流域社会经济与水环境质量耦合协调度分析

从经济发展、社会发展、环境保护等方面构建耦合协调评价指标体系,采用熵权法确定指标权重,利用力学平衡模型,对闽江流域各个地区2006~2016年耦合协调程度进行评估.结果表明：三明、南平、福州市的经济发展水平、社会发展水平、环境保护水平总体上均呈现逐年递增的趋势,在空间上大体表现为福州 > 三明 >≈南平.三明、南平、福州等地区的耦合协调度总体上呈现递增趋势,在空间上表现为福州>三明≈南平.从时间变化看,可以将闽江流域耦合协调度划分成3个阶段：阶段I （2006~2009年）、阶段Ⅱ （2009~2013年）、阶段Ⅲ （2013~2016年）.根据闽江流域各地区耦合协调度偏离方向θ的大小,将闽江流域各地区不同年限的耦合协调发展划分为环境保护滞后型（I象限）、经济发展滞后型（Ⅱ象限）、社会发展滞后型（Ⅲ象限）,并对不同滞后类型分别提出改进方向.     

基于Monte Carlo模拟的河流水质评价——以温瑞塘河为例

基于水质评价的综合污染指数（CWQI）法和水质指标实测含量的统计分析,应用Monte Carlo模拟方法,建立了河流水质评价的Monte Carlo-CWQI耦合模型并进行实例研究.通过建立的耦合模型和温瑞塘河流域14个监测断面2004~2010年的水质监测数据,定量分析各监测断面隶属于不同污染等级的概率水平和各水质指标对水体污染的影响程度.结果表明：温瑞塘河水系水质污染十分严重,勤奋、九山、东水厂、十字河、南白象、灰桥、新桥、米筛桥、仙门、光明、郭溪、瞿溪、西岙和梧田监测断面处于重度污染的概率分别为28.50%,0.55%,92.71%,59.73%,78.85%,39.38%,78.87%,83.09%,65.32%,78.08%,0.00%,0.96%,68.09%,86.06%;处于严重污染的概率分别为71.28%,0.01%,4.33%,39.76%,21.07%,60.59%,4.42%,12.41%,11.02%,21.24%,0.00%,0.02%,1.42%,13.12%.各监测断面总氮（TN）,氨氮（NH₃-N）和溶解氧（DO）的Spearman等级相关系数范围分别是0.41~0.76、0.25~0.63和0.14~0.66,是其他指标的2倍以上,表明影响该地区水质达标的主要因子是TN,NH₃-N和DO.本研究拓宽了河流水质评价的研究视角,能够为流域水环境管理提供丰富的决策依据.     

滇西北剑湖沉积物钒空间分布特征和生态风险

用电感耦合等离子体发射光谱仪（ICP-OES）测定剑湖表层及柱状沉积物钒（V）含量,采用改进BCR连续提取法提取V各形态,并对V空间分布特征和生态风险进行了分析,揭示了粒度对剑湖沉积物V及形态含量的影响.结果表明,剑湖表层沉积物和柱状沉积物颗粒均以粉砂粒和细砂为主,细颗粒V含量更高.表层沉积物V含量为（117.82±63.31）mg/kg,其水平空间分布差异较大.V可交换态、可还原态、可氧化态和残渣态含量分别为（8.91±8.91）,（18.36±10.53）,（7.67±7.67）,（80.22±58.71）mg/kg,主要以残渣态形式存在,且黏粒和粉砂粒对V可还原态和残渣态影响较大.V垂直分布差异大,底层V含量高于表层,少部分区域受黏粒和粉砂粒影响.剑湖沉积物V污染程度小,大部分地区潜在生态风险较低,底层沉积物污染程度和潜在生态风险都高于表层.     

