牛粪堆肥系统环境因子对抗性基因的影响

本研究利用实时定量PCR技术检测牛粪60 d好氧堆肥过程中典型四环素类抗性基因(tet Q、tet W、tet M、tet G、tet A和tet X)和大环内酯类抗性基因(erm35、erm36、erm B、erm F、erm T和erm X)的数量变化规律,系统研究了温度、含水率、挥发性有机质(VS)含量、碳氮比(C/N)、pH值、氧化还原电位(ORP)等堆肥系统环境因子和细菌数量(TCB)对这两类典型抗生素抗性基因的影响.结果表明,堆肥升温阶段牛粪中tet Q、tet W、tet G和tet X数量分别增加1. 7、0. 3、84. 8和4. 5倍,而tet M丰度降低了83. 1%;堆肥腐熟阶段牛粪中tet G和tet X数量分别增加23. 8和11. 5倍,而tet W、tet Q和tet M数量均降低90%.整个牛粪堆肥过程中erm35、erm36、erm B、erm F、erm T和erm X丰度分别增加2. 1、430. 4、0. 6、11. 5、2. 1和49. 1倍. RDA分析表明,牛粪堆肥过程中对四环素与大环内酯类抗性基因数量影响较大的3个环境因子分别为:ORP(54. 8%)、温度(34%)和VS(11. 3%),其中ORP与erm X和erm B、温度与tet Q和erm F以及VS与tet W数量均呈明显地正相关.     

基于有机物释放和经济性的污泥预处理方法评价

污泥预处理方法包括机械法、化学法和生物法,选择上述方法中具有代表性的超声波20 k Hz、p H 10和厌氧70℃分别预处理污泥,从有机物释放情况和经济性评价不同预处理方法.结果表明,污泥经过预处理后,液相中有机物释放量均增多,但经过p H 10和厌氧70℃预处理后能释放更多的有机物,反应结束时其总溶解性蛋白质和多糖由预处理前的418. 9mg·L~(-1)(以COD计,下同)分别增加到7 516. 0 mg·L~(-1)和7 892. 5 mg·L~(-1),DNA浓度由预处理前的18. 1 mg·L~(-1)依次增加到1 343. 3 mg·L~(-1)和1 766. 1 mg·L~(-1);通过流式细胞术鉴定细胞形态得出预处理结束时污泥细胞死亡率从高到低为61. 6%(p H10)、59. 9%(厌氧70℃)和34. 5%(超声波20 k Hz),相比预处理前分别提高45. 6%、43. 9%和18. 5%;预处理结束时污泥有机物去除率依次为19. 1%(p H 10)、13. 8%(厌氧70℃)和7. 6%(超声波20 k Hz);单位体积污泥经p H 10预处理比超声-20kHz和厌氧70℃分别多节约28. 5%和124. 1%.基于本研究中污泥有机物释放量和经济性,污泥预处理方法宜选择化学法(p H 10).     

碳链延长技术在有机资源回收领域的研究进展

本文综述了碳链延长技术在处理有机废料及碳资源回收领域的优势,梳理了其发展历程为后续研究提供方向指导,阐释了其生化代谢途径中物质转变、能量传递和信号传输等机理,验证了其延长为丁酸、己酸等产物的热力和动力学可行性,总结归纳了其已优化的关键反应参数和已运行的工程试验案例等方面内容.本文为揭示细胞碳链延长机制和应用碳链延长技术于实际废料治理提供理论基础和建议展望.     

重庆市O3污染日的大气环流分型与传输特征

通过分析重庆市主城区2015~2019年O₃浓度和气象要素观测数据,发现主城区O₃超标日数、超标日O₃中位值和90百分位浓度值均呈现逐年升高趋势,O₃与温度成正相关、与相对湿度成负相关,高O₃浓度对应每日最高温度区间为35℃以上以及相对湿度区间70%以下.采用T-mode主成分分析法(PCT)对2015~2019年的4~9月850hPa低层位势高度场和风场进行分型,总结出重庆市O₃污染期间主要有8种天气类型,其中有利于出现高浓度O₃现象的天气类型分别是低压西北侧型(T1)、低压后部型(T4)和高压西侧(T3),对应O₃平均超标率分别为34.6%、17.0%和14.2%.利用HYSPLIT4模型后向轨迹聚类方法和潜在源贡献算法(PSCF),计算得到O₃污染日的气团主要以中短距离输送为主,主要传输轨迹来自北、东北、南以及西南四个方向,从2015~2019年,主要污染来源有一个明显的从北转南的趋势,O₃污染的潜在源贡献分析结果与全市工业源NO_x、VOCs排放量空间分布的一致性较高.     

北京大气PM2.5载带金属浓度、来源及健康风险的城郊差异

为探究北京地区大气PM_2.5载带金属在城区和郊区污染特征、来源及其健康风险的差异,于2017年6~11月采集海淀和大兴两地的PM_2.5日样本,分析PM_2.5及其载带的13种金属浓度.利用PMF源解析方法对13种金属元素来源进行分析,并采用健康风险评价方法对其中9种金属的健康危害进行评估.结果表明,城区PM_2.5及Cr、Co、Mn和Ni等10种金属浓度与郊区均有显著差异（P<0.05）.源解析结果发现,城区和郊区均可解释为4个源,但来源略有不同,占比亦有差异.城区的为机动车源（51.2%）、燃煤来源（19.1%）、扬尘来源（19.3%）和燃油来源（10.4%）;郊区的为机动车源（47.9%）、燃煤来源（22.6%）、扬尘来源（20.2%）和电镀来源（9.3%）.健康风险评价结果表明,城郊各金属HQ值均小于1,均不存在非致癌风险.城区中Ni和Pb,郊区中Cd、Co、Ni和Pb可忽略致癌风险,而城区的As（2.77×10^-5）、Cd（2×10^-6）、Co（1.76×10^-6）和Cr（Ⅵ）（7.88×10^-6）,郊区的As（8.34×10^-6）和Cr（Ⅵ）（4.94×10^-6）的R值介于10^-6与10^-4之间,具有一定的致癌风险.     

