Biostabilization of municipal solid waste

A mechanical-biological process for municipal solid waste (MSW) treatment was monitored for one year. Mechanical pre-treatment provided two fractions. The oversize fraction (diameter > 50 mm) (yield of 600 g kg(-1) ww) (46 Mg day(-1)) was used for refuse derived fuel production, after undergoing a mechanical refining processes, because of low moisture content (200-250 g kg(-1)) and high calorific value (2500-2800 kcal kg ww(-1)). The undersize fraction (diameter < 50 mm) (yield 400 g kg(-1) ww) (30 Mg day(-1)) contained about 800 g kg(-1) of the MSW organic matter. This fraction was biologically treated using an aerobic process with an organic waste fraction from separate collection (77 Mg day(-1)) and recycled stabilized material (62 Mg day(-1)) obtained from end-product sieve (diameter < 20 mm) used as bulking agent. A retention time of three weeks was sufficient to obtain stabilized products in agreement with up-dated rules of the Lombardy Region (North Italy) regarding biostabilization and composting processes. Dynamic Respiration Index (DRI), such as required by both Lombardy Region rules and suggested by the European Community, was chosen in preference to other indices in order to assess the degree of biological stability of the end products. A mean DRI value of 1164 mg O2 kg SV(-1) h(-1) was obtained and is in agreement with the proposed limit of 1000+/-200 mg O2 kg SV(-1) h(-1). Self-heating test, potential biogas production and fermentable volatile solids were also used as parameters to describe the potential impact of treated waste, providing further useful information. Nevertheless, all of these methods revealed analytical or interpretative limits. A complete mass balance of the biological treatment section showed that, from a net input of 107 Mg day(-1), only 250 g kg(-1) (27 Mg day(-1)) of the waste needed to be landfilled, with 750 g kg(-1) (80 Mg day(-1)) being lost as CO2 and H2O.     

Variations de la concentration bactérienne dans les eaux et les sédiments littoraux

Bacterial counts, carried out bi-mouthly over 2 years, at diverse localities on the Provence shores (France), revealed that the bottom-water microflora is not dependent on chemical and biological characteristics of the upper sediment layer. Freshwater inflow, polluted or non-polluted, and high concentrations of suspended particulate matter usually induce the highest bacterial counts. The concentration of microflora in marine muds and sands is connected with their organic content. There is no apparent correlation with water microflora concentration or macrobenthos density. The area of highest bacterial concentration is restricted to a narrow, thin belt of littoral sediment. Bacterial transformation is probably more important in the water mass as a whole than in marine deposits. The annual range of variations in microflora distribution is higher than the range which was encountered when testing the validity of the bacterial count method with the sampling technique employed. Certain bacterial concentrations, appearing simultaneously in different sediment layers and at different stations seem to be related to ecological factors. Such variations seem to realize a true annual cycle. The highest counts occur during the warm season, unlike the phytoplankter populations. Bacterial proliferation in water masses usually succeeds to phytoplankton blooms.     

Biodegradability of soil water soluble organic carbon extracted from seven different soils

Water soluble organic carbon (WSOC) is considered the most mobile and reactive soil carbon source and its characterization is an important issue for soil ecology study. A biodegradability test was set up to study WSOC extracted from 7 soils differently managed. WSOC was extracted from soil with water (soil/water ratio of 1:2, W/V) for 30 min, and then tested for biodegradability by a liquid state respirometric test. Result obtained confirmed the finding that WSOC biodegradability depended on both land use and management practice. These results suggested the biodegradability test as suitable method to characterize WSOC, adding useful information to soil fertility.     

Mechanical and microstructural properties prediction by artificial neural networks in FSW processes of dual phase titanium alloys

Friction Stir Welding (FSW), as a solid state welding process, seems to be one of the most promising techniques for joining titanium alloys avoiding a large number of difficulties arising from the use of traditional fusion welding processes. In order to pursue cost savings and a time efficient design, the development of numerical simulations of the process can represent a valid choice for engineers. In the paper an artificial neural network was properly trained and linked to an existing 3D FEM model for the FSW of Ti–6Al–4V titanium alloy, with the aim to predict both the microhardness values and the microstructure of the welded butt joints at the varying of the main process parameters. A good agreement was found between experimental values and calculated results.     

Selective uptake of major and trace elements in Erica andevalensis, an endemic species to extreme habitats in the Iberian Pyrite Belt

To assess the ecophysiological traits and the phytoremediation potential of the endemic heather Erica andevalensis,we determined the concentrations of major and trace elements in different plant parts and in rizosphere soils from Riotinto mining district (Huelva,Spain).The results showed that E.andevalensis may grow on substrates with very high As,Cu,Fe and Pb concentrations (up to 4114,1050,71900 and 15614 μg/g dry weight,respectively),very low availability of macro-and micronutrients and with pH values ra...     

