农田土壤温室气体产生机制及影响因素研究进展

农田土壤通过微生物呼吸、植物根系呼吸和土壤动物呼吸,释放大量温室气体,成为大气中主要温室气体(CO2、CH4和N2O)的重要来源.文章在阐述土壤温室气体产生机制的基础上,着重从土壤生物、土壤理化性质(主要包括温湿度、有机质、pH、Eh、土壤质地等)、水肥管理及耕作措施等角度对农田土壤温室气体释放的影响进行了综述,对土壤温室气体的减排措施进行了总结,并就今后农田土壤温室气体的研究重点和方向进行了展望.     

施肥对稻田甲烷与氧化亚氮排放的影响

大气温室气体浓度的升高引起太阳辐射加强,导致全球变暖已成为不争的事实。农田是温室气体排放的重要来源之一,采用静态箱-气相色谱法探讨不同氮肥类型与施氮水平对华南稻田甲烷（CH4）与氧化亚氮（N2O）排放的影响。试验共设置5个处理,每处理3次重复,分别（以N计）为U6（90 kg·hm-2）,U10（150 kg·hm-2）,U12（180 kg·hm-2）,SR10（150 kg·hm-2,缓释肥）,CR10（150 kg·hm-2,控释肥）。各处理磷钾肥用量一致,分别为45 kg·hm-2（以P2O5计）和127.5 kg·hm-2（以K2O计）。研究结果表明：稻田CH4与N2O排放量随氮肥用量的增加呈增加趋势。晚稻CH4排放呈单峰型,其峰值出现在水稻移栽后16~23 d,N2O排放并未出现明显的排放峰。CH4累积排放主要发生在返青-分蘖初期和分蘖盛期-幼穗分化期两个时段,而N2O的累积排放主要集中在灌浆-成熟期（U6处理除外）。不同氮肥类型处理CH4季节排放总量与平均排放量表现为：处理SR10〉处理U10〉处理CR10,其中,控释肥处理甲烷排放总量较常规尿素处理减少了11.3%;而N2O季节排放总量与平均排放量表现为：处理CR10〉处理U10〉处理SR10。综上,初步认为氮肥的施用能够促进CH4与N2O的释放,缓释肥处理能有效减少稻田N2O的排放,而控释尿素处理能明显降低稻田CH4气体的排放,且稻田CH4与N2O的排放存在一定的互为消长关系,因此如何平衡稻田甲烷与氧化亚氮释放,使稻田增温潜势最小化是下一步研究的重点和方向。     

橡胶种植对纳板河流域热带雨林生态系统的影响

通过实地调查数据对云南纵向岭谷区纳板河自然保护区热带雨林生态系统(包括不同海拔高度的3个样地),不同种植年限的人工橡胶林(分别为种植8 a、种植20 a和种植30 a的3个样地)及1个次生林样地,植被和土壤的比较研究,定量分析了橡胶种植对热带雨林生态系统的影响.研究结果表明,①热带雨林随海拔高度的下降,生物量和土壤养分含量均呈增加趋势;中海拔热带雨林物种丰富度最高,群落层次丰富.②热带雨林开采为橡胶林之后,群落层次结构简单化,物种多样性明显下降,地上生物量下降,土壤养分状况变劣,次生林介于二者之间.研究结果可以为该地区土地的持续利用与生物多样性保护提供依据.     

办公室地面灰尘中PAHs污染的时间变化规律及人体健康风险

为探究室内地面灰尘中15种多环芳烃(PAHs)污染的时间变化规律,于2012年3—7月对北京市一座办公楼内的某办公室进行了每周一次的连续高密度灰尘样品采集。利用高效液相色谱-荧光检测器检测15种PAHs含量。结果表明,该办公室内灰尘样品中∑PAHs浓度范围为1 180~24 300 ng·g~(-1),平均浓度为8 960 ng·g~(-1)。总体上,检出的PAHs以3环PAHs为主,其中菲占PAHs总量的59%以上,其次是4环和5环PAHs,4环PAHs中占的比重最高,约占4环PAHs总量的34%。该办公室内灰尘中∑PAHs的浓度存在显著的时间变化差异,总体表现为∑PAHs浓度随气温升高而降低的趋势。源解析结果显示,机动车排放源、石油源、木材与煤燃烧是北京市室内灰尘中PAHs的主要来源。健康风险评估结果显示,ILCR皮肤接触ILCR手口摄入,且CR均值大于10-6,说明该采样点的PAHs污染存在"潜在致癌风险"。     

典型电子垃圾拆解区大气中多溴联苯醚（PBDEs）的季节变化特征

电子垃圾污染问题已经引起了人们的广泛关注。研究了一典型电子垃圾拆解区及其上下风向大气中PBDEs的季节变化特征。结果表明,夏季电子垃圾拆解区大气中∑17BDEs总浓度为9930pg·m-3,冬季∑20BDEs的总浓度高达41476pg·m-3;和夏季相比,冬季五溴-联苯醚的百分比降低了16.7%,而十溴-联苯醚升高了10.2%,但是,其组成仍然是五溴-联苯醚为主,十溴-联苯醚次之,八溴-联苯醚最少。上下风向地区大气中PBDEs浓度及其组成成分由于受到电子垃圾拆解、本地生产方式和季节变化的影响也表现出相应的变化形式。     

