sp., Calluna vulgaris, Erica arborea or Ulex sp. Thus, in this region special attention should be paid to the conservation of forest specialist species, especially ferns and herbs. In conservation policy focused on forest specialist species, the most valuable species in forest ecosystems, conservation of large forest areas should be promoted.     

Land cover changes in the Lachuá region,Guatemala: patterns,proximate causes,and underlying driving forces over the last 50 years

Identifying the patterns of land cover change (LCC) and their main proximate causes and underlying driving forces in tropical rainforests is an urgent task for designing adequate management and conservation policies. The Lachuá region maintains the largest lowland rainforest remnant in Guatemala, but it has been highly deforested and fragmented during the last decades. This is the first paper to describe the patterns of LCC and the associated political and socioeconomic factors in the region over the last 50 years. We estimated spatial and temporal variations in LCC from a random sample of 24 1-km² landscape plots during three time periods (1962–1987, 1987–2006, and 2006–2011) and evaluated how they were related to some important proximate causes and underlying driving forces. During the study period, 55 % of forest cover disappeared, at an annual rate of 1.6 %. The deforestation rate increased from 0.6 % (during the first study period) to 2.8 % (last period), but there was very high spatial variation. Landscape plots located outside conservation areas and close to roads lost between 80 and 100 % of forest cover, whereas the forest cover in landscapes located within protected areas remained intact during the study period. The establishment of new human settlements, roads, and annual crops was the main proximate cause during the first period, but during the second and third periods, open areas were mainly created to establish cattle pastures. Because ~75 % of forest cover has disappeared outside the protected areas, the conservation of this biodiversity hot spot will depend on the expansion of protected areas, and the promotion of forest regrowth and alternative biodiversity-friendly land uses in the landscape matrix.     

Vapor-phase concentrations of PAHs and their derivatives determined in a large city: Correlations with their atmospheric aerosol concentrations

Thirteen PAHs, five nitro-PAHs and two hydroxy-PAHs were determined in 55 vapor-phase samples collected in a suburban area of a large city (Madrid, Spain), from January 2008 to February 2009. The data obtained revealed correlations between the concentrations of these compounds and a series of meteorological factors (e.g., temperature, atmospheric pressure) and physical–chemical factors (e.g., nitrogen and sulfur oxides). As a consequence, seasonal trends were observed in the atmospheric pollutants. A “mean sample” for the 14-month period would contain a total PAH concentration of 13 835 ± 1625 pg m⁻³ and 122 ± 17 pg m⁻³ of nitro-PAHs. When the data were stratified by season, it emerged that a representative sample of the coldest months would contain 18 900 ± 2140 pg m⁻³ of PAHs and 150 ± 97 pg m⁻³ of nitro-PAHs, while in an average sample collected in the warmest months, these values drop to 9293 ± 1178 pg m⁻³ for the PAHs and to 97 ± 13 pg m⁻³ for the nitro-PAHs. Total vapor phase concentrations of PAHs were one order of magnitude higher than concentrations detected in atmospheric aerosol samples collected on the same dates. Total nitro-PAH concentrations were comparable to their aerosol concentrations whereas vapor phase OH-PAHs were below their limits of the detection, indicating these were trapped in airborne particles.     

Ni/Fe-supported over hydrotalcites precursors as catalysts for clean and selective oxidation of Basic Yellow 11: Reaction intermediates determination

In this work, Basic Yellow 11 (BY 11) was employed as model compound to study catalytic wet air oxidation as a pre-treatment step to the conventional biological oxidation. Ni and Fe catalysts supported over hydrotalcite (HT) were prepared by incipient wetness and excess impregnation to obtain catalysts with different metal loadings (from 1 to 10 wt.%). HTs were synthesized by co-precipitation and characterized with XRD, X-ray fluorescence (XRF), BET, thermogravimetric analysis and SEM. Results showed that dye conversion increased with Ni and Fe content up to 7 wt.% and that the most effective catalyst were prepared by incipient wetness impregnation. The influence of metal loading in the catalyst, and the preparation method as well as the reaction conditions was investigated. A mechanism and reaction pathways for BY 11 during catalytic liquid phase oxidation have also been proposed.     

