Elemental characterization of PM10, PM2.5 and PM1 in the town of Genoa (Italy)

The particulate matter (PM) concentration and composition, the PM10, PM2.5, PM1 fractions, were studied in the urban area of Genoa, a coastal town in the northwest of Italy. Two instruments, the continuous monitor TEOM and the sequential sampler PARTISOL, were operated almost continuously on the same site from July 2001 to September 2004. Samples collected by PARTISOL were weighted to obtain PM concentration and then analysed by PIXE (particle induced X-ray emission) and by ED-XRF (energy dispersion X-ray fluorescence), obtaining concentrations for elements from Na to Pb. Some of the filters used in the TEOM microbalance were analysed by ED-XRF to calculate Pb concentration values averaged over 7-30 d periods.     

Acute effects of 3,4-dichloroaniline on biomarkers and spleen histology of the common goby Pomatoschistus microps

The aromatic amine 3,4-dichloroaniline (DCA) is a model environmental contaminant, precursor for synthesis and degradation product of several herbicides, which is commonly found in European estuarine ecosystems. In this work, the possibility of using biochemical and histological markers to assess sub-lethal effects of DCA in natural populations of Pomatoschistus microps juveniles was investigated. Alterations on the activities of the enzymes acetylcholinesterase (AChE), lactate dehydrogenase (LDH) and glutathione S-transferase (GST) and histological alterations on spleen were investigated after 96 h of exposure to sublethal concentrations of DCA (0.50-1.49 mg/l). At the concentrations tested, DCA had no effect on AChE activity. LDH and GST activities were significant altered in treated animals when compared to control groups. As already described for mammals, DCA induced splenic histological alterations in P. microps, including expansion of red pulp and deposition of hemosiderin granules in a concentration-dependent manner. This suggests that DCA is a xenobiotic of concern in estuaries receiving agricultural effluents.     

Degradation of CL-20 by white-rot fungi

In previous studies, we found that the emerging energetic chemical, CL-20 (C6H6N12O12, 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane), can be degraded following its initial denitration using both aerobic and anaerobic bacteria. The C and N mass balances were not determined due to the absence of labeled starting compounds. The present study describes the degradation of the emerging contaminant by Phanerochaete chrysosporium using ring-labeled [15N]-CL-20 and [14C]-CL-20. Ligninolytic cultures degraded CL-20 with the release of nitrous oxide (N2O) in amounts corresponding to 45% of the nitrogen content of CL-20. When ring-labeled [15N]-CL-20 was used, both 14N14NO and 15N14NO were observed, likely produced from -NO2 and N-NO2, respectively. The incubation of uniformly labeled [14C]-CL-20 with fungi led to the production of 14CO2 (> 80%). Another ligninolytic fungus, Irpex lacteus, was also able to degrade CL-20, but as for P. chrysosporium, no early intermediates were observed. When CL-20 was incubated with manganese peroxidase (MnP), we detected an intermediate with a [M-H]- mass ion at 345 Da (or 351 and 349 Da when using ring-labeled and nitro-labeled [15N]-CL-20, respectively) matching a molecular formula of C6H6N10O8. The intermediate was thus tentatively identified as a doubly denitrated CL-20 product. The concomitant release of nitrite ions (NO2-) with CL-20 degradation by MnP also supported the occurrence of an initial denitration prior to cleavage and decomposition.     

Influence of the very polluted inputs of the Tinto-Odiel system on the adjacent littoral sediments of southwestern Spain: a statistical approach

A spatial and temporal analysis (period 1990-2003) of 15 sampling points distributed along the southwestern Spanish coast permits to delimitate the influence area of the extremely polluted discharges coming from the Tinto-Odiel system in the bottom sediments of the adjacent littoral area. As, Cu, Pb and Zn are the main heavy metals transported by the freshwater runoffs toward the shallow shelf and present very high negative (r < -0.7) and significant (p < 0.001) correlations with the distance to the estuarine mouth. The statistical analysis (index of geoaccumulation, Pearson correlation matrix, cluster analysis) of their concentrations in the littoral sediments located between the Guadiana and Guadalquivir mouths delimitates three zones: (a) Zone 1 (from the estuarine mouth to 6 km to the east), characterized by moderate to strongly polluted bottom sediments and main responsible of the mean annual variations of the former heavy metals in the area studied; (b) Zone 2 (from 21.2 km to the west to 29 km to the east), characterized by moderate pollution levels; and (c) Zone 3, located near the Guadiana and Guadalquivir mouths, with very low As-Cu-Pb contents and unpolluted to moderately levels of Zn due to urban sewages or the presence of local low mobility areas for this element.     

