Air bag effectiveness as function of impact speed

An investigation was conducted to estimate the effectiveness of air bags as a function of velocity. The study consisted of three parts: a theoretical idealization, an analysis of National Automotive Sampling System/Crashworthiness Data System (NASS/CDS), and a reanalysis of previously published Fatality Analysis Reporting System (FARS) data. The theoretical analysis looked at idealized risk curves as a function of velocity; assuming that the air bag offers a benefit for both belted and unbelted occupants. Analysis of the NASS/CDS data looked at the effectiveness of air bags as a function of velocity for Maximum Abbreviated Injury Scale (MAIS) 3+ injuries. The reanalysis of the previously published FARS data looked at the effectiveness of the air bag as a function of velocity for fatalities. The theoretical analysis indicates that the air bag effectiveness should be greatest at the low velocities. The field data analysis of both NASS/CDS and FARS were consistent with the theoretical analysis, indicating that air bags are most effective at the lower velocities, below 40 kph (25 mph), for both belted and unbelted occupants. Although it was not possible to estimate a different effect for belted and unbelted for fatalities using FARS, it was possible for MAIS 3+ using NASS/CDS. For unbelted occupants the effectiveness goes to zero or becomes negative above 40 kph (25 mph) for MAIS 3+, and for belted occupants the effectiveness stays positive but with significantly lower magnitude for speeds above 40 kph (25 mph).     

Modeling flow and nitrate fate at catchment scale in Brittany (France)

In the intensive pig-farming (Sus scrofa) area of Brittany (western France), many surface and subsurface water resources are contaminated by nitrate (NO3) with concentrations that chronically exceed the European Community 50 mg L(-1) drinking standard. To ensure sustainable water supply, the fate of NO3 must be considered in both surface water and ground water. The fate of N was investigated in a Britain catchment, the Co?t-Dan watershed, with an integrated management tool: the hydrological SWAT model coupled with the ground water model MODFLOW, and its companion contaminant and solute transport model MT3DMS. The model was validated with respect to water quantity during a 6-yr period and for the NO3 concentration during a 44-mo period, at two gauging stations in the catchment. The coupled models reproduced accurately the measurements. At the basin outlet, the Nash-Sutcliffe coefficients were 0.88 for monthly flow for the entire period and 0.87 for monthly N load. Alternative scenarios were simulated and showed potential benefits of decreasing manure application from 210 to 170 kg N ha(-1) as required by the European Commission Nitrates Directive.     

Aggregating the benefits of environmental improvements: distance-decay functions for use and non-use values

One of the main problems in using environmental cost-benefit analysis is deciding on the relevant population: whose benefits should we count? This is important since aggregate benefits depend on both per-person benefit and the number of beneficiaries. Yet this latter term is often hard to evaluate. Distance-decay functions are one way of addressing this problem. In this paper, we present estimates of distance-decay functions for a particular environmental improvement, namely a reduction in low flow problems on the River Mimram in Southern England. We do this both for users and non-users, in the context of a contingent valuation study of the benefits of improving low flow conditions. We test whether distance-decay effects for mean Willingness to Pay are stronger for a single environmental good (the River Mimram, in this case) than for a more inclusive set (here, all rivers in Thames region which suffer from low flow problems). Finally, we explore the impact on part-whole bias, in terms of the relationship between WTP for an individual site and WTP for a more inclusive group of sites, of allowing for distance-decay effects.     

Alteration in rhizosphere soil properties of afforested Rhamnus lycioides seedlings in short-term response to mycorrhizal inoculation with Glomus intraradices and organic amendment

The reestablishment of autochthonous plant species is an essential strategy for recovering degraded areas under semiarid conditions. A field experiment was carried out to assess the short-term effect of two reafforestation methods involving mycorrhizal inoculation and compost addition on soil quality parameters and Rhamnus lycioides seedling growth. The nutrient content (NPK) and enzymatic activities (dehydrogenase, urease, protease-BAA, acid phosphatase and beta-glucosidase) increased and bulk density decreased in the rhizosphere soil with the organic amendment. Biomass C of rhizosphere soil increased by at least 240% with respect to the control soil after mycorrhizal inoculation and the combination of compost addition + mycorrhizal inoculation. Both mycorrhizal inoculation and composted organic residue addition increased R. lycioides seedling growth in the same proportion. In the short term, we conclude that the application of both reafforestation methods not only enhances the establishment of R. lycioides seedlings, but also improves soil quality.     