华南滨海小流域降雨入渗对地下水的补给分析

以华南滨海小流域——中山大学滨海水循环试验基地(试验基地)作为研究区,在对该流域地下水和雨水分别进行采样、实验分析的基础上,利用氯量平衡法(CMB)与地下水动态法计算了该流域的降雨入渗补给系数与给水度。研究发现,试验基地地下水主要受降雨补给,地下水埋深在雨季(4—9月)、旱季(10—3月)的变动范围大致为0～1.5 m与0～0.5 m。根据CMB计算结果,补给区、中间区雨季降雨入渗补给系数分别为旱季的1.3～1.6倍和1.3～2.0倍,且补给区大于中间区(M5井除外)。利用地下水动态法计算次降雨入渗补给系数,所得雨季、旱季的均值(7.6%和4.6%)与CMB计算结果(7.7%和5.3%)较为接近。给水度、雨强与入渗补给系数均存在一定的线性关系。将地下水埋深分别与降雨入渗补给量及潜水蒸发量进行多项式拟合对比,发现降雨入渗对地下水的最大入渗补给埋深约为2.3 m,当埋深为3.1 m时,地下水可获得最大净补给量。     

三维电极电化学反应器组合Fenton试剂深度处理焦化废水

采用三维电极电化学反应器组合Fenton试剂法对经过二级生化处理后的焦化废水进行深度处理。在三维电极参数一定的条件下,考察了影nfi]TOC去除率的影响因素,探讨了该反应体系的降解动力学及降解机理。正交试验结果表明,反应体系中各参数的最佳值分别为p（H202投加量）=300mg·L-1,pH3．4,反应时间为90min,c（FeS04-7H20投加量）为3．5mmol·L-1,TOC去除率可达到61．7％。焦化废水的降解反应表现为一级动力学。紫外吸收光谱分析结果,废水中有机物彻底发生了降解矿化,这为三维电极组合Fenton试剂工艺在焦化废水深度处理中的工程应用提供了一定的理论指导。     

Occurrence and migration of microplastics and plasticizers in different wastewater and sludge treatment units in municipal wastewater treatment plant

● Reduce the quantifying MPs time by using Nile red staining. ● The removal rate of MPs and PAEs in wastewater and sludge were investigated. ● MPs and PAEs were firstly analyzed during thermal hydrolysis treatment. ● The removal of PAEs from wastewater and sludge was mainly biodegradation. Microplastics (MPs) and plasticizers, such as phthalate esters (PAEs), were frequently detected in municipal wastewater treatment plants (MWTP). Previous research mainly studied the removal of MPs and PAEs in wastewater. However, the occurrence of MPs and PAEs in the sludge was generally ignored. To comprehensively investigate the occurrence and the migration behaviors of MPs and PAEs in MWTP, a series of representative parameters including the number, size, color, shape of MPs, and the concentrations of PAEs in wastewater and sludge were systematically investigated. In this study, the concentrations of MPs in the influent and effluent were 15.46±0.37 and 0.30±0.14 particles/L. The MP removal efficiency of 98.1% was achieved and about 73.8% of MPs were accumulated in the sludge in the MWTP. The numbers of MPs in the sludge before and after digestion were 4.40±0.14 and 0.31±0.01 particles/g (dry sludge), respectively. Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that the main types of MPs were polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS). Six PAEs, including phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), ortho dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), and bis(2-ethyl) hexyl phthalate (DEHP), were detected in the MWTP. The concentrations of total PAEs (ΣPAEs) in the influent and effluent were 76.66 and 6.28 µg/L, respectively. The concentrations of ΣPAEs in the sludge before and after digestion were 152.64 and 31.70 µg/g, respectively. In the process of thermal hydrolysis, the number and size of MPs decreased accompanied by the increase of the plasticizer concentration.     

TiO2@palygorskite composite for the efficient remediation of oil spills via a dispersion-photodegradation synergy

• A novel and multi-functional clay-based oil spill remediation system was constructed. • TiO₂@PAL functions as a particulate dispersant to break oil slick into tiny droplets. • Effective dispersion leads to the direct contact of TiO₂ with oil pollutes directly. • TiO₂ loaded on PAL exhibits efficient photodegradation for oil pollutants. • TiO₂@PAL shows a typical dispersion-photocatalysis synergistic remediation. Removing spilled oil from the water surface is critically important given that oil spill accidents are a common occurrence. In this study, TiO₂@Palygorskite composite prepared by a simple coprecipitation method was used for oil spill remediation via a dispersion-photodegradation synergy. Diesel could be efficiently dispersed into small oil droplets by TiO₂@Palygorskite. These dispersed droplets had an average diameter of 20–30 mm and exhibited good time stability. The tight adsorption of TiO₂@Palygorskite on the surface of the droplets was observed in fluorescence and SEM images. As a particulate dispersant, the direct contact of TiO₂@Palygorskite with oil pollutants effectively enhanced the photodegradation efficiency of TiO₂ for oil. During the photodegradation process, •O₂⁻and •OH were detected by ESR and radical trapping experiments. The photodegradation efficiency of diesel by TiO₂@Palygorskite was enhanced by about 5 times compared with pure TiO₂ under simulated sunlight irradiation. The establishment of this new dispersion-photodegradation synergistic remediation system provides a new direction for the development of marine oil spill remediation.     

烟气脱硫过程锰催化氧化亚硫酸钙的研究

利用直径280 mm、高320 mm的间歇式搅拌槽,在MnSO4加入浓度为0～0.05 mol/L的情况下,对亚硫酸钙悬浮液进行了催化氧化实验研究.实验结果表明,锰离子的加入会改变亚硫酸钙的氧化机理及氧化过程,表现为终点氧化率和氧化速率的变化.当Mn2 浓度为0.05 mol/L时,亚硫酸钙的终点氧化率比未加入Mn2 时高30%;此外,与非催化反应过程相比,Mn2 的加入能使亚硫酸钙在一个更宽的浓度范围内(0.02～0.073 mol/L)和一个更宽的时间范围内(20～100 min)均保持较高的氧化速率水平.