Soil and plant biodegradation of chlorpyrifos in fields of cauliflower and brussels sprouts crops

For the protection of early and summer cauliflower and brussels sprouts crops against root fly, the insecticide chlorpyrifos was applied at planting onto soil around the stem of the plant, or in the planting line. In the soil, chlorpyrifos (1) was transformed into the insecticide metabolites oxon, 0,0‐diethyl‐0‐(3,5,6‐tri‐chloro‐2‐pyridinyl) phosphate (2), and 3,5,6‐trichloro‐2‐pyridinol (3). The soil half life time of chlorpyrifos could be 2.8 times greater (42 days relative to 15 days) when the field history as to cauliflower monoculture and insecticide treatments was short (1 year), than when it was long (8 years). Rains and season also had cumulative effects on the chlorpyrifos soil half life times. In the leaves of cabbage, chlorpyrifos and compound 3 were observed at concentrations which were higher, especially when their soil concentrations were high. Chlorpyrifos and compounds 2 and 3 however were not detected in the “flower” of cauliflower, nor in the brussels sprouts itself, the limit of sensitivity being 0.02 ppm of fresh weight.     

Short-term variability and control of phytoplankton photosynthetic activity in a macrotidal ecosystem (the Strait of Dover, eastern English Channel)

Short-term changes in phytoplankton photosynthetic activity were studied during different periods of the years 2009 and 2010 in the coastal waters of a macrotidal ecosystem (the Strait of Dover, eastern English Channel). During each sampling period, samples were taken every 1.45 h., from sunrise to sunset, during at least 5 days distributed along a complete spring–neap tide cycle. The photosynthetic parameters were obtained by measuring rapid light curves using pulse amplitude modulated fluorometry and were related to environmental conditions and phytoplankton taxonomic composition. The maximum quantum yield (F _v/F _m) showed clear light-dependent changes and could vary from physiological maxima (0.68–0.60) to values close to 0.30 during the course of 1 day, suggesting the operation of photoprotective mechanisms. The maximum electron transport rate (ETR_m) and maximal light utilization efficiency (α) were generally positively correlated and showed large diel variability. These parameters fluctuated significantly from hour to hour within each day and the intraday pattern of variation changed significantly among days of each sampling period. Stepwise multiple linear regressions analyses indicated that light fluctuations explained a part of this variability but a great part of variability stayed unexplained. F _v/F _m, ETR_m and α were not only dependent on the light conditions of the sampling day but also on those of the previous days. A time lag of 3 days in the effect of light on ETR_m and α variation was highlighted. At these time scales, changes in phytoplankton community structure seemed to have a low importance in the variability in photosynthetic parameters. The photoacclimation index E _k showed a lower variability and was generally different from the incident irradiance, indicating a limited acclimation capacity with a poor optimization of light harvesting during the day. However, in well-mixed systems such as the Strait of Dover, the short-term photoacclimation is disrupted by the high level of variability in environmental conditions. Also, the variability observed in the present study can be associated with a particular kind of photosynthetic response: the “E _k-independent” variability. The physiological basis of this photosynthetic response is largely unresolved and further researches on this subject are still required to better explain the dynamics of phytoplankton activity in the Strait of Dover.     

The link between social network density and rank-order consistency of aggressiveness in juvenile eels

The emergence of an animal’s personality is the result of interactions between genetics, environment and experience. It is known that individuals are able to modulate their behaviour according to the context or the social environment. Many studies have shown for example, that familiarity among conspecifics diminishes aggressiveness, although little is known about the underlying processes. Nevertheless, personality traits have long been determined while ignoring the social context, especially in lower vertebrates such as fish. In the present experiment, we hypothesize that group connections (network density) may be positively correlated to consistency of aggressiveness by avoiding over-aggressive acts in further encounters. To test this hypothesis, we used eels (Anguilla anguilla) as a model species and monitored both aggressiveness and sociability in 64 individuals over their first 7 months of growth from the glass eel stage. As expected, social fish were less aggressive than their non-social counterparts at all times, highlighting the existence of a behavioural syndrome in eels. Additionally, rank-order consistency of aggressiveness was higher in groups of fish with high social connectivity, compared to those in less-connected fish groups. While aggressiveness must be consistent to be considered a personality trait, our results suggest that both aggressiveness and its consistency are influenced by initial social context.     

A method for supporting the design of efficient heating systems using EU product policy data

The design of heating, ventilation and air conditioning systems is still a challenging engineering task which requires experienced and informed decision-making. These systems have a great energy-saving potential at the system level rather than at the level of the individual products of which they are composed. European environmental product policies have been very useful in facilitating a homogeneous rating scheme which can be used to compare the energy performance of different products that provide the same service. This paper proposes a simplified design method which uses the performance of components that are regulated by European product policies to obtain the overall performance of heating systems in residential buildings. It is a flexible method and allows different product configurations to be assessed so as to optimise the system performance during the design phase. The method is tested on a real case study with domestic hot water and space heating systems. The case study shows the potential for improving the heating systems according to the performance levels of its products currently available in the market. Results of the domestic hot water system show that upgrading its storage tank to the maximum energy class (A⁺) could bring the highest energy savings ( 4162 kWh/y).     

