Soil metal concentrations and productivity of Betula populifolia (gray birch) as measured by field spectrometry and incremental annual growth in an abandoned urban Brownfield in New Jersey

A forested brownfield within Liberty State Park, Jersey City, New Jersey, USA, has soils with arsenic, chromium, lead, zinc and vanadium at concentrations above those considered ambient for the area. Using both satellite imagery and field spectral measurements, this study examines plant productivity at the assemblage and individual specimen level. Longer term growth trends (basal area increase in tree cores) were also studied. Leaf chlorophyll content within the hardwood assemblage showed a threshold model for metal tolerance, decreasing significantly beyond a soil total metal load (TML) of 3.0. Biomass production (calculated with RG - Red/Green Ratio Index) in Betula populifolia (gray birch), the co-dominant tree species, had an inverse relationship with the Zn concentration in leaf tissue during the growing season. Growth of B. populifolia exhibited a significant relationship with TML. Assemblage level NDVI and individual tree NDVI also had significant decreases with increasing TML. Ecosystem function measured as plant production is impaired at a critical soil metal load.     

In situ fixation of metals in soils using bauxite residue: chemical assessment

Contamination of soils with heavy metals and metalloids is a widespread problem all over the world. Low cost, non-invasive, in situ technologies are required for remediation processes. We investigated the efficiency of a bauxite residue (red mud) to fix heavy metals in two soils, one contaminated by industrial activities (French soil), and one by sewage sludge applications (UK soil). This Fe-oxide rich material was compared with lime, or beringite, a modified aluminosilicate that has been used for in situ fixation processes. Four different crop species were successively grown in pots. Metal concentrations in the soil pore waters were analyzed during the growing cycles. At the end of the experiment fluxes of heavy metals were measured using a diffusive gradient in thin film technique (DGT). Furthermore, a sequential extraction procedure (SEP) and an acidification test were performed to investigate the mechanisms of metal fixation by different soil amendments. In both soils, the concentrations of metals in the soil pore water and metal fluxes were greatly decreased by the amendments. An application of 2% red mud performed as well as beringite applied at 5%. Increasing soil pH was a common mechanism of action for all the amendments. However, the red mud amendment shifted metals from the exchangeable to the Fe-oxide fraction, and decreased acid extractability of metals. The results suggest that specific chemisorption, and possibly metal diffusion into oxide particles could also be the mechanisms responsible for the fixation of metals by red mud.     

Volatilisation of crop protection chemicals from crop and soil surfaces under controlled conditions--prediction of volatile losses from physico-chemical properties

Volatilisation of crop protection chemicals from soil and crop surfaces is one of a number of processes that may contribute to their dissipation in the environment. Therefore, information on the potential of a chemical to volatilise from these surfaces is required by international and national registration authorities. This paper reports the results of more than 190 experiments, which were carried out with 80 different crop protection chemicals under controlled conditions (laboratory and/or greenhouse) according to the BBA guideline. Percent loss values observed during 24 h after application are reported for 123 soil and 71 crop volatility studies. Generally, volatile losses from crop surfaces were found to be greater than from soil surfaces under comparable experimental conditions. It has been previously proposed that volatile losses from soil surfaces, from crops, and from aqueous systems can be estimated from physico-chemical parameters. The data are therefore analysed to determine whether a correlation exists between volatilisation and physico-chemical parameters, such as vapour pressure, Henry's law constant, water/air and soil/air distribution coefficients. It was found that these parameters can be used to make reasonable predictions of volatile losses from crop and soil surfaces, which can be expected for crop protection chemicals under controlled conditions. Vapour pressure was the best predictor of losses from soil and crops. The use of the soil/air distribution coefficient is an alternative for predicting/estimating the volatility potential of a chemical from soil. Based on direct measurements, no noticeable volatility can be expected from compounds with a vapour pressure below 10(-3) Pa from soil and 10(-4) Pa from crops, this is fully confirmed by indirect measurements. A tiered volatility testing scheme including appropriate trigger values is proposed.     

In situ fixation of metals in soils using bauxite residue: biological effects

Soils polluted with heavy metals can cause phytotoxicity and exhibit impared microbial activities. In this paper we evaluate the responses of different biological endpoints to in situ remediation processes. Three soil amendments (red mud, beringite and lime) were applied to two soils polluted by heavy metals. Oilseed rape, wheat, pea and lettuce were grown successively in pots on the untreated and amended soils and their yield and metal uptake were determined. A suite of microbial tests (lux-marked biosensors, Biolog and soil microbial biomass) were performed to determine the effect of the soil amendments on the functionality and size of the soil microbial community. In both soils all three amendments reduced phytotoxicity of heavy metals, enhanced plant yields and decreased the metal concentrations in plants. The red mud treatment also increased soil microbial biomass significantly. The microbial biosensors responded positively to the remediation treatments in the industrially-contaminated soil used in the experiment. Red mud applied at 2% of soil weight was as effective as beringite applied at 5%. The results also showed that since the biological systems tested respond differently to the alleviation of metal toxicity, a suite of biological assays should be used to assess soil remediation processes.     