2015年冬季京津冀两次重污染天气过程气象成因

为了分析京津冀地区2015年11月27日~12月1日和12月19日~25日这2次重污染过程,从环流形势、大气稳定度条件、动力条件、水汽条件、近地层风场输送等几个方面对重污染天气的形成机制展开分析,结果表明：这2次重污染天气过程均属于静稳型,津京冀各地重度以上污染时长均超过50%.在大范围静稳形势存在时,过程一期间边界层内的垂直扩散条件较过程二偏弱,过程一期间地面辐合线位置偏北且维持不动,过程二期间辐合线位置偏南且略微南北摆动,导致了2次过程重污染区域和污染增长速率的不同.对北京而言,过程一前期降雪融化提供了有利水汽条件,弱偏南风有利于污染物和水汽的输送,混合层高度持续异常偏低（京津冀平均混合层高度339m）、过程期间伴随弱下沉运动（0~2Pa/s）、多层逆温（且厚度大）造成日变化不明显,地面辐合线在北京中部维持等多重因素,使得污染浓度极高,北京地区PM_2.5峰值浓度达593mg/m³.过程二前期采取了减排措施,能见度和PM_2.5日变化大、污染发展较过程一前期平缓;后期不利气象条件叠加污染排放,导致了PM_2.5爆发式增长,其中邢台PM_2.5峰值浓度达70mg/m³,增长率超过7.2mg/（m³·h）.     

新时代中国乡村振兴：探索与思考——乡村地理青年学者笔谈

乡村振兴是新时期国家重大战略,是一项系统工程。中国地域广阔,资源禀赋和经济发展区域差异显著,乡村振兴路径需要体现乡村发展的综合性、复杂性和区域性。来自乡村地理学领域的16位青年学者,以笔谈方式,对中国乡村振兴的科学路径开展了深入讨论。核心观点如下：（1）乡村振兴需要遵循时空分异规律,重点关注乡村发展的时空传承与现实需求之间的衔接,建立彰显地域特色和具有可操行性的理论和技术体系,分类、有序地推进乡村的人居环境、产业体系、生态环境和治理模式等转型。（2）力求城乡融合和联动,构建城乡复合多中心网络体系,创新采用“乡村群”空间组织模式,以乡村内生力、城镇辐射力与规划约束力共同驱动乡村振兴。（3）在中国“大国小农”的基本国情下,农业承载着食品安全、社会稳定和生态产品等多重功能,需要构建农业“全价值链”的发展路径,促进一二三产业深度融合,助力乡村产业兴旺。（4）在能源富集区,在保障国家能源安全需求前提下,需从根本上解决农村发展不平衡不充分问题;在西南地区,依托山区特色生态、人文资源打造山区现代农业产业体系、重塑乡村旅游新品牌、构筑山水田园乡村家园;在东北地区,乡村振兴应与“东北振兴”战略协同推进,有序分类推进;在长三角地区,应在全面认知乡村工业化到乡村城镇化,再到乡村特色化,到乡村的社会、文化和生态建设的阶段演化特征基础上,寻求差异化的乡村振兴路径;在西北地区,应在生态保护的前提下有效提升乡村“自主脱贫”的能力,实现从“输血”扶贫向“造血”扶贫转变;在京津冀地区,需以城乡基本公共服务均等化为目标,推动城乡融合与乡村振兴;在资源型地区,乡村振兴核心将以一二三产业融合的高效农业体系替代以资源开采为核心的产业体系;在传统农区,优化耕地利用转型同农村劳动力结构变化的耦合格局是实现乡村振兴的关键;在经济发达地区,具有“混杂性”特征的乡村,需激活农村土地资源的资产和资本属性,推进空间有序整合与活化,寻求多主体共同参与和缔造的现代乡村治理模式。     

内蒙古气温变暖停滞对其影响因子变化的响应

采用中心聚类、M-K检验等方法,以内蒙古地区为例,利用全球Pacific Decadal Oscillation（PDO）、Multivariate ENSO Index（MEI）等大空间尺度数据以及内蒙古及其周边70个气象站1951~2016年平均最低气温、平均气温、平均最高气温、风速、大气压等站点数据,定性、定量揭示变暖停滞的变化特征及其对影响因子变化的响应.结果表明：研究区各分区3类气温在1981~1993年间发生升温突变,此后1998~2008年间陆续发生变暖停滞.不同类型气温在不同分区与各影响因子的相关性优劣有所不同,如平均最低气温与AMO、PDO、MEI、太阳总辐射、风速、大气压的相关性最好,平均气温次之,平均最高气温最差;西部区气温与AMO、PDO、MEI、太阳总辐射相关性较好,中部区气温则与AMO、风速相关性较好等.整体上,1990s~2000s,随各分区AMO上升驱缓、PDO处于正位相阶段但呈下降趋势或处于负位相时、MEI值与太阳总辐射下降、风速、大气压、相对湿度的持续下降/上升及之后的趋势转变,各分区气温发生变暖停滞,如当AMO开始整体进入上升趋缓阶段,风速持续减小8~13a,倾向率达到-0.26~-0.11m/（s·10a）时,平均气温发生变暖停滞.平均最低气温对3类影响因子变化的响应最敏感,平均气温次之.气温变暖停滞是多种影响因子共同作用的结果.本研究丰富了该方面研究成果,对气候变化研究及防灾减灾等有一定借鉴意义.     

