Repeatability of physiological traits in juvenile Pacific abalone, Haliotis discus hannai

Several studies on individual physiological traits assume that past records may predict future performance. Marine mollusks, as other animals, show a wide range of between- and within-individual variation of physiological traits. However, in this group, almost nothing is known about the relative influence of genetic factors on that variation. Repeatability (R) is a measure of the consistency of the variation of a trait, which includes its genetic variance and represents the maximum potential value of its heritability (h ²). Traits that show high inter-individual variation and high repeatability levels could potentially evolve through selection (natural or artificial). We estimated the repeatability [using intra-class (τ) and Pearson-moment (r) correlation coefficients] of several physiological traits related to energy acquisition and allocation in juvenile Pacific abalone Haliotis discus hannai, maintained under controlled environment growing systems. In order to estimate the range of the R values and the effect of the time elapsed between measurements on these estimates, we measured these traits monthly during 6 months for each individual. Among the physiological traits, those related to energy allocation like oxygen consumption (standard metabolic rate, SMR) and ammonium excretion rates, and oxygen/nitrogen ratio (O/N), showed intermediate levels of repeatability (0.48, 0.55 and 0.39, respectively), when this was estimated by τ coefficient. However, the r estimation showed that SMR and O/N repeatability were significant and high (0.6–0.7 and 0.5–0.7, respectively) during the first 5 consecutive measurements, decreasing strongly (0.3 and 0.2, respectively) during the last measurement. For ammonia excretion, although repeatability (r) decreased from 0.8 to 0.5 during the 6 consecutive measurements, they remain significant during the experimental period. Therefore, our results indicate that for H. discus hannai juveniles, physiological traits like SMR, ammonia excretion and O/N are significantly repeatable (i.e. good predictors of future measurements) during a period of 4–5 months. These significant repeatability values suggest an important genetic control upon the phenotypic variation of these physiological traits, and could potentially respond to natural or artificial selection, and be used in genetic improvement programs. By contrast, those traits related to energy acquisition (i.e. ingestion, absorption and assimilation) and physiological efficiencies (i.e. net growth and scope for growth) showed very low levels of repeatability (0–0.07). This indicates that the phenotypic variation of these traits would be more influenced by environment rather than by genetic factors.     

Brazilian free-tailed bats as insect pest regulators in transgenic and conventional cotton crops.

During the past 12000 years agricultural systems have transitioned from natural habitats to conventional agricultural regions and recently to large areas of genetically engineered (GE) croplands. This GE revolution occurred for cotton in a span of slightly more than a decade during which a switch occurred in major cotton production areas from growing 100% conventional cotton to an environment in which 95% transgenics are grown. Ecological interactions between GE targeted insects and other insectivorous insects have been investigated. However, the relationships between ecological functions (such as herbivory and ecosystem transport) and agronomic benefits of avian or mammalian insectivores in the transgenic environment generally remain unclear, although the importance of some agricultural pest management services provided by insectivorous species such as the Brazilian free-tailed bat, Tadarida brasiliensis, have been recognized. We developed a dynamic model to predict regional-scale ecological functions in agricultural food webs by using the indicators of insect pest herbivory measured by cotton boll damage and insect emigration from cotton. In the south-central Texas Winter Garden agricultural region we find that the process of insectivory by bats has a considerable impact on both the ecology and valuation of harvest in Bacillus thuringiensis (Bt) transgenic and nontransgenic cotton crops. Predation on agricultural pests by insectivorous bats may enhance the economic value of agricultural systems by reducing the frequency of required spraying and delaying the ultimate need for new pesticides. In the Winter Garden region, the presence of large numbers of insectivorous bats yields a regional summer dispersion of adult pest insects from Bt cotton that is considerably reduced from the moth emigration when bats are absent in either transgenic or non-transgenic crops. This regional decrease of pest numbers impacts insect herbivory on a transcontinental scale. With a few exceptions, we find that the agronomics of both Bt and conventional cotton production is more profitable when large numbers of insectivorous bats are present.     

Flood Risk Reduction from Agricultural Best Management Practices

Best management practices (BMPs) play an important role in improving impaired water quality from conventional row crop agriculture. In addition to reducing nutrient and sediment loads, BMPs such as fertilizer management, reduced tillage, and cover crops could alter the hydrology of agricultural systems and reduce surface water runoff. While attention is devoted to the water quality benefits of BMPs, the potential co‐benefits of flood loss reduction are often overlooked. This study quantifies the effects of selected commonly applied BMPs on expected flood loss to agricultural and urban areas in four Iowa watersheds. The analysis combines a watershed hydrologic model, hydraulic model outputs, and a loss estimation model to determine relationships between hydrologic changes from BMP implementations and annual economic flood loss. The results indicate a modest reduction in peak discharge and economic loss, although loss reduction is substantial when urban centers or other high‐value assets are located downstream in the watershed. Among the BMPs, wetlands, and cover crops reduce losses the most. The research demonstrates that watershed‐scale implementation of agricultural BMPs could provide benefits of flood loss reduction in addition to water quality improvements.     

