Use of questionnaires and an expert panel to judge the environmental consequences of chemical spills for the development of an environment-accident index

Assessing the environmental consequences of a chemical accident is a complex task. To date, the methods used to evaluate the environmental effects of an acute release of a chemical have often been based on measurements of chemical and physical variables deemed to be important, such as the concentration of the chemical. However, a broader strategy is needed to predict the environmental consequences of potential accidents during the planning process. An Environment-Accident Index (EAI), a simple tool based on such a strategy, has been developed to facilitate the consideration of a multitude of influential variables. The objectives of this study were to evaluate whether questionnaire-based expert panel's judgements could provide useful data on the environmental consequences of chemical spills, and an effective basis for further development of the EAI. As expected, the judgements did not agree perfectly, but they do give rough indications of the environmental effects, and highlight consistent trends that should be useful inputs for planning, prevention and decontamination processes. The different accidents were also judged to have caused everything from minor to very major effects in the environment, implying that a wide range of accident scenarios were represented in the material and covered by the EAI. Therefore, questionnaires and expert panel judgements can be used to collect useful data for estimating the likely environmental consequences of chemical accidents and for further development of the EAI.     

Sorption of phenol and 4-chlorophenol onto pumice treated with cationic surfactant

The anaerobic digestion rate for flocculated sludge has been considered to be lower than that of original sludge, particularly in the later stages of digestion; attributed this relatively slower rate to the increased mass transfer resistance for reactants through the large flocs after flocculation. This study confirmed that methane production was retarded by flocculation. The structure of the floc was identified with fluorescence in situ hybridization (FISH) and a confocal laser scanning microscope (CLSM) technique. To verify the mass transfer resistance induced by flocculation, microsensors were applied to assess the response of oxygen concentration distribution inside the flocs that are subjected to sudden changes in ambient oxygen levels. Response time for the electrode at a floc's center was five times greater than the response time in original sludge flocs. Although the effective diffusivity of oxygen in the floc increased by 2.3 times after flocculation, the increased size of the flocculated floc was the major contributor to the total mass transfer resistance to oxygen.     

The fate of endosulfan in water

Although the use of endosulfan to control cotton pests has declined, this insecticide still has widespread application in agriculture and can contaminate riverine systems as runoff from soil or by aerial deposition. The degradation of endosulfan in pure water at different pH values of 5, 7 and 9 and in river water from the Namoi and the Hawkesbury rivers of New South Wales (NSW), Australia, was studied in the laboratory. Endosulfan transformation into endosulfan sulfate in river water using artificial mesocosms was also investigated. The results show endosulfan is stable at pH 5, with increasing rates of disappearance at pH 7 and pH 9 by chemical hydrolysis. Incubation of endosulfan with river water at pH 8.3 resulted in the disappearance of endosulfan and the formation of endosulfan diol due to the alkaline pH as well as formation of endosulfan sulfate. Although the degradation of endosulfan by Anabaena, a blue-green alga, did not result in the transformation of endosulfan to endosulfan sulfate, we conclude that other microorganisms catalyzed the formation of the sulfate. Significant conversions of endosulfan into endosulfan sulfate were also reported from associated field studies using artificial mesocoms containing irrigation water from rivers inhabitated by micro-macro fauna. From these results, we conclude that the presence of endosulfan sulfate in river water cannot be used to distinguish contamination by runoff from soil from contamination by aerial drift or redeposition.     

Real-time measurements of jet aircraft engine exhaust

Particulate-phase exhaust properties from two different types of ground-based jet aircraft engines--high-thrust and turboshaft--were studied with real-time instruments on a portable pallet and additional time-integrated sampling devices. The real-time instruments successfully characterized rapidly changing particulate mass, light absorption, and polycyclic aromatic hydrocarbon (PAH) content. The integrated measurements included particulate-size distributions, PAH, and carbon concentrations for an entire test run (i.e., "run-integrated" measurements). In all cases, the particle-size distributions showed single modes peaking at 20-40nm diameter. Measurements of exhaust from high-thrust F404 engines showed relatively low-light absorption compared with exhaust from a turboshaft engine. Particulate-phase PAH measurements generally varied in phase with both net particulate mass and with light-absorbing particulate concentrations. Unexplained response behavior sometimes occurred with the real-time PAH analyzer, although on average the real-time and integrated PAH methods agreed within the same order of magnitude found in earlier investigations.     

