强化混凝去除黄浦江水有机物的试验研究

强化混凝去除有机物的效果与水源的分子量分布特性有着密切的关系.由于黄浦江水中低分子量的溶解性有机物占多数,因此,强化混凝处理有机物效果有限.对于＜1k分子量区间的有机物.增加混凝剂投量可有效去除紫外吸光值(UV254),但去除溶解性有机碳(DOC)的效果很差.尽管增加混凝剂投量和降低pH都能有效地去除有机物,但决定强化混凝效果的主要因素是pH,去除黄浦江水有机物的最佳pH范围为6～5.     

沈阳市大气污染防治对策

本文根据沈阳市的大气污染现状，分析了大气污染形成的原因和特点及影响大气环境质量的主要因素，确定了大气环境质量目标。并提出了近期和２０００年的大气污染防治对策．     

Effectiveness evaluation of water-sprinkling in controlling urban fugitive road dust based on TRAKER method: A case study in Baoding, China

Fugitive road dust (FRD) contributes a great deal to urban rainwater and air pollution and is commonly controlled by water-sprinkling in most Chinese cities. However, there is a lack of information on its effectiveness. We used the Testing Re-entrained Aerosol Kinetic Emissions from Roads (TRAKER) method to monitor different types of roads in Baoding city before and within 1 hr after water-sprinkling and obtained the road dirtiness index (a) and PM concentration in the road environment ($T_{\mathrm{T}}^{*}$), to evaluate the removal efficiency for PM deposited on the road surface (${\eta }_a$) and the reduction efficiency for the PM concentration in the road environment (${\eta }_{\text{PM}}$). The results give that the ${\eta }_a$ for three types of roads is ranked: branch road (87%-–100%) > major arterial road (80%-83%) > minor arterial road (68%-77%), and the ${\eta }_{\text{PM}}$ ranked: minor arterial road (70%) > branch road (46%-58%) > major arterial road (37%-53%). The ${\eta }_a$ and ${\eta }_{\text{PM}}$ varied non-linearly with time and presented a quadratic curve. The average effective control time (${\eta }_{\mathit{a}}$> 0) was 62 min on the major and minor arterial roads, and much longer than 1 hr on branch roads. The ${\eta }_{\text{PM}}$ values diminished completely by 72 min on average from the end of sprinkling for the three types of roads. Water-sprinkling can remove PM₁₀ particles from the road surface and reduce their concentration in the road environment more thoroughly than PM_2.5. Our findings could be helpful for controlling urban FRD emissions more efficiently and precisely.     

预处理的铜绿假单胞菌对Cu2+的生物吸附研究

从电镀废水污泥中分离，纯化获一高抗铜菌株，经鉴定为铜绿假单胞菌（Pseudomonas aeruginosa)，采用不同浓度盐酸对铜绿假单胞菌进行预处理，同时考察了不同因素如溶液的pH，温度，摇床转速，接触反应时间对未处理菌和预处理的影响，结果表明，经0．1NHCl预处理的菌体具有最佳吸附效果，pH、摇床转速对菌体的吸附具有较显著影响，温度对菌体吸附影响不大。     

研究单位压边力值对板料成形性能的影响

主要介绍板料在拉深成形过程中单位压边力值对板料成形性能的影响。研究方法采用仿真技术 ,指出板料在成形过程中如按最初设定的单位压边力值进行成形 ,那么 ,板料成形过程中单位压边力值将逐渐增大 ,严重影响板料成形极限。如果采用控制板料在成形过程中压边圈下坯料的单位压边力值 ,将提高板料成形极限。其结论为生产现场提高板料成形性能和表面质量提供了一种可实施的方法。     

深圳:向"雨洪"要水

“到2020年，深圳本地水资源可供水量占总供水量的比重将由目前的27％提高到45％，新增雨洪资源利用量达4．9亿立方米。”这是不久前通过专家鉴定的《深圳雨洪资源利用规划研究》（以下简称规划）提出的目标。     

Decomplexation of Cu-1-hydroxyethylidene-1,1-diphosphonic acid by a three-dimensional electrolysis system with activated biochar as particle electrodes

The feasibility of decomplexation removal of typical contaminants in electroplating wastewater, complexed Cu(II) with 1-hydroxyethylidene-1,1-diphosphonic acid (Cu-HEDP), was first performed by a three-dimensional electric reactor with activated biochar as particle electrodes. For the case of 50 mg/L Cu-HEDP, Cu(II) removal (90.7%) and PO initial pH 7, acid-treated almond shell biochar (AASB) addition 20 g/L, and reaction time 180 min, with second-order rate constants of 1.10 × 10⁻³ and 1.94 × 10⁻⁵ min⁻¹respectively. The growing chelating effect between Cu(II) and HEDP and the comprehensive actions of adsorptive accumulation, direct and indirect oxidation given by particle electrodes accounted for the enhanced removal of Cu-HEDP, even though the mineralization of HEDP was mainly dependent on anode oxidation. The performance attenuation of AASB particle electrodes was ascribed to the excessive consumption of oxygen-containing functionalities during the reaction, especially acidic carboxylic groups and quinones on particle electrodes, which decreased from 446.74 to 291.48 µmol/g, and 377.55 to 247.71 µmol/g, respectively. Based on the determination of adsorption behavior and indirect electrochemical oxidation mediated by in situ electrogenerated H₂O₂ and reactive oxygen species (e.g., •OH), a possible removal mechanism of Cu-HEDP by three-dimensional electrolysis was further proposed.     

高锰酸盐指数测定中校正系数K值的变化验证

运用数理统计方法,验证了高锰酸盐指数测定的校正系数K值在4～5h内不会随时间和水样的变化而变化,K值不必每个样品都测定。     

基于行业全产业链评估一份外卖订单的环境影响

构建"生产-运输-使用-废弃处置"的外卖全产业链，通过大样本企业调研与外卖平台大数据分析，计算8个样本城市不同材质与规格的外卖餐盒、餐具、包装袋的市场使用比例，挖掘骑手配送的海量数据，收集城市垃圾处理处置情况，系统评估外卖全过程的环境影响.结果表明，外卖包装物全产业链中生产环节（45%）与废弃处置环节（50%）为环境影响的主要来源，严重程度依次为固废排放、水污染、资源能源消耗和大气污染.所在城市及选用包装物材质的不同，外卖行业造成的环境影响会有显著区别，全产业链上的各环节需相互配合，多主体共同承担环境责任，采取差别化的减缓应对措施.     

某装置海洋环境下腐蚀失效分析及控制措施研究

目的 解决采用ZL205A制造的某装置在海洋环境下的腐蚀失效问题.方法 分析装置所处的海洋浪花飞溅区的使用环境,对腐蚀原因与机理进行深入查找、研究.针对腐蚀原因,制定针对性的腐蚀控制措施,并通过试验予以验证.结果 装置腐蚀失效的主要原因为在海洋高盐、高湿的使用环境下,防腐蚀设计不足,防腐措施不到位,产生了电偶腐蚀、缝隙腐蚀、点蚀、晶间腐蚀、应力腐蚀等.制定的腐蚀控制措施主要有更换耐腐蚀性能较好的ZL114A材料、采用异种金属隔离、完善结构设计与加强过程控制、加强表面涂覆和维护保养等4方面.验证试验表明,采用综合防护措施的ZL114A试样腐蚀轻微,防腐效果良好,而采用原技术状态的ZL205A试样,腐蚀严重,防腐效果差.结论 采取综合防护措施的ZL114A装置在海洋环境下的耐腐蚀性显著提高,实际使用效果良好.