Remote sensing water observation for supporting Lake Victoria weed management

This paper aims to assess the suitability of remote sensing for enhancing the management of water body resources and for providing an inexpensive way to gather, on a wide area, weed infestation extent and optical parameter linked to the water body status. Remotely sensed satellite images and ancillary ground true data were used to produce land cover maps, trough classification techniques, and water compounds maps, applying radiative transfer models. The study proposed within the framework of the cooperation between Italian Foreign Affair Ministry (through the University of Rome) and Kenyan Authorities has been carried out on the Kenyan part of the Lake Victoria. This lake is one of the largest freshwater bodies of the world where, over the last few years environmental challenges and human impact have perturbed the ecological balance affecting the biodiversity. The objective of this research study is to define the thematic products, retrievable from satellite images, like weed abundance maps and water compound concentrations. These products, if provided with an appropriate time frequency, are useful to identify the preconditions for the occurrence of hazard events like abnormal macrophyte proliferation and to develop an up-to-date decision support system devoted to an apprised territory, environment and resource management.     

The effect of EURO-0 vehicle substitution on polycyclic aromatic hydrocarbon and carbon monoxide concentrations in an urban area

From 1994 to 2003, daily air concentrations of particle-bound polycyclic aromatic hydrocarbons (PAHs) and carbon monoxide (CO) were regularly monitored at two traffic-oriented sampling sites (A and B) in urban Genoa, Italy. The data were used to estimate effects on air quality in real situations due to progressive substitution of EURO-0 vehicles, started in 1993, with less-polluting vehicles (EURO-1, EURO-2), mainly gasoline vehicles with a catalyst. PAH profile classification and diagnostic PAH ratios were used to identify 345 samples of predominantly traffic origin. At both sites, CO and PAH daily concentrations decreased exponentially with time and the apparent half-life values calculated were 6.3 and 5.5 for CO and 3.7 and 3.5 years for PAHs at sites A and B, respectively. At site A, monitored for traffic intensity, multiple regression analyses confirmed that daily PAH and CO concentrations were positively correlated with the number of non-catalytic vehicles estimated to cross this site during sampling and negatively correlated with seasonal variables (air temperature, ozone concentration, relative air humidity). The reduction in air pollution estimated for complete substitution of non-catalytic gasoline vehicles was 89% for BaP, 85% for total PAHs and 69% for CO.     

Stable carbon isotope ratio in atmospheric CO2 collected by new diffusive devices

In this paper, stable carbon isotope ratios (δ ¹³C) were determined in the atmosphere by using a Ca-based sorbent, CaO/Ca₁₂Al₁₄O₃₃ 75:25 w/w, for passively collecting atmospheric CO₂, in both field and laboratory experiments. Field measurements were conducted in three environments characterized by different carbon dioxide sources. In particular, the environments under consideration were a rather heavily trafficked road, where the source of CO₂ is mostly vehicle exhaust, a rural unpolluted area, and a private kitchen where the major source of CO₂ was gas combustion. Samplers were exposed to the free atmosphere for 3 days in order to allow collection of sufficient CO₂ for δ¹³C analysis, then the collected CO₂ was desorbed from the adsorbent with acid treatment, and directly analyzed by nondispersive infrared (NDIR) instrument. δ ¹³C results confirmed that the samplers collected representative CO₂ samples and no fractionation occurred during passive trapping, as also confirmed by an appositely designed experiment conducted in the laboratory. Passive sampling using CaO/Ca₁₂Al₁₄O₃₃ 75:25 w/w proved to be an easy and reliable method to collect atmospheric carbon dioxide for δ ¹³C analysis in both indoor and outdoor places.     

A new <Emphasis Type="Italic">P. putida</Emphasis> instrumental toxicity bioassay

Here, we present a new toxicity bioassay (CO₂-TOX), able to detect toxic or inhibitory compounds in water samples, based on the quantification of Pseudomonas putida KT2440 CO₂ production. The metabolically produced CO₂ was measured continuously and directly in the liquid assay media, with a potentiometric gas electrode. The optimization studies were performed using as a model toxicant 3,5-DCP (3,5-dichlorophenol); later, heavy metals (Pb²⁺, Cu²⁺, or Zn²⁺) and a metalloid (As⁵⁺) were assayed. The response to toxics was evident after 15 min of incubation and at relatively low concentrations (e.g., 1.1 mg/L of 3,5-DCP), showing that the CO₂-TOX bioassay is fast and sensitive. The EC₅₀ values obtained were 4.93, 0.12, 6.05, 32.17, and 37.81 mg/L for 3,5-DCP, Cu²⁺, Zn²⁺, As⁵⁺, and Pb²⁺, respectively, at neutral pH. Additionally, the effect of the pH of the sample and the use of lyophilized bacteria were also analyzed showing that the bioassay can be implemented in different conditions. Moreover, highly turbid samples and samples with very low oxygen levels were measured successfully with the new instrumental bioassay described here. Finally, simulated samples containing 3,5-DCP or a heavy metal mixture were tested using the proposed bioassay and a standard ISO bioassay, showing that our test is more sensible to the phenol but less sensible to the metal mixtures. Therefore, we propose CO₂-TOX as a rapid, sensitive, low-cost, and robust instrumental bioassay that could perform as an industrial wastewater-process monitor among other applications.