Occurrence of aminopolycarboxylates in the aquatic environment of Germany

Aminopolycarboxylic acids, such as ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), diethylenetriaminepentaacetic acid (DTPA), 1,3-propylenediaminetetraacetic acid (1,3-PDTA), beta-alaninediacetic acid (beta-ADA), and methylglycinediacetic acid (MGDA), are used in large quantities in a broad range of industrial applications and domestic products in order to solubilize or inactivate various metal ions by complex formation. Due to the wide field of their application, their high polarity and partly low degradability, these substances reach the aquatic environment at considerable concentrations (in the microg/L-range) and have also been detected in drinking water. This review evaluates and summarizes the results of long-term research projects, monitoring programs, and published papers concerning the pollution of the aquatic environment by aminopolycarboxylates in Germany. Concentrations and loads of aminopolycarboxylates are presented for various types of water including industrial and domestic waste waters, surface waters (rivers and lakes), raw waters, and drinking waters.     

Modeling of gas-phase photodegradation of chloroform and carbon tetrachloride

The relationship between the irradiance in a photoreactor and the rate of photodegradation of organics is essential in the scaling-up of photoreactors to treat large volumes of air contaminated with organic pollutants. In this study, the analysis is adopted to compare results obtained from two different photoreactors. Initially, the applicability of two light models in calculating the irradiance in two photoreactors was evaluated. Thereafter, kinetic models of ultraviolet (UV) photooxidation of chloroform (CHCl3) and carbon tetrachloride (CCl4) from the archived literature were tested using experimental data under various operating conditions and different irradiances. Sensitivity analyses were conducted using different values of model parameters to determine the significance of each parameter on the photodegradation of the two chlorinated organics. For compounds that undergo photolysis as a primary mode of degradation, the rate of photodegradation at low initial concentrations can be predicted easily by the following equation: d[C]/dt = -2.303Iave, lambdaepsilonlambdaphilambda[C]. Although the photodegradation of chlorinated organic compounds in dry and humid air can be predicted well, it is difficult to predict the Cl* sensitized oxidation occurring at high initial concentrations. A good agreement between the simulated and experimental data provides a sound basis for the design of large-scale reactors.     

Heavy metals extraction from contaminated soil: recovery of the flushing solution

The optimum conditions for the recovery of copper from a contaminated soil by using the soil flushing technique are evaluated. Tests on a soil artificially contaminated with copper chloride were carried out in order to evaluate the influence of the speed of percolation and of the chelating agent concentration (aqueous solution of an ethylendiaminotetraacetic acid di-sodium salt Na2-EDTA). At pH=7.3 an efficiency up to 93.9% for copper extraction was achieved by flushing 500 ml of Na2-EDTA 0.05 M solution and 100 ml of pure water at 0.792 cm/h. At these operating conditions the formation of EDTA complexes with other competitive cations (calcium and iron) was negligible. The experimental results were in agreement with the ones obtained using a model describing the chemistry of metal extraction. This model assessed that above pH=6 the formation of calcium and iron EDTA complexes was excluded and only the chelation of copper was allowed. The recovery of 91.6% of EDTA was also achieved by evaporating and acidifying the extracted solution: after filtration, solid EDTA was obtained, through the addition of sodium hydroxide Na2-EDTA. About 99.5% of the extracted copper was finally precipitated under alkaline conditions from the liquid phase.     

Manure management effects on grass production, nutritive content, and soil nitrogen for a grass silage-based dairy farm

Legislation in the United States has recently focused on improving water quality by establishing management practices that limit the quantities of nutrients entering the water supply. Timely application and quantification of the amount of manure applied throughout the grass-growing season can reduce the loss of nutrients into ground or surface water while improving the quality and quantity of grass harvested. During the 2001 and 2002 growing seasons, we measured the effects of different manure application rates on grass yields, grass nutritive value, and soil chemistry on a dairy farm. On-farm estimates of manure N were combined with yield estimates and forage quality measures to evaluate the effects of varying levels of manure application. Yield estimates, N content of grass, and the amount of N in soil and manure were monitored at each cutting for plots amended at different manure application rates. There are three major outcomes of this evaluation: (i) new grass seedings were at higher risk of elevated levels of nitrate N in forage; (ii) increased forage nitrate N at harvest was associated with malfermented silage and increased levels of ammonia N, which resulted in less efficient use of metabolizable protein for milk production; and (iii) increased understanding of N cycling between manure, soil, and plant provided an opportunity to reduce purchased fertilizer.     

Role of active floodplains for nutrient retention in the river Rhine

We evaluated the importance of floodplains for nutrient retention in two distributaries of the river Rhine (Waal and IJssel) by monitoring N and P retention in a body of water during downstream transport. We hypothesized that (i) retention of P is much larger than retention of N and (ii) nutrient retention increases with an increasing amount of the discharge flowing through floodplains (QF). The second hypothesis was tested by comparing retention between the rivers Waal (low QF) and IJssel (high QF), as well as at different discharges. Total nitrogen (TN) did not decrease significantly during downstream transport in both rivers, whereas 20 to 45% of total phosphorus (TP) disappeared during transport in the river IJssel. This difference between N and P retention-supporting the first hypothesis-was probably caused by differences in sedimentation through a much lower proportion of N adsorbed to particles than of P (2-3% of N vs. 50-70% of P). Phosphorus retention was only observed in the IJssel and not in the Waal, and absolute P retention (g P s(-1) km(-1)) in the IJssel increased with increasing QF. The second hypothesis was, nevertheless, not fully supported, because the percentage P retention (% of P load) decreased (instead of increased) with increasing QF. The percentage P retention increased with decreasing river depth and flow velocity; it seemed related to the efficiency of sediment trapping.     