Analysis of the genotoxic potential of low concentrations of Malathion on the Allium cepa cells and rat hepatoma tissue culture

Based on the concentration of Malathion used in the field, we evaluated the genotoxic potential of low concentrations of this insecticide on meristematic and F₁ cells of Allium cepa and on rat hepatoma tissue culture (HTC cells). In the A. cepa, chromosomal aberrations (CAs), micronuclei (MN), and mitotic index (MI) were evaluated by exposing the cells at 1.5, 0.75, 0.37, and 0.18 mg/mL of Malathion for 24 and 48 hr of exposure and 48 hr of recovery time. The results showed that all concentrations were genotoxic to A. cepa cells. However, the analysis of the MI has showed non-relevant effects. Chromosomal bridges were the CA more frequently induced, indicating the clastogenic action of Malathion. After the recovery period, the higher concentrations continued to induce genotoxic effects, unlike the observed for the lowest concentrations tested. In HTC cells, the genotoxicity of Malathion was evaluated by the MN test and the comet assay by exposing the cells at 0.09, 0.009, and 0.0009 mg/5 mL culture medium, for 24 hr of exposure. In the comet assay, all the concentrations induced genotoxicity in the HTC cells. In the MN test, no significant induction of MN was observed. The genotoxicity induced by the low concentrations of Malathion presented in this work highlights the importance of studying the effects of low concentrations of this pesticide and demonstrates the efficiency of these two test systems for the detection of genetic damage promoted by Malathion.     

Auto shredder residue recycling: Mechanical separation and pyrolysis

Directive 2000/53/EC sets a goal of 85% material recycling from end-of-life vehicles (ELVs) by the end of 2015. The current ELV recycling rate is around 80%, while the remaining waste is called automotive shredder residue (ASR), or car fluff. In Europe, this is mainly landfilled because it is extremely heterogeneous and often polluted with car fluids. Despite technical difficulties, in the coming years it will be necessary to recover materials from car fluff in order to meet the ELV Directive requirement. This study deals with ASR pretreatment and pyrolysis, and aims to determine whether the ELV material recycling target may be achieved by car fluff mechanical separation followed by pyrolysis with a bench scale reactor. Results show that flotation followed by pyrolysis of the light, organic fraction may be a suitable ASR recycling technique if the oil can be further refined and used as a chemical. Moreover, metals are liberated during thermal cracking and can be easily separated from the pyrolysis char, amounting to roughly 5% in mass. Lastly, pyrolysis can be a good starting point from a "waste-to-chemicals" perspective, but further research should be done with a focus on oil and gas refining, in order both to make products suitable for the chemical industry and to render the whole recycling process economically feasible.     

Phosphorus removal from livestock effluents: recent technologies and new perspectives on low-cost strategies

Environmental Science and Pollution Research - Phosphorus is an essential element in the food production chain, even though it is a non-renewable and limited natural resource, which is going to run...     

A multi-lysimeter investigation on the mobility and persistence of pesticides in the loam soil of the Fucino Plain (Italy)

In order to evaluate the impact of intensive horticulture on the water resources of the Fucino Plain, one of the most important agricultural settlements of Central Italy, the mobility and persistence in the soil of five commonly used pesticides was investigated by means of multi-lysimeter experiments. The fate of simazine, carbaryl, dicloran, linuron and procymidone was evaluated in the laboratory under experimental conditions simulating as closely as possible both pesticide application and irrigation practices required by the local crops. An efficient extraction procedure followed by chromatographic analysis, allowing the simultaneous determination of the applied chemicals, was used to monitor the pesticide residues in the soil columns as a function of time from application and depth. The experiment, carried out for about 60 days, revealed that soil contamination apparently involves only the surface layer since none of the investigated pesticides was detected at depths greater than 20-30 cm. However, the five pollutants exhibit a quite different behaviour that can be related to their physico-chemical properties.     

Precision determination for the dynamic respirometric index (DRI) method used for biological stability evaluation on municipal solid waste and derived products

Dynamic respiration index (DRI) is an effective respirometric method to measure the biological stability of municipal solid waste (MSW). It allows testing MSW biological stability under standardized conditions and is now used as a routine analytical method. However, the method needs to be studied for precision parameters to ensure the quality of results generated.This work reports on a DRI validation study, detecting repeatability (r) and reproducibility limits (R). To perform the study, 4-6 Italian laboratories took part in an interlaboratory test for the validation of the DRI method on four different municipal solid wastes from different mechanical-biological treatment full-scale plants. Precision values (r and R) of DRI, expressed as relative standard deviation, were in the range of 3.6% and 15.5%, and were acceptable when compared with previous data obtained in another respirometric test. On the other hand, no regressions were found between r and R, and DRI, and as a consequence prediction of precision values was not possible a priori for different DRI levels, unless the same typology of waste was considered.