Efficient degradation of Rhodamine B by magnetically recoverable Fe3O4-modified ternary CoFeCu-layered double hydroxides via activating peroxymonosulfate

Environment-friendly nano-catalysts capable of activating peroxymonosulfate (PMS) have received increasing attention recently. Nevertheless, traditional nano-catalysts are generally well dispersed and difficult to be separated from reaction system, so it is particularly important to develop nano-catalysts with both good catalytic activity and excellent recycling efficiency. In this work, magnetically recoverable Fe₃O₄-modified ternary CoFeCu-layered double hydroxides (Fe₃O₄/CoFeCu-LDHs) was prepared by a simple co-precipitation method and initially applied to activate PMS for the degradation of Rhodamine B (RhB). X-ray diffraction (XRD), fourier transform infrared spectrometer (FT-IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller method (BET), and vibrating sample magnetometer (VSM) were applied to characterize morphology, structure, specific surface area and magnetism. In addition, the effects of several key parameters were evaluated. The Fe₃O₄/CoFeCu-LDHs exhibited high catalytic activity, and RhB degradation efficiency could reach 100% within 20 min by adding 0.2 g/L of catalyst and 1 mmol/L of PMS into 50 mg/L of RhB solution under a wide pH condition (3.0-7.0). Notably, the Fe₃O₄/CoFeCu-LDHs showed good super-paramagnetism and excellent stability, which could be effectively and quickly recovered under magnetic condition, and the degradation efficiency after ten cycles could still maintain 98.95%. Both radicals quenching tests and electron spin resonance (ESR) identified both HO? and SO₄^?? were involved and SO₄^?? played a dominant role on the RhB degradation. Finally, the chemical states of the sample's surface elements were measured by X-ray photoelectron spectroscopy (XPS), and the possible activation mechanism in Fe₃O₄/CoFeCu-LDHs/PMS system was proposed according to comprehensive analysis.     

水面舰船风浪环境适应性内涵及综合评估方法研究

首先对水面舰船风浪环境适应性的内涵进行了分析,重点研究了风浪环境对舰船综合航行性能及作战使用效能的影响.考虑到实际风浪环境中舰船各项总体性能指标是一个复杂的体系,各指标之间既具有矛盾性又具有一致性,是一个多目标、多变量的复杂系统.提取了跟风浪环境相关性较强的船体性能指标,建立了水面舰船风浪环境适应性多级综合评价指标体系.进而应用多级模糊综合评价模型,建立了舰船风浪环境适应性评估方法,对某深V船型和圆舭船型的风浪环境适应性进行评估,深V船型评估结果为66.95,圆舭船型为50.5,验证了评估模型的合理性.采用4种不同评判矩阵对两船风浪环境适应性进行了评估,结果表明,评判矩阵的选取对评估结果有较大影响.     

Glass recycling in cement production--an innovative approach

An innovative approach of using waste glass in cement production was proposed and tested in a laboratory and cement production plant. The laboratory characterization of 32 types of glass show that the chemical composition of glass does not vary significantly with its color or origin but depends on its application. The alkali content of glass, a major concern for cement production varies from 0 to 22%. For the glass bottles mainly found in Hong Kong waste glasses, the alkali content (Na2O) ranges from 10 to 19% with an average around 15%. There is no significant change of the SO2 content in the gas exhaust of the rotary kiln when about 1.8 t/h of glass bottles were loaded along with the 280-290 t/h raw materials. The content of NOx, mainly depends on the temperature of the kiln, does not show significant change either. The SO3 content of the clinker is comparable with that obtained without the loading of glass. The alkaline content shows a slight increase but still within three times the standard deviation obtained from the statistical data of the past year. The detailed analysis of the quality of the cement product shows that there is not any significant impact of glass for the feeding rate tested.     

MnO2@Fe3O4/石墨烯复合材料对水中Pb(Ⅱ)的吸附

以氧化石墨烯（GO）为原料制备MnO₂@Fe₃O₄/石墨烯（RGO）,考察吸附过程中MnO₂@Fe₃O₄/RGO投加量、溶液pH值、初始浓度和吸附时间等因素对Pb（Ⅱ）的去除率和吸附量的影响,并运用BET比表面积测试法计算MnO₂@Fe₃O₄/RGO的比表面积和平均孔径,采用扫描电子显微镜（SEM）,振动样品磁强计（VSM）,X射线衍射（XRD）和X射线光电子能谱（XPS）等对样品进行表征.结果表明：MnO₂@Fe₃O₄/RGO的比表面积为89.164m²/g,孔容为0.284cm³/g;随着pH值在2~10范围内增加,复合材料对Pb（Ⅱ）的去除率先增大后减小,pH=6时达到最大值.通过4种等温吸附模型（Langmuir、Freundlich、Temkin、D-R模型）和4种吸附动力学模型（伪一级动力学、伪二级动力学、Elovich、颗粒内扩散模型）拟合发现,MnO₂@Fe₃O₄/RGO对Pb（Ⅱ）吸附符合伪二级动力学模型.吸附等温线更符合Langmiur模型,属于典型的单分子层吸附,以化学吸附为主,最大吸附量为265.3mg/g.     

Fabrication and characterization of lightweight aggregate prepared from steel mill sludge in one step

Journal of Material Cycles and Waste Management - The qualified green lightweight aggregate (LWA) was successfully prepared from steel mill sludge (SMS) and fly ash (FAS) in one step using the...