Waste ecocompatibility in storage and reuse scenarios: global methodology and detailed presentation of the impact study on the recipient environments

In 1995, the ADEME launched a research program called "Waste Ecocompatibility" in order to define a reliable methodology for measuring the impact of waste in storage or reuse scenarios. The French concept of "Ecocompatibility" is defined as the situation where the pollutant flux from waste disposed of or used in specified conditions is compatible with the environmental acceptance of the receiving environments. The chief feature of this definition is to integrate the evaluation of the three following terms: pollutants emission from the waste, transport of the pollutants from the waste to the receptor cells and the environmental acceptance of the receiving environments. The "Waste Ecocompatibility" program consisted of a literature survey and an experimental part. The literature study aimed to determine factors and waste characteristics to be considered for a reliable ecocompatility assessment, to provide an overview of the available tools for measuring those factors and characteristics and to propose a first approach of the methodology. In the framework of the experimental program, this approach was then applied to three theoretical scenarios to validate the laboratory tools (comparative study of laboratory and field results) and to calibrate the global methodology. This paper deals with the results of the experimental program concerning the impact study on receiving environments: impact on plants and microorganisms living in soil, impacts on soil fauna and aquatic fauna. In other papers we intend to present the operational methodology for the assessment of waste ecocompatibility. It includes bio-assays at laboratory scale (microcosms), pilot scale (mesocosms) and in situ experiments (experimental prairie). To limit the use of in situ experiments other research works are necessary to validate bio-assays at laboratory or pilot scale.     

Leaching of inorganic contaminants from cement-based waste materials as a result of carbonation during intermittent wetting

Characterization of the leaching behavior of wastes is a crucial step in the environmental assessment for reuse or disposal scenarios. The release of inorganic contaminants from waste materials is typically evaluated by tank leaching of continuously water-saturated material. However, materials, in many field or management scenarios, experience cyclic wetting and drying under varied environmental conditions (i.e. variable relative humidity, atmospheric CO2 or CO2 from biologic activities). During periods of storage in an unsaturated environment, many processes may occur that can influence the release potential and release rate of inorganic constituents. The research presented here was carried out to examine how the phenomena of carbonation during drying influence the release of inorganic contaminants from Portland cement-based materials during cyclic wetting and storage. Batch equilibrium leaching tests were used to determine constituent solubility as a function of pH. Dynamic leaching tests on monolithic material were carried out to determine the rate of constituent release as a function of leaching time and intermittent storage conditions. This paper presents the results observed for three typical waste constituents, arsenic, cadmium and lead.     

Retention equations of nonionic organic chemicals in soil column chromatography with methanol-water eluents

Research efforts dealing with chemical transportation in soils are needed to prevent damage to ground water. Methanol-containing solvents can increase the translocation of nonionic organic chemicals (NOCs). In this study, a general log-linear retention equation, log k' = log k'w - Sphi (Eq. [1]), was developed to describe the mobilities of NOCs in soil column chromatography (SCC). The term phi denotes the volume fraction of methanol in eluent, k' is the capacity factor of a solute at a certain phi value, and log k'w and -S are the intercept and slope of the log k' vs. phi plot. Two reference soils (GSE 17204 and GSE 17205) were used as packing materials, and were eluted by isocratic methanol-water mixtures. A model of linear solvation energy relationships (LSER) was applied to analyze the k' from molecular interactions. The most important factor determining the transportation was found to be the solute hydrophobic partition in soils, and the second-most important factor was the solute hydrogen-bond basicity (hydrogen-bond accepting ability), while the less important factor was the solute dipolarity-polarizability. The solute hydrogen-bond acidity (hydrogen-bond donating ability) was statistically unimportant and deletable. From the LSER model, one could also obtain Eq. [1]. The experimental k' data of 121 NOCs can be accurately explained by Eq. [1]. The equation is promising to estimate the solute mobility in pure water by extrapolating from lower-capacity factors obtained in methanol-water mixed eluents.     