Monotonic aspects of the mechanical behaviour of bottom ash from municipal solid waste incineration and its potential use for road construction

Municipal solid waste incineration (MSWI) bottom ash is an atypical granular material because it may include industrial by-products that result from the incineration of domestic waste. The prospects for the beneficial use of this particular material mainly lie in the field of road construction, as a substitute for the traditional natural aggregates. However, its mechanical properties are still little known, particularly in term of stiffness and deformability, characteristics that are essential to the construction of a durable roadway. The purpose of this paper is to describe better the mechanical behaviour of this recycled material. In order to reach this objective, a large experimental campaign is presented. The first part of this paper presents and comments in detail on the results obtained from static monotonic tests. Oedometric and triaxial shear tests were performed on MSWI bottom ash both before and after treatment with a specific hydraulic binder. These tests allow specification of the mechanical characteristics of the MSWI bottom ash, such as the initial Young's modulus, Poisson's ratio, the compressibility index, the friction angle, and the contracting or dilating behaviour of the material. The results reveal a mechanical behaviour similar to that of initially dense standard materials (sands, unbound granular materials) and a dependence on the applied average pressure, characteristic of the mechanical behaviour of granular media. More laboratory data on other samples of MSWI bottom ash are required to ensure that this comparison is statistically valid.     

A general kinetic law for heavy metal vaporization during municipal solid waste incineration

Metal emissions from waste incineration plants become a great environmental concern because of their toxicity for both human health and environment. Metals are not destroyed by high-temperature thermal treatment and some vaporized metals may be emitted. It is thus essential to understand the release mechanism of metals during high-temperature waste treatment, in order to improve the understanding of their behavior and the control of their emission. The objective of this study is to identify the kinetic law for metal release from realistic artificial waste. The vaporization of three metals of most concern (Cd, Pb and Zn) during municipal waste incineration was studied. The vaporization rate at the particle level was determined from the experimental concentration profile in the outlet gas of a fluidized bed reactor, by using the inverse method that was previously developed and validated by our team. As a first step, the kinetic parameters were determined thanks to experiments carried out at several temperatures. Specific laws, for each studied metal, were thus obtained as a function of temperature. Nevertheless, it is very useful to identify all the experimental kinetic curves (all studied metals at all temperatures) to one single mathematical law. Therefore, a general kinetic law, expressing the solid matrix influence on the metal vaporization dynamic, was determined as a second step. It permits to predict the vaporization characteristic time and the time course of the metal concentration in the waste.     

Detection and quantification of chlordecone in contaminated soils from the French West Indies by GC-MS using the 13C10-chlordecone stable isotope as a tracer

Chlordecone is an organochlorine insecticide that has been widely used to control banana weevil in the French West Indies. As a result of this intense use, up to 20,000 ha are contaminated by this insecticide in the French West Indies, and this causes environmental damage and health problems. A scenario of exposure was drawn by French authorities, based on land usage records. Many efforts have been made to monitor the occurrence of chlordecone and its main metabolites using different analytical methods, including GC, GC/MS, LC/MS, and NIRS. Although these different methods allow for the detection and quantification of chlordecone from soils, none of them estimate the bottleneck caused by extraction of this organochlorine from soils with high adsorption ability. In this study, we used ¹³C₁₀-chlordecone as a tracer to estimate chlordecone extraction yield and to quantify chlordecone in soil extracts based on the ¹³C/¹²C isotope dilution. We report the optimization of ¹³C₁₀-chlordecone extraction from an Andosol. The method was found to be linear from 0.118 to 43 mg kg^?1 in the Andosol, with an instrumental detection limit estimated at 8.84 μg kg^?1. This method showed that chlordecone ranged from 35.4 down to 0.18 mg kg^?1 in Andosol, Nitisol, Ferralsol, and Fluvisol soil types. Traces of the metabolite β-monohydrochlordecone were detected in the Andosol, Nitisol, and Ferralsol soil samples. This last result indicates that this method could be useful to monitor the fate of chlordecone in soils of the French West Indies.     

Exposure assessment of French women and their newborns to tetrabromobisphenol-A: occurrence measurements in maternal adipose tissue, serum, breast milk and cord serum

A French monitoring study was initiated to evaluate the exposure of fetus and newborn to brominated flame retardants (BFR). A previously developed multi-residue analytical method was used for measuring the main classes of BFR (tetrabromobisphenol-A, and tri- to decabomodiphenyl ethers) in various human biological matrices. Analyzed samples (maternal and cord serum, adipose tissue and breast milk) were collected from 93 volunteer women during caesarean deliveries. TBBPA was detected in 44% of the analyzed breast milk samples, at levels varying from 0.06 to 37.34 ng g(-1) lipid weight, but was not detected in adipose tissue. This compound was also detected in 30% of the analyzed serum samples, with similar average values in maternal and cord serum (154 pg g(-1) fresh weight versus 199 pg g(-1) fresh weight, respectively). The interpretation of the collected data permitted the demonstration of (1) a significant exposure to TBBPA both for mothers and fetuses and (2) a possible risk of overexposure of newborns through breastfeeding.     

Sucrose amendment enhances phytoaccumulation of the herbicide atrazine in Arabidopsis thaliana

Growth in the presence of sucrose was shown to confer to Arabidopsis thaliana (thale cress or mustard weed) seedlings, under conditions of in vitro culture, a high level of tolerance to the herbicide atrazine and to other photosynthesis inhibitors. This tolerance was associated with root-to-shoot transfer and accumulation of atrazine in shoots, which resulted in significant decrease of herbicide levels in the growth medium. In soil microcosms, application of exogenous sucrose was found to confer tolerance and capacity to accumulate atrazine in Arabidopsis thaliana plants grown on atrazine-contaminated soil, and resulted in enhanced decontamination of the soil. Application of sucrose to plants grown on herbicide-polluted soil, which increases plant tolerance and xenobiotic absorption, thus appears to be potentially useful for phytoremediation.