Copper binding by peat fulvic and humic acids extracted from two horizons of an ombrotrophic peat bog

We studied the binding of Cu(II) to humic acids and fulvic acids extracted from two horizons of an ombrotrophic peat bog by metal titration experiments at pH 4.5, 5.0, 5.5, and 6.0 and 0.1 M KNO3 ionic strength. Free metal ion concentrations in solution were measured using an ion selective electrode. The amounts of base required to maintain constant pH conditions were recorded and used to calculate H+/Cu2+ exchange ratios. The amount of Cu(II) bound to the humic fractions was greater than the amount bound to the fulvic fractions and only at the highest concentrations of metal ion the amount of Cu(II) sorbed by both fractions became equal. The proton to metal ion exchange ratios are similar for all humic substances, with values ranging from 1.0 to 2.0, and decreasing with increased pH. The amount of Cu(II) bound is practically independent of the horizon from which the sample was extracted. The results indicate that the humic substances show similar cation binding behaviour, despite the differences in chemical composition. The copper binding data are quantitatively described with the NICA-Donnan model, which allows to characterize only the carboxylic type binding sites. The values of the binding constants are higher for the humic acids than for the fulvic acids.     

Effects of medium-pressure UV lamps radiation on water quality in a chlorinated indoor swimming pool

The aim of our study was to determine the impact of medium-pressure UV lamps radiation on water quality in a chlorinated indoor swimming pool. An indoor swimming pool was equipped with two medium-pressure UV lamps. We collected eight samples of water daily over a four-weeks period and measured total and free chlorine, pH, water temperature, bacteriological parameters, total organic carbon and trihalomethanes. During the first week, which served as control, medium-pressure UV lamps were turned off. During the next three weeks, medium-pressure UV lamps were kept on 24 h per day. The third week, we reduced the level of the injected chlorine into water, and the last week we also reduced the water renewal volume by 27%. Our results showed that bacteriological parameters remained within allowable french limits. When medium-pressure UV lamps were kept on, total, free and active chlorine levels were significantly increased (P<0.001), whereas combined chlorine level were significantly decreased (P<0.001 and P<0.05, respectively). The levels of chloroform and bromodichloromethane were significantly increased when medium-pressure UV lamps were kept on (P<0.001), whereas chlorodibromomethane and bromoform levels significantly decreased (P<0.05 and P<0.001, respectively). The additional formation of chloroform and bromodichloromethane may be explained by the increase in active chlorine and by radicalizing mechanisms initiated by UV radiation.     

Role of cyanobacteria in the biodegradation of crude oil by a tropical cyanobacterial mat

Cyanobacterial mats are ubiquitous in tropical petroleum-polluted environments. They form a high biodiversity microbial consortium that contains efficient hydrocarbons degraders. A cyanobacterial mat collected from a petroleum-contaminated environment located in Indonesia was studied for its biodegradation potential. In the field, the natural mat was shown to degrade efficiently the crude oil present in the environment. This natural mat demonstrated also a strong activity of degradation on model crude oil under laboratory conditions. In axenic cultures, the monospecific cyanobacterium Phormidium animale that constitute the bulk of the biomass did not exhibit any degradative capacity on hydrocarbons in the range of C13-C35 carbon atom number either in autotrophic or heterotrophic conditions. It was concluded that this cyanobacterial strain living on a heavily contaminated site had no direct effect on biodegradation of crude oil, the degradation activity being exclusively achieved by the other microorganisms present in the microbial consortium of the mat.     

