Characteristics of aerosols collected in central Taiwan during an Asian dust event in spring 2000

Aerosol samples for PM(2.5) and PM(2.5-10) were collected at four locations in central Taiwan from 26 to 31 March 2000, a period that experienced exceedingly high PM levels from 29 to 30 March due to the passage of an Asian dust storm. The samples were analyzed for mass, metallic elements, ions, and carbon. The purpose of this paper is to investigate the influence of the dust storm on the characteristics of local ambient particulate matter. The results indicate that the concentrations of the crustal elements Ca, Mg, Al, Fe and the sea salt species Na+ and Cl- in PM(2.5-10) during the dust episode exceed the mean concentrations in the non-dust period by factors of 3.1, 2.9, 2.6, 2.2, 2.3 and 2.1 respectively. Enrichment factors of Ca, Fe, and Mg in PM(2.5-10) during the dust event are close to unity, indicating that these elements are from soil. Reconstruction of aerosol compositions revealed that soil of coarse particulates elevated approximately 50% in the dust event. It is noted that during the dust event, the ratio of Mg/Al in PM(2.5-10) ranged from 0.21 to 0.25 while that of Ca/Al ranged from 0.6 to 0.9, levels more constant than those obtained in non-dust period.     

Effect of photosensitizer diethylamine on the photodegradation of polychlorinated biphenyls

The objective of this study was to investigate the effect of diethylamine and xenon simulated sunlight on the photodegradation of two forms of PCBs including PCBs in transformer oil and PCB congener 138. The result of GC chromatograms illustrated the shifting pattern of higher chlorinated biphenyls in transformer oil degraded to lower chlorinated biphenyls with the extension of exposure time. The effect of diethylamine and xenon simulated sunlight was significant on the photodegradation of both PCBs in transformer oil and congener 138. The initial degradation rates of congener 138 (1.14 x 10(-9) to 4.47 x 10(-9) mol l(-1) h(-1)) were in direct proportion to the initial concentrations of congener 138 which confirmed the pseudo-first-order reaction of PCB photodegradation. The apparent quantum yields (phi) of congener 138 using diethylamine in xenon photoreactor were ranged between 2.08 x 10(-2) and 9.8 x 10(-4). PCB congeners 123, 97, 70, 67, 33, 29, 17, 12, and 9 were detected as the descendants of the photodegradation of congener 138 through dechlorination. The major pathway of congener 138 photodegradation in this study was via para-dechlorination.     

Manganese uptake and accumulation by the hyperaccumulator plant Phytolacca acinosa Roxb. (Phytolaccaceae)

The perennial herb Phytolacca acinosa Roxb. (Phytolaccaceae), which occurs in Southern China, has been found to be a new manganese hyperaccumulator by means of field surveys on Mn-rich soils and by glasshouse experiments. This species not only has remarkable tolerance to Mn but also has extraordinary uptake and accumulation capacity for this element. The maximum Mn concentration in the leaf dry matter was 19,300 microg/g on Xiangtan Mn tailings wastelands, with a mean of 14,480 microg/g. Under nutrient solution culture conditions, P. acinosa could grow normally with Mn supplied at a concentration of 8000 micromol/l, although with less biomass than in control samples supplied with Mn at 5 micromol/l. Manganese concentration in the shoots increased with increasing external Mn levels, but the total mass of Mn accumulated in the shoots first increased and then decreased. At an Mn concentration of 5000 micromol/l in the culture solution, the Mn accumulation in the shoot dry matter was highest (258 mg/plant). However, the Mn concentration in the leaves reached its highest value (36,380 microg/g) at an Mn supply level of 12,000 micromol/l. These results confirm that P. acinosa is an Mn hyperaccumulator which grows rapidly, has substantial biomass, wide distribution and a broad ecological amplitude. This species provides a new plant resource for exploring the mechanism of Mn hyperaccumulation, and has potential for use in the phytoremediation of Mn-contaminated soils.     