The true distribution and accumulation of radiocaesium in stem of Scots pine (Pinus sylvestris L.)

The radial and vertical distributions of radiocaesium, potassium and calcium were determined in two Scots pine stands (17 and 58 yr old) similarly affected by the Chernobyl fallout. For both age classes, concentrations are always the lowest in the stemwood, highest in the inner bark and intermediary levels were observed for the outer bark. Due to the cumulative character of its biomass. however. stemwood is a long-term major reservoir of 137Cs. With tree development, changes in the 137Cs radial distribution are well described by variations in the sap ascent pattern and reveal an important transfer between tree rings. It is shown that. both the biomass evolution and knowledge of the evolution of the 137Cs radial gradient are important to predicting 137Cs accumulation in wood with time. According to the common transfer factor (TF) approach, one would expect a decrease in radiocaesium accumulation with time (from 0.0047 +/- 0.0013 to 0.0035 +/- 0.0008 m2kg(-1) for the 17 and 58 yr old trees, respectively). With the wood immobilisation potential (WIP) approach, it was, however, clearly shown that additional annual uptake was highest for the older stand (3.12 +/- 0.23 Bq cm(-3) yr(-1) for the 58-year-old stand compared to 1.99 +/- 0.30 Bq cm(-3) yr(-1) for the younger stand). Following the WIP approach, it was moreover possible to distinguish between the 137Cs incorporated via the root uptake process and a possible lasting effect of interception. It is shown that, whereas for the younger stand (5 yr old at the time of the accident) root uptake contributed exclusively to the wood contamination, the former process explained only 48% of the measured total 137Cs content in the wood of the older tree.     

Transfer of 137Cs and 60Co from irrigation water to a soil-tomato plant system

An experiment has been performed at the nuclear power plant of Garigliano (Caserta, Italy), aiming at the measurement of transfer factors of 137Cs and 60Co radionuclides from the irrigation water to a soil-plant system, with particular attention to the influence on such transfers of the irrigation technique (ground or aerial). Tomato plants were irrigated weekly with water contaminated with 137Cs and 60Co (about 375 Bq/m2 week), using both irrigation techniques. After 13 weeks, fruits, leaves, stems, roots and soil were sampled, and radionuclide concentrations were measured by high-resolution gamma spectroscopy. It was found that the activity allocated to the plant organs is significantly dependent upon the irrigation technique, amounting to 2.1% and 1.6% of the activity given in the cultivation for aerial treatment and 0.4% and 0.3% for the ground treatment, for 137Cs and 60Co respectively. The activity absorbed by plants is allocated mainly in leaves (> 55%), while less then 10% is stored in the fruits, for both irrigation techniques. Transfer factors (soil-plant and irrigation water-plant) of tomato plants and of weeds have been determined for 137Cs and 60Co, as well as for natural 40K in the soil.     

Use of 129I and 137Cs in soils for the estimation of 131I deposition in Belarus as a result of the Chernobyl accident

Using radioactivity measurements for 131I and 137Cs and nuclear activation analysis (NAA) or accelerator mass spectrometry (AMS) for 129I, ratios of 131I/137Cs and 129I/137Cs have been determined in soils from Belarus. We find that the pre-Chernobyl ratio of 129I/137Cs in Belarus is significantly larger than expected from nuclear weapons fallout. For the Chernobyl accident, our results support the hypothesis that there was relatively little fractionation of iodine and caesium during migration and deposition of the radioactive cloud. For sites having 137Cs > 300 Bq/kg, 129I can potentially give more reliable retroactive estimates of Chernobyl 131I deposition. However, our results suggest that 137Cs can also give reasonably good (+/-50%) estimates for 131I in Belarus.