Management of sludge from fish ponds at the edge of the Itaparica Reservoir (Brazil): an alternative to improve agricultural production

Sludge generated in intensively managed tilapia fingerling breeding ponds near the Itaparica Dam in the semi-arid Brazilian northeastern region was tested as a soil conditioner to produce lettuce in an effort to mitigate the present environmental impact of the deposition of this sludge, thereby giving it a productive destiny. A greenhouse experiment was performed by mixing the sludge with a Haplic Planosol topsoil, a characteristic soil of the region, so that the sludge corresponded to 0, 25, 50, 75, and 100% of the mixture (substrate). The experiment was set up as a randomized block design with five blocks, each with three pots (5-kg substrate per pot) of the five sludge proportion treatments. One lettuce plant was transplanted into each pot, maintained under greenhouse conditions, and harvested 35 days after transplanting. Sludge, soil, and the substrates were evaluated for nutrient concentration and physical characteristics. Green and dry weights, stem diameter, and nitrogen, phosphorus, and potassium concentrations in the aboveground parts of the lettuce plants were determined. Sludge incorporation into the substrate improved its chemical and physical characteristics. The lettuce plants grew best in the substrate with 75% sludge, increasing its biomass production by 50% and more than doubling its nitrogen uptake.     

Illumina sequencing-based analysis of a microbial community enriched under anaerobic methane oxidation condition coupled to denitrification revealed coexistence of aerobic and anaerobic methanotrophs

Methane is produced in anaerobic environments, such as reactors used to treat wastewaters, and can be consumed by methanotrophs. The composition and structure of a microbial community enriched from anaerobic sewage sludge under methane-oxidation condition coupled to denitrification were investigated. Denaturing gradient gel electrophoresis (DGGE) analysis retrieved sequences of Methylocaldum and Chloroflexi. Deep sequencing analysis revealed a complex community that changed over time and was affected by methane concentration. Methylocaldum (8.2%), Methylosinus (2.3%), Methylomonas (0.02%), Methylacidiphilales (0.45%), Nitrospirales (0.18%), and Methanosarcinales (0.3%) were detected. Despite denitrifying conditions provided, Nitrospirales and Methanosarcinales, known to perform anaerobic methane oxidation coupled to denitrification (DAMO) process, were in very low abundance. Results demonstrated that aerobic and anaerobic methanotrophs coexisted in the reactor together with heterotrophic microorganisms, suggesting that a diverse microbial community was important to sustain methanotrophic activity. The methanogenic sludge was a good inoculum to enrich methanotrophs, and cultivation conditions play a selective role in determining community composition.     

Are children playgrounds safe play areas? Inorganic analysis and lead isotope ratios for contamination assessment in recreational (Brazilian) parks

Environmental Science and Pollution Research - In city playgrounds, there is a potential risk of harming children’s health by contamination coming from anthropogenic activities. With the aim...     

Heterogeneous alternative catalysts: A bibliometric and systematic evaluation of their application in solar photocatalytic processes

The present study sought to objectively demonstrate how a researcher can, in a structured way, select relevant articles about alternative heterogeneous catalysts in photocatalytic processes. Therefore, the ProKnow-C (Knowledge Development Process – Constructivist) method was used to systematize the results found, with the application bibliometric and systematic analysis techniques for the evaluation of the results. The search string adopted as criteria was: solar photocatalysis AND heterogeneous catalysts OR alternative catalysts AND effluents. The databases were Web of Science, Science Direct and Scopus. The final bibliographic portfolio obtained for the research theme was made up of 19 articles. It was possible to verify advances in the number of publications on the theme over the evaluated period, with the Journal of Photochemistry and Photobiology A: Chemistry standing out in the final portfolio. Evaluating each article in the portfolio individually, it was possible to verify that most studies use combinations of catalysts already reported to create an alternative material to those already investigated in the literature. Those that use waste as catalysts chose to source this material from treatment plants and the steel industry. Around 58% of the papers used hydrogen peroxide in their processes, while 42% chose not to use it. Finally, approximately 63% of the papers in the portfolio used synthetic effluent in their processes, while the rest (37% of the research) chose to use real effluent. The results obtained in this research by applying the method can contribute to studies related to heterogeneous photocatalysis by alternative means over the years.     

Global variability of food waste chemical composition and its consequences on the production of biofuels and chemical compounds

Journal of Material Cycles and Waste Management - The use of food waste (FW) for the production of biofuels and value-added compounds is growing worldwide. However, the significant chemical...     