农药污染地下水的微生物治理及含水层渗透性变化研究

采用了从农药厂阿特拉津生产车间排污口污泥中分离出的菌种AT菌 ,进行了农药阿特拉津污染地下水微生物治理的模拟实验研究 ,在实验条件 (T =10℃ ,pH =7.5 )与野外含水层的条件基本一致情况下 ,难于生物降解的污染质阿特拉津的一次投菌降解率可达 3 1.0 8% ;设计了两种有效细菌的投放方式以模拟野外条件下的菌种投加条件。另外 ,AT菌的作用会造成被治理含水层的渗透性能降低 ,两种投菌方式下 ,实验后含水层的渗透系数分别下降 60 .5 4%和 3 4 5 6%。清水冲洗 10d的渗透性恢复率分别为 48.96%及 81.3 6% ,说明清水渗透恢复的方法效果明显     

Wet air oxidation of a reactive dye solution using CoAlPO(4)-5 and CeO(2) catalysts

Wet air oxidation of a prepared reactive dye solution was performed to assess the efficacy of CoAlPO(4)-5 and CeO(2) as catalysts in the reaction. Via adsorption and oxidation of dye, CoAlPO(4)-5 effectively decreased American Dye Manufacturers Institute and chemical oxygen demand (COD) values in the dye solution. At a reaction temperature of 135 degrees C and an applied pressure of 1.0 MPa, color and COD removal were as high as 95% and 90%, respectively, after 2 h. Active sites on the outer surface of CoAlPO(4)-5 are responsible for adsorption and decomposition of dye while active sites in the pores dominate further destruction and oxidation of intermediate products. Since the outer surface only represents a minor part of the total surface, the color removal does not increase appreciably with loading of CoAlPO(4)-5. The CeO(2) catalyst, calcined from cerium chloride under high thermal impact (type A CeO(2)) was very effective in removing color and COD from the solution. This catalyst demonstrated near 100% color removal at temperatures above 135 degrees C and the COD removal could be above 95% at 165 degrees C. With both CoAlPO(4)-5 and CeO(2) catalysts, COD rose and then fell back during the reaction, a feature typical of a consecutive reaction. In contrast to prepared CeO(2), a commercial CeO(2) did not exhibit any catalytic ability for the removal of color and COD. The durability of both CoAlPO(4)-5 and prepared CeO(2) is considered to be fair.     

印染废水混凝脱色技术的分子结构基础

印染废水的混凝脱色效果取决于染料分子的分子结构及其在水中的分子分散状态和染料的染色机制。大量研究结果表明，所选用的染料分子的分子结构决定了印染废水混凝脱色技术的混凝机制和混凝效果，合成絮凝剂与选择絮凝剂应充分考虑染料分子的分子结构与空间构型。     

大量三价铬中微量六价铬的分离和测定

研究了大量 Cr( )中微量 Cr( )的分离和测定方法 ,该方法灵敏度高 ,干扰少 ,摩尔吸光系数为 1.6× 10 5L /( m ol·cm )。最佳线性范围 0～ 1.0 m g/L ,检出限为 0 .0 0 2 m g/L。     

球团竖炉烟尘除尘脱硫净化技术设备

本文介绍了球团竖炉的烟尘排放特性 ,分析了烟尘回收效益及脱硫、除尘、除雾一体化技术设备 ,该技术设备是一种紧凑合理、高效耐用、性价比高、管理方便、适合国情的大气环境净化技术设备     

生态农业园区废弃物资源化处理利用研究

本文介绍了蟹岛生态园区农业废气物及生活污水的资源化处理工艺方案 ,通过对沼气池和生活污水厌氧 -好氧 -生态塘处理系统进行综合设计 ,实现了节能环保和废弃物无害化综合处理利用。形成了种植业、养殖业、肥料加工、能源利用和休闲度假有机结合的生态农业经济 ,为实现农村经济可持续发展提供了一种新模式