Biodegradation of benzene, toluene; and other aromatic compounds by Pseudmonas sp. D8

Pseudmonas sp. D8 strain, which has the potential to utilize toluene as a sole carbon source, was isolated. At a concentration of 100 mg/l, this strain was found to efficiently degrade toluene and benzene (both individually and in mixture) in culture medium at 30°C and pH7. Following a two-hour lag phase, complete biodegradation of 100 mg/l toluene or benzene occurred within 6 to 8 hours. The addition of nitrate, phosphate, or sulfate at various concentrations were found to have significant influence on both toluene and benzene degradation. In addition, results show that the D8 strain has the ability to degrade monochlorophenols, nitrophenols, and phenol, but not aliphatic compounds. Inoculation of groundwater samples containing 100 mg/1 toluene or benzene with Pseudmonas sp. D8 resulted in rapid degradation within 24 33 hours.     

Determination of polycyclic musks in sewage sludge from Guangdong, China using GC-EI-MS

Polycyclic musks [Cashmeran (DPMI), Celestolide (ADBI), Phantolide (AHMI), Traseolide (ATII), Tonalide (AHTN) and Galaxolide (HHCB)] were Soxhlet extracted, separated and analyzed in sewage sludge from six different wastewater treatment plants from Guangdong, China, using GC and GC-EI-MS. DPMI, ADBI, HHCB, AHTN were found in all samples, and ATII was not found in any sample. AHMI was detected in five out of six samples. HHCB and AHTN were the two major polycyclic musks found in highest concentrations in sludge. The sludge from municipal wastewater treatment plants contained HHCB, AHTN and DPMI at concentrations between 5.416 and 21.214, 0.715 and 6.195 and 0.599 and 2.870 mg/kg (dry), respectively. The highest concentration was found in sludge from one cosmetic plant at 703.681 mg HHCB/kg (dry). The results indicate that there are two sources of polycyclic musks: domestic sewage and industrial wastewater.     

Gas- and particulate-phase specific tracer and toxic organic compounds in environmental tobacco smoke

Cigarette smoke constituents are worthy of concern and characterized as carcinogens. Different experiment conditions may affect the environmental tobacco smoke (ETS) constituents. A study was undertaken in a 75.5-m3 spare office to evaluate ETS constituents in a real environment. Thirty-four volatile organic compounds (VOCs) including three ETS tracers: nicotine, 2,5-dimethylfuran and 3-ethenylpyridine (3-EP), 19 carbonyl compounds, 54 semi-volatile compounds (24 polycyclic aromatic hydrocarbons (PAHs) and 30 alkanes) as well as CO and total particulate matter (TPM) from 15 leading commercial brands were determined. ETS constituents did not increase with increasing cigarette tar. ETS tracers nicotine and 3-EP were affected greatly due to more sorption and surface reactions in real world compared to other studies conducted in chamber, which resulted in 2-5 times lower. Benzene, toluene, ethylbenzene, xylenes, acrolein, 2-butanone and the high molecular weight compounds exhibited little affect. Pearson correlation analyses show that gas-phase and particulate-phase ETS tracers did not show significant correlation, but within each homologue many of compounds correlated significantly. Indole and cholesta-3,5-diene were also detected in ETS. These results may be useful in efforts to better understand the health effect of ETS exposure and source apportionment.     

Bio-oxidation of airborne volatile organic compounds in an activated sludge aeration tank

An activated sludge aeration tank (40 x 40 x 300 cm, width x length x height) with a set of 2-mm orifice air spargers was used to treat gas-borne volatile organic compounds (VOCs; toluene, p-xylene, and dichloromethane) in air streams. The effects of liquid depth (Z), aeration intensity (G/A), the overall mass-transfer rate of oxygen in clean water (KLaO2), the Henry's law constant of the tested VOC (H), and the influent gaseous VOC concentration (C0) on the efficiency of removal of VOCs were examined and compared with a literature-cited model. Results show that the measured VOC removal efficiencies and those predicted by the model were comparable at a G/A of 3.75-11.25 m3/m2 hr and C0 of approximately 1000-6000 mg/m3. Experimental data also indicated that the designed gas treatment reactor with KLaO2 = 5-15 hr(-l) could achieve > 85% removal of VOCs with H = 0.24-0.25 at an aerated liquid depth of 1 m and > 95% removal of dichloromethane with H = 0.13 at a 1-m liquid depth.     

