Development of a multi-criteria index ranking system for urban runoff best management practices (BMPs) selection

Low impact development best management practices (LID-BMPs) are considered to be cost-effective measures for mitigating the water quantity and quality impact of urban runoff. Currently, there are many types of LID-BMPs, and each type has its own intrinsic technical and/or economical characteristics and limitations for implementation. The selection of the most appropriate BMP type(s) for a specific installation site is therefore a very important planning step. In the present study, a multi-criteria selection index system (MCIS) for LID-BMP planning was developed. The selection indexes include 12 first-level indices and 26 second-level indices which reflect the specific installation site characteristics pertaining to site suitability, runoff control performance, and economics of implementation. A mechanism for ranking the BMPs was devised. First, each individual second-level index was assigned a numeric value that was based on site characteristics and information on LID-BMPs. The quantified indices were normalized and then integrated to obtain the score for each of the first-level index. The final evaluation scores of each LID-BMP were then calculated based on the scores for the first-level indices. Finally, the appropriate BMP types for a specific installation site were determined according to the rank of the final evaluation scores. In order to facilitate the application of the MCIS BMP ranking system, the computational process has been coded into a software program, BMPSELEC. A case study demonstrating the MCIS methodology, using an LID-BMP implementation planning at a college campus in Foshan, Guangdong Province, is presented.     

珠三角地区造纸行业排水中二 NFDA1 英(PCDD/Fs)特征分析

研究采用¹³C同位素内标稀释定量法,高分辨气相色谱质谱法(HRGC-HRMS)对珠三角地区造纸行业排水中PCDD/Fs特征进行了分析。结果表明,该地区造纸行业PCDD/Fs含量为:4.75~80.05 pg/L,且以OCDD占主导地位;同时该类行业PCDD/Fs的TEQ为:0.21~2.02 pg TEQ/L。最后通过对该类行业排水中PCDD/Fs的TEQ年排放量进行讨论,其结果为0.30~12.97 mg TEQ,且年平均排放量(4.42 mgTEQ)只占我国造纸行业TEQ总排放量的很小一部分。     

电解铝企业阳极残渣、阳极残极浸出毒性鉴别及管理建议

对电解铝企业产生的阳极残渣、阳极残极浸出毒性进行了鉴别。鉴别结果表明：电解铝企业产生阳极残渣浸出液中氟化物（不含氟化钙）平均质量浓度为140 mg／L,最高达244 mg／L,且超标试样数达到《危险废物鉴别标准浸出毒性鉴别》中相应规定,鉴别该废物属于危险废物,应按照危险废物进行管理;阳极残极浸出液中氟化物（不含氟化钙）平均质量浓度为74 mg／L,无超标试样数,该废物不属于具有氟化物浸出毒性的固体废物,建议仍按一般固体废物进行管理。     

CMT监测井在黑河流域地下水监测中的应用

以CMT监测井在黑河流域的应用为基础,通过对监测数据和采集的水样进行分析,了解了黑河流域地下水水位动态变化,掌握了黑河流域地下水水化学垂向分布规律,为合理利用黑河流域水资源提供了科学依据。     

上海市臭氧污染时空分布及影响因素

分析2006—2016年上海市的监测数据发现,臭氧(O_3)浓度存在逐年上升趋势,污染持续时间有所增加,但除水平风速有下降趋势外,其他相关气象因素的年际变化趋势并不显著。空间分析结果表明,上海市O_3超标主要集中在西南部郊区,但市区O_3超标潜势不容忽视。O_3污染高发季节的污染玫瑰图分析发现,上海市南部地区是影响上海市O_3污染的关键区域;对于NO_2减排的影响分析发现,尽管上海市O_3平均浓度总体处于上升趋势,但在NO_2下降幅度最为明显的内环市区和北部郊区,O_3上升幅度低于NO_2下降幅度较小的内外环区域和西部郊区,表明上海市的O_3污染控制仍需持续推进NOx的减排,并同步推进VOCs的减排。     

南水北调中线陕西水源区污染源排放时空变化特征

基于2008—2012年污染源环境统计数据,采用Spearman秩相关系数法等分析南水北调中线陕西水源区污废水及污染物年排放总量变化趋势,借助ArcGIS空间分析功能表征水源区污染源排放的空间分布特征。结果表明:2008—2012年水源区污废水和NH_3-N年排放总量呈显著上升趋势,COD、As、Pb、Cd、Cr和Hg年排放总量呈抛物线型变化,总体上COD、Pb、Cd年排放总量增加,As、Cr和Hg年排放总量降低。水源区污废水及污染物排放量空间差异明显,污废水、COD和NH_3-N排放涉及流域所有区县,其排放量从干流到流域边缘呈现较明显的梯度变化,即位于流域中心或地级市行政中心的区县排放量明显高于位于流域边缘的区县;As、Pb、Cd、Cr和Hg排放量呈现明显的区域分布,主要分布在勉县等8个区县。     

泰州市冬季空气质量变化特征

为了解泰州市冬季空气质量变化特征,于2013年12月27日—2014年1月7日对NO2,SO2,O3,CO,PM10和PM2.5进行了监测,结合地面气象资料和HYSPLIT轨迹模式分析了污染物的来源与传输过程。结果表明,观测期间AQI优良率仅为25%,PM10和PM2.5日均值超标率分别为58.3%,75.0%;有机碳是泰州市ρ(PM2.5)中最高的化学组分,其次是富钾和元素碳。PM2.5主要来源为汽车尾气、工业源、燃煤,分别占来源比例21.76%,16.52%,15.54%。局地污染源和不利气象条件是造成大气污染的主要原因。