Exploring the potential of applying proteomics for tracking bisphenol A and nonylphenol degradation in activated sludge

A significant percentage of bisphenol A and nonylphenol removal in municipal wastewater treatment plants relies on biodegradation. Nonetheless, incomplete information is available concerning their degradation pathways performed by microbial communities in activated sludge systems. Hydroquinone dioxygenase (HQDO) is a specific degradation marker enzyme, involved in bisphenol A and nonylphenol biodegradation, and it can be produced by axenic cultures of the bacterium Sphingomonas sp. strain TTNP3. Proteomics, a technique based on the analysis of microbial community proteins, was applied to this strain. The bacterium proteome map was obtained and a HQDO subunit was successfully identified. Additionally, the reliability of the applied proteomics protocol was evaluated in activated sludge samples. Proteins belonging to Sphingomonas were searched at decreasing biomass ratios, i.e. serially diluting the bacterium in activated sludge. The protein patterns were compared and Sphingomonas proteins were discriminated against the ones from sludge itself on 2D-gels. The detection limit of the applied protocol was defined as 10^?3 g TTNP3 g^?1 total suspended solids (TSSs). The results proved that proteomics can be a promising methodology to assess the presence of specific enzymes in activated sludge samples, however improvements of its sensitivity are still needed.     

Oxidative stress and arsenic toxicity: Role of NADPH oxidases

The effect of arsenic (25 and 50 μM As for 1 and 5 d) was analysed in wild type (WT) and Arabidopsis thaliana (L.) Heynh plants deficient in NADPH oxidase C (AtrbohC). The content of H₂O₂ and malondialdehyde (MDA) increased with the As concentration, while the opposite effect was found for NO in WT and AtrbohC plants. The As treatment reduced catalase and increased glutathione reductase activities to the same extent in WT and AtrbohC plants, although the induction of all SOD isoforms (mainly CuZn–SODs) was observed in WT plants, the opposite effects being found in AtrbohC plants. Glycolate oxidase (H₂O₂ producers) considerably increased with the concentration and time of treatment with As in WT and AtrbohC mutants. Arsenic induced the uptake and translocation of P, S, Cu, Zn, and Fe in WT plants, while in AtrbohC plants the opposite trend was noted and the uptake of As became considerably lower than in WT plants. These results suggest that As causes oxidative stress by inducing glycolate oxidase, while NADPH oxidase does not appear to participate in ROS overproduction but could be critical in regulating antioxidant defences as well as the transport and translocation of As and macro/micronutrients.     

Relative influence of the dissolved humic material on the solid-phase extraction efficiency of pesticides from environmental water

The effect of organic matter on the solid-phase extraction (SPE) efficiency for pesticides belonging to different chemical groups (urea-derivatives, carbamates and triazines) and having different polarities, was simultaneously studied for the first time in pure and simulated water samples. SPE was carried out in precolumns packed with C18 silica or styrene-divinylbenzene copolymer PLRP-S phases on-line coupled to high performance liquid chromatography (HPLC) analysis. Retention factors in water (k'_W) were estimated for 25 compounds and used for the calculation of the theoretical breakthrough volume (Vb_T) in pure water. Experimental breakthrough volumes (Vb_E) were first determined using purified and deionized water as the matrix for selected compounds having Vb_T < 500 mL; then, the same water with an added humic acid sodium salt (HA) at 0.4–5.6 mg/L of dissolved organic carbon (DOC) content, was used as the matrix for compounds having VbE < 500 mL in pure water. Several polar pesticides showed negative linear or logarithmic Vb_E curves depending on HA content; their recoveries were also determined in environmental samples having low dissolved organic carbon values, between 0.5–6.4 mg/L. A similar behavior was observed for these compounds in simulated and natural water samples, where DOC concentration and the percolated volume (Vp) mainly determine the solute recoveries values. However, the variation of recoveries as a function of DOC content could be negative or null depending on the two examined conditions (Vp lower or larger than Vb_E in pure water). Results demonstrated that breakthrough volume must always be considered to correctly interpret the participation of dissolved humic material on the SPE efficiency of organic micropollutants in water.     

