An integrated assessment method of urban drainage system:A case study in Shenzhen City,China

In recent years, the urban drainage system in China is facing the dual pressure of renovation and construction. This requires that the integrated assessment for the planning and operation of the urban drainage system is obligatory. To evaluate the urban drainage system, an integrated assessment methodology based on the analytic hierarchy process (AHP), integrated simulation, and fuzzy assessment is established. This method is a multi-criteria decision adding app roach to the assessment of the urban drainage system comprehensively. Through the integration of the Storm Water Management Model (SWMM), a simple wastewater treatment plant model, and a surface water quality model, an integrated modelling system for the urban drainage system is developed and applied as a key tool for assessment. Using the established method, a case study in Shenzhen City has been implemented to evaluate and compare two urban drainage system reno vation plans, the distributed plan and the centralized plan. Because of the particularity of this case study, the established method is not applied entirely. Considering the water environ mental impact, ecological impact, technological feasibility, and economic cost, the integrated performance of the distri buted plan is better. As shown in this case study, the proposed method is found to be both effective and practical.     

近40年湖南冰雹时空分布和变化特征及机理分析

利用湖南省1967～2006年近四十年冰雹日数资料,分析了湖南冰雹时空分布特征,着重讨论了湖南冰雹日数年代、年、季、月、旬、日际变化、地域分布特征及湖南前后二十年冰雹的变化趋势。研究表明：湖南冰雹是典型的春雹区,春季冰雹日数占全年冰雹日数的74．9％;存在2年和4．8年的周期;日变化十分明显,多出现在午后到傍晚;地理分布呈西多东少,高山多于平原,洞庭湖北侧多于南侧的特点;近二十年冰雹呈减少趋势,多雹区更集中,主要出现在湘西北和湘东南。     

沙漠油田开发生态环境保护的实践

文章阐述了地处沙漠腹地的石西油田在开发建设过程中开展环境保护工作的具体做法,从加强组织领导、制定并不断完善环保规章制度、加大科技投入等方面分析总结了在沙漠油田中开展环境保护的管理经验,通过加强井场作业、油气集输、建设用地管理、植物种植管理方面的措施,阐述了在沙漠油田开发建设中创建绿色油气田活动所取得的成绩。     

海洋溢油污染的生态与健康危害

随着溢油事故的频繁发生,海洋溢油污染备受关注.本文在阐述国内外海洋溢油污染现状的基础上,针对溢油污染对人类健康的影响进行了初步分析,并针对海洋环境中溢油的环境行为以及对海洋生态系统、沿岸滩涂生态系统的毒性效应进行了概述.最后,对海洋溢油污染研究的发展趋势进行了展望.     

Occurrence, distribution, and source of polybrominated diphenyl ethers in soil and leaves from Shenzhen Special Economic Zone, China

Polybrominated diphenyl ethers (PBDEs) were measured in soil and three plant species samples taken at different land use areas in Shenzhen China. The concentrations of ??₇BDEs (BDE-28, BDE-47, BDE-99, BDE-100, BDE-153, BDE-154, and BDE-183) and BDE-209 in the surface soils ranged from 0.23 to 271 and 8.9 to 5,956 ng/g dry weight (dw), respectively. These figures are comparable to that in the soils of electronic waste dismantling sites. BDE-209 was the predominant congener (contributes 85?C99% of ??₈PBDEs (??₇PBDEs plus BDE-209)) in soils. The regression slopes of total organic carbon and individual BDE congeners were rather gentle, indicating that factors other than soil organic matter regulated the soil concentrations. Proximity to sources of deposition processes might be the major factors. In the plant leaves, ??₇BDEs and BDE-209 concentrations ranged from 1.29 to 5.91 and 5.49 to 28.2 ng/g dw, respectively. BDE-209 is also the dominant component, but the contribution was much lower compared with that in soils. Bauhinia purpurea Linn. and Michelia alba DC. show some similarities on the uptake of PBDEs, while Ficus microcarpa var. pusillifolia is different from them. The correlations between plant leaf concentrations and predicted gaseous concentrations were moderate, indicating that gaseous concentration did not influence the leaf concentration significantly.     

Quantification of energy related industrial eco-efficiency of China

Improving eco-efficiency is propitious for saving resources and reducing emissions, and has become a popular route to sustainable development. We define two energy-related eco-efficiencies: energy efficiency (ENE) and greenhouse gas (GHG) emission-related eco-efficiency (GEE) using energy consumption and the associated GHG emissions as the environmental impacts. Using statistical data, we analyze China??s energy consumption and GHG emissions by industrial subsystem and sector, and estimate the ENE and GEE values for China in 2007 as 4.871×10⁷ US$/PJ and 4.26×10⁸ US$/TgCO₂eq, respectively. Industry is the primary contributing subsystem of China??s economy, contributing 45.2% to the total economic production, using 79.6% of the energy consumed, and generating 91.4% of the total GHG emissions. We distinguish the individual contributions of the 39 industrial sectors to the national economy, overall energy consumption, and GHG emissions, and estimate their energyrelated eco-efficiencies. The results show that although ferrous metal production contributes only 3.5% to the national industrial economy, it consumes the most industrial energy (20% of total), contributes 16% to the total industrial global warming potential (GWP), and ranks third in GHG emissions. The power and heat sector ranks first in GHG emissions and contributes one-third of the total industrial GWP, although it only consumes about 8% of total industrial energy and, like ferrous metal production, contributes 3.5% to the national economy. The ENE of the ferrous metal and power and heat sectors are only 8 and 2.1×10⁷ US$/PJ, while the GEE for these two sectors are 9 and 4×10⁴ US$/GgCO₂eq, respectively; these are nearly the lowest ENE and GEE values among all 39 industry sectors. Finally, we discuss the possibility of ecoefficiency improvement through a comparison with other countries.     