Recovery of valuable metals from electronic and galvanic industrial wastes by leaching and electrowinning

In the present paper, a study on laboratory scale to perform a treatment for valuable metals recovery from electronic and galvanic industrial wastes, is reported. The characterisation of the waste, performed by XRD, SEM, EDX and chemical analysis, showed a high metals content in the sludge, such as Cu, Ni, Mn, Pb, Sn, W. A leaching process, coupled by electrowinning, is then proposed in order to reduce the volume of the waste material and to recover selectively valuable metals, such as Cu and Ni. During the leaching step, carried out by using H(2)SO(4), several factors were investigated (acid concentration, temperature and time of treatment). The leached liquor has been successfully treated with an electrowinning process, to recover copper and nickel. The copper and nickel depositions, were performed in acid and alkaline conditions, respectively. The Faraday yield was of about 95%. The energy consumption was 2.13 and 4.43 kWh per kg of copper and nickel recovered, respectively. At the end of the process, about 94-99% of the initial content of Cu and Ni was recovered at the cathode. The experimental results obtained, showed the technical feasibility of the process.     

Assessing soil biodiversity across Great Britain: national trends in the occurrence of heterotrophic bacteria and invertebrates in soil

An assessment of the biodiversity of soils was a component of the Countryside Survey 2000 (CS2000). This was the first integrated survey of soil biota and chemical properties at a national scale. A total of 1052 soil samples were collected across Great Britain during CS2000 and analysed for a range of soil microbial and invertebrate characteristics resulting in the production of a series of robust datasets. A principal objective was to use these datasets to investigate relationships between soil biota and environmental factors such as geographical location, vegetation, land use, land cover, soil type and pollutant levels as first stages in characterising the inherent biodiversity of British soils and investigating the potential of soil biodiversity as indicators of soil health at a regional or national scale. Preliminary results for culturable heterotrophic, invertebrate taxa, Acari, Collembola and Oribatid mites are presented here to illustrate the nature of the data collected and the patterns of soil biodiversity in relation to large-scale regional, vegetation and soil characteristics across the British countryside.     

Analysis of the exterior colour of agroindustrial buildings: a computer aided approach to landscape integration

The visual and aesthetic aspects of any object are defined by its colour, form, line and texture, to which might be added compositional reference elements such as scale and, in the case of three dimensional scenes, spatial character. This paper investigates one of these colour and proposes a method for predicting the value of a building's integration into the landscape. Based on psychological aspects, the method uses computers to analyse and measure the pertinent attributes. The designer can analyse visual elements in terms of the properties that define them. For example, colour, the subject of this paper, is defined by its hue, saturation and lightness. Tables are proposed to study the relationship between buildings and their background using computers. This paper offers a tool, based on the digital examination of scenes and on people's integration preferences with respect to agroindustrial buildings, which it is hoped will help project designers select appropriate colour schemes.     

Combination of magnetic parameters: an efficient way to discriminate soil-contamination sources (south France)

Biplots combining magnetic parameters allow to identification and differentiation different pollutant emission sources. A major problem in soil pollution is the characterization of the relative contributions of different anthropogenic particles sources. This paper demonstrates the efficiency of magnetic techniques to provide identification and differentiation of contaminating emission sources. About 100 soil samples were collected across a mixed agricultural and industrial area (Crau plain/Berre-Fos basin) in southern France. Nine soil profiles were realized. They are aligned along a transect, from the Mediterranean cost to the north. Measurements of initial magnetic susceptibility (chi) and remanent magnetization (ARM, IRM) have been carried out at room temperature. Several ratios of magnetic parameters were calculated and tested. Bivariate analyses allow to characterize different pollution sources and graphic results suggest three dominant contributions originated from road traffic, airport and steel industry. Moreover, magnetic grain-size discrimination between surface-soil samples and bottom-soil samples is obtained. An increase of hard magnetic components from topsoil towards the bottom of the profiles is evidenced.     

These studies were conducted to assess the effects of lead toxicity on exploratory behavior and running. Effects of lead on exploratory behavior and running speed in the shrew, Blarina brevicauda (Insectivora)

These studies were conducted to assess the effects of lead toxicity on exploratory behavior and running speed in the short-tailed shrew, Blarina brevicauda. Shrews from the experimental group received 25 mg/kg/day of lead acetate in their drinking water for a period of 90 days. Control subjects received sodium acetate. Exploratory behavior was determined using a computerized activity chamber where movements of test subjects broke infrared beams projected onto the floor of the apparatus. Time spent (sec) in exploration was recorded over eight 6-min intervals. Running speed (km/hr) was measured in a microprocessor-controlled rectangular racetrack fitted with photocell timers. With respect to time spent in exploration, there were significant differences between lead-exposed (20.5-23.9 sec per 6-min testing session) and control subjects (6.8-8.1 sec) after the sixth testing interval in the activity chamber. With respect to maximal running speed, control subjects ran significantly faster (mean: 14.8 km/hr) than their lead-exposed counterparts (5.83 km/hr). Lead-exposed animals exhibited hyperactivity and increased random locomotor movements. They would frequently bump into the walls and their movements were more random. Controls typically ran along the racetrack in a straight line. These results represent the first data for the effects of lead exposure on exploratory behavior and running speed for shrews.