Determination of 129I/127I in aerosol samples in Seville (Spain)

In this work we present results of the (129)I/(127)I ratio in aerosols of Seville, Southwest of Spain (37.4 degrees N,6 degrees W). A radiochemical method is applied to extract the iodine from the aerosols and prepare samples to be measured by accelerator mass spectrometry (AMS) at the ETH facility in Zürich. We have found the possibility of monitoring the (129)I/(127)I isotopic ratio on a two-days basis with sensitivities in the order of 10(4)-10(5) atoms (129)I/m(3), and values of 10(-8)-10(-9) for the isotopic ratio.     

Visualisation of natural aquatic colloids and particles -- a comparison of conventional high vacuum and environmental scanning electron microscopy

The applicability of environmental scanning electron microscopy (ESEM; imaging of hydrated samples) and conventional high vacuum scanning electron microscopy (SEM; imaging of dried samples at high vacuum) for the observation of natural aquatic colloids and particles was explored and compared. Specific attention was given to the advantages and limitations of these two techniques when used to assess the sizes and morphologies of complex and heterogeneous environmental systems. The observation of specimens using SEM involved drying and coating, whereas ESEM permitted their examination in hydrated form without prior sample preparation or conductive coating. The two techniques provided significantly different micrographs of the same sample. SEM provided sharper images, lower resolution limits (10 nm or lower), but more densely packed particles, suggesting aggregation, and different morphological features than ESEM, suggesting artefacts due to drying. ESEM produced less easily visualised materials, more complex interpretation, slightly higher resolution limits (30-50 nm), but these limitations were more than compensated for by the fact that ESEM samples retained, at least to some extent, their morphological integrity. The results in this paper show that SEM and ESEM should be regarded as complementary techniques for the study of aquatic colloids and particles and that ESEM should be more widely applied to aquatic environmental systems than hitherto.     

Surface metal adsorption on zooplankton carapaces: implications for exposure and effects in consumer organisms

The current study aimed to determine the potential of two important aquatic invertebrate crustacean species, Daphnia magna and Ceriodaphnia dubia, to adsorb cadmium on to their carapaces from aqueous solution. Using the Langmuir equation to model data outputs, it was shown that cadmium readily became associated with the carapace surfaces of both species, with uptake being dependent on exposure time and concentration. Maximum carapace-adsorption potential was found to be directly related to surface area, so that at predicted carapace saturation, D. magna neonates bound approximately five times more cadmium than the smaller C. dubia neonates. However, adsorption per unit surface area was found to be similar under the same exposure conditions. Results of surface metal adsorption studies in C. dubia suggested that short term exposures to high concentrations of aqueous cadmium would lead to similar levels of adsorption as obtained with long-term exposures to low concentrations. The study illustrates that contaminants adsorbed to prey surfaces may be an important mechanism of exposure to predators, and highlights some potential problems of feeding organisms during long-term toxicity tests.     

海珠：打掉7家地下洗水厂

3月12日上午，海珠区环保局组成近百人的联合执法队，兵分两路，对赤沙涌沿岸违法经营印染、漂染、洗水的企业实行专项打击，当场查处了“永兴洗水厂”、“广隆洗水厂”等7家地下洗水企业。这次被查处的7家洗水企业均未办理工商注册、没有通过环保审批，更没有污染治理设施，生产废水未经处理就直接排放，严重污染水环境。针对其环境违法行为，环保部门在查实其环境违法事实后，当场作出立案查处决定，并向其发出《行政处罚听证告知书》和《责令停止生产通知书》。     

Formate species in the low-temperature oxidation of dimethyl ether

The oxidation of dimethyl ether (DME, 340 ppm in 10% O2) has been studied experimentally in an atmospheric pressure laminar flow reactor in the temperature range from 240 degrees C to 700 degrees C for residence times in the range 2-4 s. The influence of nitric oxide additions up to 620 ppm to the feed gases has also been investigated. Products of reaction were determined by FTIR. In the absence of NO, reaction is first detected at about 260 degrees C. The products in the low-temperature region include formaldehyde (HCHO), and formic acid (HCOOH). The addition of NO leads to the appearance of methyl formate (CH3OCHO). While the overall behaviour of the system can be explained qualitatively in terms of typical low-temperature hydrocarbon ignition, recently published chemical kinetic models for DME ignition do not allow for the formation of these formate species. We find no experimental evidence for the formation of hydroperoxymethyl formate (HPMF, HOOCH2OCHO) which is predicted by the models to be a significant stable intermediate at temperatures below 350 degrees C. Since both formic acid and methyl formate have potentially harmful health effects, these observations may have significant implications for use of DME as a diesel fuel.