Mass balance to assess the efficiency of a mechanical-biological treatment

Using mechanical-biological treatment of residual municipal solid waste, it is possible to significantly lower landfill volume and gas and leachate emissions. Moreover, the landfill characteristics are improved. The performance of the Mende (France) mechanical-biological treatment plant is assessed via mass balances coupled with manual sorting according to the MODECOMtrade mark methodology and biochemical methane potential after 90 days of incubation. The site includes mechanical sorting operations, a rotary sequential bioreactor, controlled aerobic stabilisation corridors, maturation platforms, and a sanitary landfill site for waste disposal in separated cells. Results showed that several steps could be improved: after a first sieving step, about 12% of the potentially biodegradable matter is landfilled directly without any treatment; mechanical disintegration of papers and cardboards in the rotary sequential bioreactor is insufficient and leads to a high proportion of papers and cardboards being landfilled without further treatment. Two fine fractions go through stabilisation and maturation steps. At the end of the maturation step, about 54% of the potentially biodegradable matter is degraded. The biochemical methane potential after 90 days of incubation is reduced by 81% for one of the two fine fractions and reduced by 88% for the other one. Considering the whole plant, there is a reduction of nearly 20% DM of the entering residual municipal solid waste.     

Combining TiO2-photocatalysis and wetland reactors for the efficient treatment of pesticides

In the present work the photocatalytic and biological degradation of two commercial mixtures of pesticides (Folimat and Ronstar) and two fungicides (pyrimethanil and triadimenol) has been studied. The evolution of some components of these commercial products (dicofol, tetradifon and oxadiazon) and that of the two fungicides has been monitored by means of HPLC, GC-MS, TOC and toxicity (Lemna minor toxicity test) measurements. The photocatalytic method was able to degrade dicofol, tetradifon, pyrimethanil, triadimenol and the components of Ronstar with the exception of oxadiazon. In addition to this, the photocatalytic method eliminated pyrimethanil toxicity and reduced that of triadimenol by a 90%, Ronstar by a 78% and Folimat by an 87%. Nevertheless, the wetland reactors alone could reduce the toxicity of only the former. Finally, the proper dosage of the water containing the pesticides to a photocatalytic reactor followed by a wetland reactor resulted to be the most successful strategy for the detoxification of the studied compounds and their mixtures.     

Factors and values of willingness to pay for improved construction waste management--a perspective of Malaysian contractors

Malaysia is facing an increase in the generation of waste and of accompanying problems with the disposal of this waste. In the last two decades, extensive building and infrastructure development projects have led to an increase in the generation of construction waste material. The construction industry has a substantial impact on the environment, and its environmental effects are in direct relation to the quality and quantity of the waste it generates. This paper discusses general characteristics of the construction contractors, the contractors' willingness to pay (WTP) for improved construction waste management, determining factors which affect the amount of their willingness to pay, and suggestions and policy implications in the perspective of construction waste management in Malaysia. The data in this study is based on contractors registered with the construction industry development board (CIDB) of Malaysia. Employing the open ended contingent valuation method, the study assessed the contractors' average maximum WTP for improved construction waste management to be RM69.88 (1US$=3.6 RM) per tonne of waste. The result shows that the average maximum WTP is higher for large contractors than for medium and small contractors. The highest average maximum WTP value is RM88.00 for Group A (large contractors) RM78.25 for Group B (medium-size contractors) and RM55.80 for Group C (small contractors). One of the contributions of this study is to highlight the difference of CIDB registration grade in the WTP for improved construction waste management. It is found that contractors' WTP for improved waste collection and disposal services increases with the increase in contractors' current paid up capital. The identified factors and determinants of the WTP will assist the formulation of appropriate policies in addressing the construction waste problem in Malaysia and indirectly improve the quality of construction in the country.     

Quantity and spectroscopic properties of soil dissolved organic matter (DOM) as a function of soil sample treatments: air-drying and pre-incubation

The dissolved organic matter (DOM) in soils is essentially defined by the way in which it is obtained. Therefore, we need to understand as to how pre-treatment of a soil will affect the characteristics of DOM, since this fraction may be strongly influenced by a soil's water content. The effect of two different pre-treatments on DOM from the A-horizons of a large variety of ecosystems and regions were compared. In both cases the soils were allowed to air-dry. In one case the air-dried soil was directly extracted (AD), while in the other case it was preincubated for 1 week at 50% of its water holding capacity (INCU). AD is simpler, but INCU brings the soil, and especially its microbial population, back to a standardised state, which is more representative of the usual state in the field. Both methods are used whenever an adjustment of the soil water content is essential to compare different regions or to eliminate short term weather effects. A significant regression indicated that the dissolved organic carbon (DOC) extracted from INCU samples was only 20% of AD DOC. Both the absorptivity (UV absorption divided by DOC) of 86% of the samples, and a fluorescence emission spectrum based Humification Index in all cases increased as a result of preincubation. This would indicate that labile compounds released during drying were metabolised during the incubation. However, the magnitude of this increase varied, and no correlation with soil organic and microbial carbon, pH, or texture could be detected. The results show that DOM extracted from AD and INCU soils is not comparable and that the differences are mainly due to the impact of air-drying on the microbial activity.     

Virological Characterization of Roof-Harvested Rainwater of Densely Urbanized Low-Income Region

Food and Environmental Virology - Roof-harvested rainwater (RHRW) is considered relatively clean water, even though the possible presence of pathogens in the water may pose human health risks. In...