Interactive analysis of waste recycling and energy recovery program in a small-scale incinerator

Conflicting goals affecting solid waste management are explored in this paper to find the best implementation of resource recovery with a small-scale waste-to-energy process. Recycling paper and plastic material often leaves a shortage of thermal energy to support incineration that forces operators to supplement the process with auxiliary fuels. Although there are considerable profits to be made from material recovery, the increase of fuel usage causes conflict given that it is cost prohibitive. A series of trials performed on a small-scale 1.5-t/day incineration plant with a cyclone heat recovery system found that material recycling can impede performance. Experimental results are expressed as empirical regression formulas with regard to combustion temperature, energy transfer, and heat recovery. Process optimization is possible if the waste moisture content remains <30%. To test the robustness of the optimization analysis, a series of sensitivity analyses clarify the extent of material recycling needed with regard to plastic, paper, and metal. The experiments also test whether the moisture in the waste would decrease when recycling paper because of its exceptional capacity to absorb moisture. Results show that recycling paper is strongly recommended when the moisture content is >20%, whereas plastic recycling is not necessary at that moisture condition. Notably, plastic recovery reduces the heat needed to vaporize the water content of the solid waste, thus it is recommended only when the moisture content is <10%. For above-normal incineration temperatures, plastic recycling is encouraged, because it removes excess energy. Metal is confirmed as an overall priority in material recycling regardless of the moisture content of the incoming waste.     

酸性媒介黄GG生物降解性能的试验研究

通过试验研究酸性媒介黄GG染料在厌氧、好氧条件下的生物降解机理、降解能力及共代谢降解效果.试验结果表明,厌氧菌能够通过葡萄糖共代谢作用很快降解酸性媒介黄GG;而好氧条件下经驯化活性污泥不能降解酸性媒介黄GG,经过较长时间驯化活性污泥能降解酸性媒介黄GG,但降解效果很差.葡萄糖浓度的升高对提高酸性媒介黄GG厌氧生物降解率有利,当葡萄糖浓度为2000 mg/L时,40mg/L酸性媒介黄GG的12和60 h厌氧生物降解率分别达到81.5%和93.5%.酸性媒介黄GG浓度对厌氧菌的生物降解能力也有影响.当葡萄糖浓度为2000 mg/L,酸性媒介黄GG(浓度为20～100 mg/L)的厌氧降解率最好,降解效率达到了94%,说明厌氧菌对酸性媒介黄GG的降解能力较好.     

田湾核电站外围辐射环境监测工作的质量保证

总结了田湾核电站外围辐射环境监测中的质量保证实施情况，包括：人员培训和考核，仪器设备溯源，样品采集、运输、贮存及生物样品前处理的质控，样品分析和现场监测的质控，数据的记录处理和管理要求等，最后提出几点建议。     

生物质型煤成型技术开发实验研究

通过原有成型方式的工业成型观察和模压成型实验，提出并验证了完全利用生物质纤维的交联作用实现成型的新机制。其于中高压下物料的不可再压缩性和单向挤压也会导致更高的成型压力的新认识，设计和研制成按新机制成型的型轮。经此改进的工业成型试验达到了比模压成型更好的效果：不用预实送料，且成型性能；成型压力降至120MPa以下，成型许可水分成倍提高，适合的生物质配比范围15％－60％；仅利用送料螺旋的预实功能，即可实现纯生物质型块的成型。     

PCDDs, PCDFs, and PCBs concentrations in breast milk from two areas in Korea: body burden of mothers and implications for feeding infants

We determined breast milk concentration of polychlorinated dibenzo-p-dioxins (PCDDs)/polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) in 24 mothers living in Korea, and assessed the maternal body burden based on PCDDs/PCDFs and PCBs concentrations in breast milk and an infant intake rate through breast-feeding based on their concentration in breast milk. PCDDs/PCDFs and PCBs levels in breast milk from primipara mothers were found to be higher than those from multipara mothers. For total PCDDs/PCDFs TEQ level, 2,3,4,7,8-PeCDD was the predominant congener, and the proportion of 2,3,7,8-TCDD was less than 3% of total PCDDs/PCDFs TEQ level. For PCBs TEQ level, PCB-126 was the predominant congener. Maternal body burden levels of PCDDs/PCDFs and PCBs based on their concentrations in breast milk were 268-622 TEQ ng. The daily dioxin intakes of mothers were predicted to be 0.78-2.18 TEQ pg/kg/day for PCDDs/PCDFs and 0.34-0.66 TEQ pg/kg/ day for PCBs. For the first year, the body burden of an infant was predicted to be 212 TEQ ng and the daily intake of an infant was predicted to be 85 TEQ pg/kg/day, assuming the mean dioxin-related compounds concentration (27.54 TEQ pg/g fat).     

Transport modeling of copper and cadmium with linear and nonlinear retardation factors

The predictive accuracy of using the one-dimensional advection–dispersion equation to evaluate the fate and transport of solute in a soil column is usually dependent on the proper determination of chemical retardation factors. Typically, the distribution coefficient (K_d) obtained by fitting the linear sorption isotherm has been extensively used to consider general geochemical reactions on solute transport in a low-concentration range. However, the linear distribution coefficient cannot be adequately utilized to describe the solute fate at a higher concentration level. This study employed the nonlinear equilibrium-controlled sorption parameters to determine the retardation factor used in column leaching experiments. Copper and cadmium transportation in a lateritic silty-clay soil column was examined. Through the explicit finite-difference calculations with a third-order total-variation-diminishing (TVD) numerical solution scheme, all results of the theoretical copper and cadmium breakthrough curves (BTCs) simulated by using the Freundlich nonlinear retardation factors revealed good agreement with the experimental observations.