Comparison of a rhizosphere-based method with other one-step extraction methods for assessing the bioavailability of soil metals to wheat

There is no method recognized as a universal approach for evaluation of bioavailability of heavy metals in soil. Based on the simulation of the rhizosphere soil conditions and integration of the combined effects of root-soil interactions as a whole, a rhizosphere-based method has been proposed. Wet fresh rhizosphere soil was extracted by low-molecular-weight organic acids (LMWOAs) to fractionate metal fractions of soil pools, which were then correlated with the metal contents of wheat roots and shoots. The rhizosphere-based method was compared with other one-step extraction methods using DTPA, EDTA, CaCl2, and NaNO3 as extractants and the first step of the Community Bureau of Reference (BCR) method. Simple correlation and stepwise multiple regression analysis were used for the comparison. Simple correlation indicated that the extractable Cu, Zn, Cr, and Cd of soils by the rhizosphere-based method were significantly correlated with the metal contents of wheat roots. For DTPA, BCR1 and EDTA methods there was a relatively poor correlation between the extractable Cu, Zn and Cd of soil and metal contents of wheat roots. Stepwise multiple regression analysis revealed that the equation of the rhizosphere-based method was the simplest one, and no soil properties variables needed to be added. In contrast, the equations of other one-step extraction methods were more complicated, and soil properties variables needed to be entered. The most distinct feature of the rhizosphere-based method was that the recommended method was suitable for acidic, neutral and near alkaline soils. However, the DTPA and EDTA extraction methods were suitable for calcareous soils only-or-only for acidic soils. The CaCl2, and NaNO3 extraction methods were only suitable for exchangeable metals. In short, the rhizosphere-based method was the most robust approach for evaluation of bioavailability of heavy metals in soils to wheat.     

染整废水处理工程设计

采用“生物接触氧化 +混凝气浮 +生物炭”工艺处理染整废水 ,COD去除率可达到 90 %以上 ,工程实践表明 ,该工艺处理效果好 ,运行稳定 ,投资省 ,处理后出水可达标排放     

石灰湿法脱硫过程中pH条件对结垢的影响研究

针对石灰湿法脱硫中存在的结垢问题，在鼓泡床中模拟了石灰湿法脱硫过程，通过分析液相的组成，结合反应机理探讨了pH对结垢的影响。结果表明，当pH控制在6.0～4．0时，既能避免结垢，又能获得较高的脱硫率。提出了实际中预测结垢倾向的方法。     

类-Fenton体系对水中17β-雌二醇的光降解

以250W照明金属卤化物灯为光源研究了水中17β雌二醇(E2)在类Fenton体系中的光降解。结果表明,Fe(Ⅲ)/H2O2体系能有效地光降解E2。pH3～6范围内,E2光降解率及反应初始速率随酸度的增大而增大;H2O2初始浓度越大,E2降解率及反应初始速率越大;E2初始浓度越低,E2降解率越高,反应初始速率越低。     

车内空气中挥发性有机物的研究

采用热脱附-气相色谱/质谱联用法对4辆处于静止状态下的车辆内部空气中挥发性有机物（VOCs）进行了研究,共定性检出了48种有机物,其中C6～C9之间的组分较多;并对VOCs的总浓度进行了定量,1#～4#车分别为1846、2289、1104和3146 μg/m^3;其中BTEX占VOCs总量的20%～30%;车内VOCs浓度与温度及车辆使用年限密切相关.     

包裹块石煤固氟燃料制备工艺研究

石灰或烧制白云岩与粘土、低氟无烟煤粉作为包裹材料，通过正交试验方法，对陕西省紫阳县蒿坪镇高氟块状石煤进行了固氟效果研究。结果表明，影响包裹石煤固氟效果的主要因素是无烟煤粉和石灰，影响顺序是无烟煤粉〉石灰〉粘土。最佳制备工艺条件为石煤块：无烟煤粉：石灰：粘土=70：10：10：5，固氟率达91．9％。     

等浓度配比法研究苯酚、硝基苯和问硝基苯胺对发光菌的联合毒性作用

分别测定了苯酚、硝基苯和间硝基苯胺对发光菌的单一毒性，以及等浓度配比和等毒性配比的二元及三元混合体系的联合毒性，采用相加指数法对其联合效应进行了评价。结果表明，等浓度比和等毒性比混合体系的联合作用结果一致：苯酚＋间硝基苯胺二元体系为协同作用，其他各体系为相加作用。为简化联合毒性实验方法，建议在研究相关系列化合物的联合毒性作用机制中，可采用等浓度配比方法。     

PCR-DGGE技术在水解酸化-缺氧法处理采油废水的微生物研究中的应用

采用PCR-DGGE技术直接从水解酸化和缺氧反应器中的污泥样品提取DNA,测定部分菌种的16S rDNA V3区片段序列,通过NCBI基因库比对,初步确定不同生物反应器内优势菌种,并进行了多样性指数分析.结果表明,水解酸化反应器中的生物膜与缺氧反应器中悬浮污泥微生物种群结构存在较大的差异,显示了在不同环境条件下,微生物群落结构的连续动态变化过程.     

雌酮在铁(Ⅲ)-草酸盐配合物体系中的光降解

以125 W高压汞灯为光源,研究了水中雌酮(E1)在铁(Ⅲ)-草酸盐体系中的光降解;考察了初始pH值、铁(Ⅲ)/草酸盐配比、E1初始浓度对E1光降解的影响.结果表明,铁(Ⅲ)/草酸盐体系能引发E1的光降解.在pH=3.5,Fe(Ⅲ)/Ox配比为10/120μmol/L时,2 mg/L E1光照160 min可以降解59%.在pH 3～6范围内,pH为3～4时E1降解效率最高;在2～10 mg/L范围内,光降解效率随水溶液中E1初始浓度的增加而降低.     

四氯化碳的生产与应用及其淘汰策略

四氯化碳是一种消耗臭氧层物质,其生产和消费都面临着严峻的淘汰形势.简要叙述了四氯化碳的生产技术,以四氯化碳为原料生产大宗化学品和精细化学品的转化技术,四氯化碳作为化工助剂在我国的应用情况以及相应的淘汰方法和技术进展.