Electro-Fenton degradation of the antibiotic sulfanilamide with Pt/carbon-felt and BDD/carbon-felt cells. Kinetics,reaction intermediates,and toxicity assessment

The degradation of 230 mL of a 0.6-mM sulfanilamide solution in 0.05 M Na₂SO₄ of pH 3.0 has been studied by electro-Fenton process. The electrolytic cell contained either a Pt or boron-doped diamond (BDD) anode and a carbon-felt cathode. Under these conditions, organics are oxidized by hydroxyl radicals formed at the anode surface from water oxidation and in the bulk from Fenton’s reaction between initially added (and then electrochemically regenerated) Fe²⁺ and cathodically generated H₂O₂. From the decay of sulfanilamide concentration determined by reversed-phase liquid chromatography, an optimum Fe²⁺ concentration of 0.20 mM in both cells was found. The drug disappeared more rapidly using BDD than Pt, and, in both cases, it was more quickly removed with raising applied current. Almost total mineralization was achieved using the BDD/carbon-felt cell, whereas the alternative use of Pt anode led to a slightly lower mineralization degree. In both cells, the degradation rate was accelerated at higher current but with the concomitant fall of mineralization current efficiency due to the greater increase in rate of the parasitic reactions of hydroxyl radicals. Reversed-phase liquid chromatography allowed the identification of catechol, resorcinol, hydroquinone, p-benzoquinone, and 1,2,4-trihydroxybenzene as aromatic intermediates, whereas ion exclusion chromatography revealed the formation of malic, maleic, fumaric, acetic, oxalic, formic, and oxamic acids. NH₄ ⁺, NO₃ ^?, and SO₄ ^2? ions were released during the electro-Fenton process. A plausible reaction sequence for sulfanilamide mineralization involving all detected intermediates has been proposed. The toxicity of the solution was assessed from the Vibrio fischeri bacteria luminescence inhibition. Although it acquired its maximum value at short electrolysis time, the solution was completely detoxified at the end of the electro-Fenton treatment, regardless of the anode used.     

Cyprodinil retention on mixtures of soil and solid wastes from wineries. Effects of waste dose and ageing

In spite of its wide-world economic relevance, wine production generates a huge amount of waste that threatens the environment. A batch experiment was designed to assess the effect of the amendment of an agricultural soil with two winery wastes (perlite and bentonite wastes) in the immobilization of cyprodinil. Waste addition (0, 10, 20, 40, and 80 Mg ha^?1) and different times of incubation of soil-waste mixtures (1, 30, and 120 days) were tested. The addition of wastes improved the soil’s ability to immobilize cyprodinil, which was significantly correlated to total C content in soil-waste mixtures. Longer incubation times decreased the cyprodinil sorption possibly due to the mineralization of organic matter but also as a consequence of the high pH values reached after bentonite waste addition (up to 10.0). Cyprodinil desorption increased as the amount of waste added to soil, and the incubation time increased. The use of these winery wastes contributes to a more sustainable agriculture preventing fungicide mobilization to groundwater.     

Arsenic, chromium and mercury removal using mussel shell ash or a sludge/ashes waste mixture

Different batches of valued mussel shell and waste mussel shell ash are characterised. Shell ash has pH?>?12 and high electrical conductivities (between 16.01 and 27.27 dS?m^?1), while calcined shell shows pH values up to 10.7 and electrical conductivities between 1.19 and 3.55 dS?m^?1. X-ray fluorescence, nitric acid digestion and water extractions show higher concentrations in shell ash for most parameters. Calcite is the dominant crystalline compound in this ash (95.6 %), followed by aragonite. Adsorption/desorption trials were performed for mussel shell ash and for a waste mixture including shell ash, sewage sludge and wood ash, showing the following percentage adsorptions: Hg(II) >94 %, As(V) >96 % and Cr(VI) between 11 and 30 % for shell ash; Hg(II) >98 %, As(V) >88 % and Cr(VI) between 30 and 88 % for the waste mixture. Hg and As desorption was <5 % for both shell ash and the waste mixture, while Cr desorption was between 92 and 45 % for shell ash, and between 19 and 0 % for the mixture. In view of that, mussel shell ash and the mixture including shell ash, sewage sludge and wood ash could be useful for Hg(II) and As(V) removal.