Environmental diagnosis methodology for municipal waste landfills

A large number of countries are involved in a process of transformation with regard to the management of municipal solid waste. This process is a consequence of environmental requirements that occasionally materialise in legislation, such as the European Council Directive 31/99/EC on waste release in the European Union. In some cases, the remediation of old landfills can be carried out in compliance with environmental requirements; in other cases, it is necessary to proceed with the closure of the landfill and to assimilate it into its own environment. In both cases, it is necessary to undertake a diagnosis and characterisation of the impacted areas in order to develop an adequate action plan. This study presents a new methodology by which environmental diagnosis of landfill sites may be carried out. The methodology involves the formulation of a series of environmental indeces which provide information concerning the potential environmental problems of the landfills and the particular impact on different environmental elements, as well as information related to location, design and operation. On the basis of these results, it would be possible to draw up action plans for the remediation or closure of the landfill site. By applying the methodology to several landfills in a specific area, it would be possible to prioritize the order of actions required.     

Predictions of binary sorption isotherms for the sorption of heavy metals by pine bark using single isotherm data

The adsorption of three heavy metal ions by pine bark was studied. The study was divided into two parts; single component adsorption of the metals Cu2+, Cd2+ and Ni2+ and bisolute adsorption of the three binary systems Cu2+-Cd2+, Cu2+-Ni2+ and Cd2+-Ni2+. Extended Langmuir model, extended Freundlich model. Sips model and ideal adsorption solution theory (IAST) models were used to predict the equilibrium uptake for Cu2+, Cd2+ and Ni2+ in the binary diluted solutions using the single adsorption constants. The experimental data of single isotherm adsorption process were found to follow Langmuir isotherm model with less accuracy than Freundlich and Sips models. Whereas, the predictions of bisolute adsorption isotherms of the mentioned three systems, Cu2+-Cd2+, Cu2+-Ni2+ and Cd2+-Ni2+, showed good agreement with experimental data when using Extended-Langmuir, Extended-Freundlich and IAST. However, the only good fit of the Sips model was with the Cu2+-Cd2+ system.     

水中总汞量的估测(摘要)

用现有的设备、以冷蒸汽无焰原子吸收法能快速测定低浓度的汞。但是,在测定前,必须将全部汞转化成有机态的汞,还必须去除能结合汞的有机物,而且需在没有汞挥发或吸附损失下进行。下面介绍用化学氧化法和光分解法获得的经验及其结果。     

微分脉冲极谱法测定砷(Ⅲ)、砷(Ⅴ)、和总无机砷

以微分脉冲极谱法完成了对砷(Ⅲ)、砷(Ⅴ)和总无机砷化学形态的测定。砷(Ⅲ)可直接在1M高氯酸或1M盐酸中测定。用煮沸的亚硫酸氢钠溶液将电活性低的砷(Ⅴ)预还原后,可在上述任何一种支持电解质中测定总无机砷。总无机砷与砷(Ⅲ)之差为砷(Ⅴ)。砷(Ⅴ)的浓     

高生长速率下高声学Q石英的生长

水热生长的合成石英中高的声损失严重地降低其可用性,特别是对于高频应用更是如此。早巳知悉,声损失是与碱性生长溶液中以(OH)~-形式进入晶格的间隙 H~ 有关的,H~ 则是为了补偿晶格中 Si~( 4)位置上存在的非正四离子(Fe~( 3)、Fe~( 2)、Cu~( 2)、Al~( 3))的。