Incidence of organochlorine pesticides in soils of Shenzhen, China

To determine the incidence of organochlorine pesticides (OCPs) in soil in a rapid urbanization region, soil samples from various land use types in Shenzhen were collected in winter, 2007. The concentration of dichlorodiphenyltrichloroethanes (DDTs) and hexachlorocyclohexanes (HCHs) ranged from non-detected to 149 ng g(-1) and 19 to 88 ng g(-1), respectively. The highest levels of OCPs were observed in soil from traffic and industry areas, reflecting that intensive human disturbance make the soil pollution accumulation more disperse. HCHs and DDTs profiles revealed that the sources were associated mainly with lindane and technical DDTs, respectively, while HCHs in the soil of Shenzhen might originate from both recent and historical sources. The loss of OCPs by soil erosion will enter surface runoff and impose impact on the water environment. Non-dietary exposure estimation indicates that children were the most sensitive group. The average daily exposure to OCPs for males was more serious than for females. Non-dietary exposure to DDTs and HCHs in residential blocks of Shenzhen were far below the acceptable daily intake recommended by the Food and Agriculture Organization/World Health Organization.     

Short-range transport of contaminants released from e-waste recycling site in South China

The transport behaviors of a suite of contaminants released from electronic waste (e-waste) recycling operations, including polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), and heavy metals, were evaluated by analyzing the contaminant residues in surface soils sampled in the surrounding area of an e-waste recycling site in South China. Concentrations of PBDEs and PCBs in the soil samples ranged from 0.565 to 2908 ng g(-1) dw and from 0.267 to 1891 ng g(-1) dw, respectively, while soil residues were 0.082-2.56, 3.22-287, and 16.3-162 μg g(-1) dw for Cd, Cu, and Pb, respectively. Concentrations of PBDEs and PCBs in soil decreased with increasing distance from the source of pollution, indicating possible PBDE and PCB contamination in the surrounding areas due to the short-range transport of these compounds from the e-waste recycling site. Although no significant difference in the short-range transport potential among PBDE and PCB congeners was observed, reductions in concentrations of the highly-brominated-BDEs and highly-chlorinated-CBs were slightly quicker than those of their less-halogen-substituted counterparts. Conversely, heavy metals showed the lowest transport potential due to their low vapor pressure, and results showed metals would remain near the pollution source instead of diffusing into the surrounding areas. Finally, mass inventories in areas near the e-waste site were 0.920, 0.134, 0.860, 4.68, 757, and 673 tons for BDE209, PBDEs (excluding BDE209), PCBs, Cd, Cu, and Pb, respectively.     

Fate estimation of polycyclic aromatic hydrocarbons in soils in a rapid urbanization region, Shenzhen of China

Our previous study indicated that the current level of polycyclic aromatic hydrocarbons (PAHs) in Shenzhen soil is in the low-end of world soil PAH pollution. In this study, the fate of PAHs in the soil of Shenzhen was investigated. The mass inventories of Σ(27)PAHs and Σ(15)PAHs (defined as the sum of the 27 or 15 PAH compounds sought) in topsoil of Shenzhen were ～204 and ～152 metric tons, respectively. Fate estimation of Σ(15)PAHs shows that air-soil gaseous exchange is the primary environmental process with ～10,076 kg/year diffusing from soil to air. Rain washing (～1131 kg/year from air to soil) is the most important input pathway followed by wet (～17 kg/year) and dry deposition (～8 kg/year) to soils in Shenzhen. The transport of Σ(15)PAHs by soil erosion is a crucial loss process for soil PAHs in Shenzhen (1918 kg/year for water runoff and 657 kg/year for solid runoff from soil). Moreover, degradation is not ignorable at present (95 kg/year). Comparison of inventory and residue (defined as Σ(15)PAHs left in topsoils after all environmental loss processes) suggested that input and loss of high molecular weight PAHs for Shenzhen's soil reached apparent equilibrium. Soil PAH pollution in Shenzhen will stay in a quasi-steady state for a long period and the natural environmental processes can not significantly reduce the pollution.     

A review of gas-phase chemical mechanisms commonly used in atmospheric chemistry modelling

The atmospheric chemical mechanism is an essential component of airshed models used for investigating the chemical behaviors and impacts of species. Since the first tropospheric chemical mechanism was proposed in the 1960s, various mechanisms including Master Chemical Mechanism (MCM), Carbon Bond Mechanism (CBM), Statewide Air Pollution Research Center (SAPRC) and Regional Atmospheric Chemistry Mechanism (RACM) have been developed for different research purposes. This work summarizes the development and applications of these mechanisms, introduces their compositions and lumping methods, and compares the ways the mechanisms treat radicals with box model simulations. CBM can reproduce urban pollution events with relatively low cost compared to SAPRC and RACM, whereas the chemical behaviors of radicals and the photochemical production of ozone are described in detail in RACM. The photolysis rates of some oxygenated compounds are low in SAPRC07, which may result in underestimation of radical levels. As an explicit chemical mechanism, MCM describes the chemical processes of primary pollutants and their oxidation products in detail. MCM can be used to investigate certain chemical processes; however, due to its large size, it is rarely used in regional model simulations. A box model case study showed that the chemical behavior of OH and HO₂ radicals and the production of ozone were well described by all mechanisms. CBM and SAPRC underestimated the radical levels for different chemical treatments, leading to low ozone production values in both cases. MCM and RACM are widely used in box model studies, while CBM and SAPRC are often selected in regional simulations.