Cadmium concentration in tobacco (Nicotiana tabacum L.) from different countries and its relationship with other elements

Cadmium accumulation in crop plants, such as tobacco (Nicotiana tabacum L.), can lead to human exposure to this carcinogenic metal. To better define actual Cd distribution in cured or processed tobacco leaves from chief tobacco-producing regions, we analyzed 755 leaf samples of three major types (Flue-cured, Burley, and Oriental) obtained from 13 countries during 2001-2003. This survey may help identify regions with low- or high-Cd concentrations in tobacco to obtain insight into the cause of the concentration extremes and to assist in defining strategies to reduce Cd in tobacco. Cadmium concentrations in the samples ranged from 0 to 6.78 microg g(-1), as determined by ICP-MS. Significant differences were found among types and among countries, but significant interactions between type and country were found. Variations in Cd concentrations were also found in all countries. Our results suggest an important contribution of the field (e.g., bioavailable Cd in soil, other soil characteristics) to the Cd concentration in tobacco. Finally, the correlation between the concentration of Cd and that of other elements differed among the types, which could be effectively discriminated based on the concentrations of 20 elements.     

Estimation of 1999-2004 dietary daily intake of PCDDs, PCDFs and dioxin-like PCBs by a total diet study in metropolitan Tokyo, Japan

A study of the dietary intake of dioxins, consisting of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) through foods retailed in the metropolitan Tokyo area from 1999 to 2004 was carried out by the total diet-market basket method on the basis of food classification (14 groups) and the data on food consumption in the Tokyo region obtained from the Japan Nutrition Survey. The daily intake of dioxins per kg of body weight for a 50 kg average adult body was 2.18 pg TEQ/kg/day in 1999, 1.87 pg TEQ/kg/day in 2000, 1.25 pg TEQ/kg/day in 2001, 1.60 pg TEQ/kg/day in 2002 and 2003 and 1.55 pg TEQ/kg/day in 2004, respectively. These amounts were less than the tolerable daily intake (TDI) of 4 pg TEQ/kg/day for dioxins established in Japan. The dioxins taken daily through fish and shellfish (group 10) accounted for more than 50% of sum WHO-TEQs. In addition, more than 90% of the daily intake of dioxins was taken through fish and shellfish (group 10), meat and eggs (group 11), milk and dairy products (group 12). Also, this study clearly showed that the ratio of dioxin-like PCBs in the daily intake of dioxins was increasing yearly because the reduction rate of dioxin-like PCBs was lower than that of PCDDs and PCDFs in foods.     

Role of surface functionality in the adsorption of anionic dyes on modified polymeric sorbents

While synthetic polymeric sorbents effectively treat dye wastewaters by adsorption, the underlying mechanisms remain to be understood. This work determined the adsorption of an anionic dye by three polymers differing significantly in surface functionality. Surface functional groups of polymers were indicated in FTIR spectra and quantified by the Boehm titration. In reference to the commercial sorbent XAD-4 with a low degree of functionality, the laboratory synthesized NG-8 had primarily acidic functional groups, whereas its aminated product MN-8 had mainly basic amino groups. Electrophoresis determined the points of zero charge of 4.18, 3.23, and 4.51 for XAD-4, NG-8, and MN-8, respectively. The adsorption of Reactive Black 5 dye (RB5) by all the sorbents on a unit surface area basis increased with decreasing pH. At the same low pH (4.40), the adsorption by NG-8 was similar to that by XAD-4, indicating little influence of protonated (neutral) surface functional groups. In contrast, the adsorption by NG-8 at pH 6.05 was 75% lower than that by XAD-4, resulting apparently from the strong electrostatic repulsion between RB5 and deprotonated (negative) groups. Amination substantially enhanced RB5 adsorption by eliminating acidic groups and creating a positive charge on the surface of MN-8. The adsorptive enhancement was also achieved in the presence of CaCl2, due presumably to the neutralization of negative surface charge by Ca2+ and the RB5-Ca2+ pairing. These results manifest the important role of surface functionality in the adsorption of dyes by synthetic polymers.