Black Carbon and Polycyclic Aromatic Hydrocarbon Emissions from Vehicles in the United States–Mexico Border Region: Pilot Study

The investigators developed a system to measure black carbon (BC) and particle-bound polycyclic aromatic hydrocarbon (PAH) emission factors during roadside sampling in four cities along the United States–Mexico border, Calexico/Mexicali and El Paso/Juárez. The measurement system included a photoacoustic analyzer for BC, a photoelectric aerosol sensor for particle-bound PAHs, and a carbon dioxide (CO₂) analyzer. When a vehicle with measurable emissions passed the system probe, corresponding BC, PAH, and CO₂ peaks were evident, and a fuel-based emission factor was estimated. A picture of each vehicle was also recorded with a digital camera. The advantage of this system, compared with other roadside methods, is the direct measurement of particulate matter components and limited interference from roadside dust. The study revealed some interesting trends: Mexican buses and all medium-duty trucks were more frequently identified as high emitters of BC and PAH than heavy-duty trucks or passenger vehicles. In addition, because of the high daily mileage of buses, they are good candidates for additional study. Mexican trucks and buses had higher average emission factors compared with U.S. trucks and buses, but the differences were not statistically significant. Few passenger vehicles had measurable BC and PAH emissions, although the highest emission factor came from an older model passenger vehicle licensed in Baja California.     

TIC-Tox: A preliminary discussion on identifying the forcing agents of DBP-mediated toxicity of disinfected water

The disinfection of drinking water is a major public health achievement; however, an unintended consequence of disinfection is the generation of disinfection by-products (DBPs). Many of the identified DBPs exhibit in vitro and in vivo toxicity, generate a diversity of adverse biological effects, and may be hazards to the public health and the environment. Only a few DBPs are regulated by several national and international agencies and it is not clear if these regulated DBPs are the forcing agents that drive the observed toxicity and their associated health effects. In this study, we combine analytical chemical and biological data to resolve the forcing agents associated with mammalian cell cytotoxicity of drinking water samples from three cities. These data suggest that the trihalomethanes (THMs) and haloacetic acids may be a small component of the overall cytotoxicity of the organic material isolated from disinfected drinking water. Chemical classes of nitrogen-containing DBPs, such as the haloacetonitriles and haloacetamides, appear to be the major forcing agents of toxicity in these samples. These findings may have important implications for the design of epidemiological studies that primarily rely on the levels of THMs to define DBP exposure among populations. The TIC-Tox approach constitutes a beginning step in the process of identifying the forcing agents of toxicity in disinfected water.     

The impact of iodinated X-ray contrast agents on formation and toxicity of disinfection by-products in drinking water

The presence of iodinated X-ray contrast media (ICM) in source waters is of high concern to public health because of their potential to generate highly toxic disinfection by-products (DBPs). The objective of this study was to determine the impact of ICM in source waters and the type of disinfectant on the overall toxicity of DBP mixtures and to determine which ICM and reaction conditions give rise to toxic by-products. Source waters collected from Akron, OH were treated with five different ICMs, including iopamidol, iopromide, iohexol, diatrizoate and iomeprol, with or without chlorine or chloramine disinfection. The reaction product mixtures were concentrated with XAD resins and the mammalian cell cytotoxicity and genotoxicity of the reaction mixture concentrates was measured. Water containing iopamidol generated an enhanced level of mammalian cell cytotoxicity and genotoxicity after disinfection. While chlorine disinfection with iopamidol resulted in the highest cytotoxicity overall, the relative iopamidol-mediated increase in toxicity was greater when chloramine was used as the disinfectant compared with chlorine. Four other ICMs (iopromide, iohexol, diatrizoate, and iomeprol) expressed some cytotoxicity over the control without any disinfection, and induced higher cytotoxicity when chlorinated. Only iohexol enhanced genotoxicity compared to the chlorinated source water.     

A new way of carbon accounting emphasises the crucial role of sustainable timber use for successful carbon mitigation strategies

The roles of forest management and the use of timber for energy in the global carbon cycle are discussed. Recent studies assert that past forest management has been accelerating climate change, for example in Europe. In addition, the increasing tendency to burn timber is an international concern. Here, we show a new way of carbon accounting considering the use of timber as a carbon neutral transfer into a pool of products. This approach underlines the robust, positive carbon mitigation effects of sustainable timber harvesting. Applying this new perspective, sustainable timber use can be interpreted not as a removal but a prevention of carbon being converted within the cycle of growth and respiration. Identifying timber use as a prevention rather than a removal leads to the understanding of timber use as being no source of carbon emissions of forests but as a carbon neutral transfer to the product pool. Subsequently, used timber will then contribute to carbon emissions from the pool of forest products in the future. Therefore, timber use contributes to carbon mitigation by providing a substantial delay of emissions. In a second step, the carbon model is applied to results of a previous study in which different timber price scenarios were used to predict timber harvests in Bavarian forests (Germany). Thus, the influence of the economic dimension “timber price” on the ecological dimension carbon sequestration was derived. It also shows that these effects are stable, even if an increasing tendency of burning timber products for producing energy is simulated. Linking an economic optimization to a biophysical model for carbon mitigation shows how the impact of management decisions on the environment can be derived. Overall, a sustainably managed system of forests and forest products contributes to carbon mitigation in a positive, stable way, even if the prices for (energy) wood rise substantially.