Application of interface material and effects of oxygen gradient on the performance of single-chamber sediment microbial fuel cells (SSMFCs)

Single-chamber sediment microbial fuel cells(SSMFCs) have received considerable attention nowadays because of their unique dual-functionality of power generation and enhancement of wastewater treatment performance. Thus, scaling up or upgrading SSMFCs for enhanced and efficient performance is a highly crucial task. Therefore, in order to achieve this goal, an innovative physical technique of using interface layers with four different pore sizes embedded in the middle of SSMFCs was utilized in this study.Experimental results showed that the performance of SSMFCs employing an interface layer was improved regardless of the pore size of the interface material, compared to those without such layers. The use of an interface layer resulted in a positive and significant effect on the performance of SSMFCs because of the effective prevention of oxygen diffusion from the cathode to the anode. Nevertheless, when a smaller pore size interface was utilized, better power performance and COD degradation were observed. A maximum power density of 0.032 mW/m~2 and COD degradation of 47.3% were obtained in the case of an interface pore size of 0.28 μm. The findings in this study are of significance to promote the future practical application of SSMFCs in wastewater treatment plants.     

One-step synthesis of Cu(II) metal–organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(Ⅱ)-based metal–organic gel(Cu-MOG) with a nanoporous 3 D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.     

Effect of air masses motion on the rapid change of aerosols in marine atmosphere

The impact of air masses motion on marine aerosol properties was investigated using an on-board single particle mass spectrometer(SPAMS) deployed for the determination of single particle size resolved chemical composition over Southeast China Sea. Two aerosol blooms(E1 and E2) were observed during the cruise. High average particle number count occurred in E1(7320), followed by E2(5850), which was more than 100–150 times of the average particle number count during normal periods. Particles were classified as four major sources, including continental source, shipping source, marine source, and transport source based on the mass spectral similarity. Transport source was identified as those particles with high particle number count occurred only during aerosol bloom period. Three sub-types of EC-Ca, OC-Ca, and Al-rich were classified as transport source.EC-Ca was the dominant particles of the transport source, accounting for more than 70%of the total particles in aerosol bloom events. A uni-modal size distribution in the size range of 0.1–2.0 μm was observed during normal period, while a bimodal distribution with a tiny mode(0.3 μm) and a coarse mode between 0.4 and 0.6 μm was present during aerosol bloom. The variation of aerosol source is consistent with air masses back trajectories, for the reason that most of the long-range air trajectories are from the ocean,while short air trajectories originate in the continental regions, which means that air masses have a significant impact on the aerosol physical–chemical properties along their tracks.     

干湿交替频率对有机涂层失效过程的影响

目的研究干湿交替频率对有机涂层失效过程的影响。方法应用电化学阻抗谱技术,结合浸泡过程中涂层表面以及基底金属的形貌变化,对比研究高频率干湿交替环境和低频率干湿交替环境下,浸泡初期、浸泡中期、浸泡末期有机涂层的失效过程及特征。结果高频率干湿交替环境下,涂层在浸泡初期、中期、末期所经历的时长分别为13、2、5d,而低频干湿交替环境下,涂层在浸泡初期、中期、末期所经历的时长分别为18、4、46 d。对比来看,高频率干湿交替显著缩短了浸泡后期的时长,加速涂层失效过程。此外,高频干湿交替使涂层起泡位置分布均匀,基底金属均匀腐蚀,这与低频干湿交替环境恰好相反。结论高频率干湿交替环境下,涂层失效较快,涂层剥离及基底金属腐蚀较均匀。