一种便携式荧光测油仪在海上溢油应急监测中的适用性研究

研究了一种便携式荧光测油仪在海上溢油应急监测中的适用性,并与现行仲裁标准方法进行比较分析。研究表明:该便携式荧光测油仪测定海水中油类样品仅需100 mL水样,平均每个样品所需的前处理时间约340 s,方法检出限为0.003 mg/L,测定下限为0.012 mg/L。测定用标准物质配制的不同浓度海水样品,相对标准偏差为0.08%~0.87%,测定标准样品的相对误差为0.49%~4.50%,实际样品加标回收率为90%~107%。对标准物质配制的海水样品进行检测,与现行仲裁标准方法在0.05水平下无显著性差异。在渤海中部海上监测中,连续6 d测定不同标准样品的相对标准偏差为0.26%~0.83%。研究结果表明,该便携式荧光测油仪适用于现场对油类的定量分析和水质评价。     

Total petroleum hydrocarbon distribution in soils and groundwater in Songyuan oilfield, Northeast China

In order to investigate the distribution of the total petroleum hydrocarbons (TPH) in groundwater and soil, a total of 71 groundwater samples (26 unconfined groundwater samples, 37 confined groundwater samples, and 8 deeper confined groundwater samples) and 80 soil samples were collected in the Songyuan oilfield, Northeast China, and the vertical variation and spatial variability of TPH in groundwater and soil were assessed. For the groundwater from the unconfined aquifer, petroleum hydrocarbons were not detected in three samples, and for the other 23 samples, concentrations were in the range 0.01–1.74 mg/l. In the groundwater from the confined aquifer, petroleum hydrocarbons were not detected in two samples, and in the other 35 samples, the concentrations were 0.04–0.82 mg/l. The TPH concentration in unconfined aquifer may be influenced by polluted surface water and polluted soil; for confined aquifer, the injection wells leakage and left open hole wells may be mainly responsible for the pollution. For soils, the concentrations of TPH varied with sampling depth and were 0–15 cm (average concentration, 0.63 mg/g), >40–55 cm (average concentration, 0.36 mg/g), >100–115 cm (average concentration, 0.29 mg/g), and >500–515 cm (average concentration, 0.26 mg/g). The results showed that oil spillage and losses were possibly the main sources of TPH in soil. The consequences concluded here suggested that counter measures such as remediation and long-term monitoring should be commenced in the near future, and effective measures should be taken to assure that the oilfields area would not be a threat to human health.     

环境中总石油烃的气相色谱分析测定

将总石油烃划分为挥发性汽油类(C6～C10)、可萃取柴油和重油类(C10～C40)两部分,分别建立了通过吹扫捕集、液液萃取和超声溶剂萃取分离富集,气相色谱-火焰离子化检测器(GC-FID)测定环境水体和土壤中总石油烃的分析方法。以汽油、柴油、润滑油标准溶液进行外标校正,以色谱出峰总面积进行定量。汽油类(C6～C10)的检出限分别为0.04mg/L和0.42mg/kg,柴油和重油类(C10～C40)的检出限分别为0.06mg/L和4.9mg/kg。方法的精密度和准确度均良好。     

Development of a multi-criteria index ranking system for urban runoff best management practices (BMPs) selection

Low impact development best management practices (LID-BMPs) are considered to be cost-effective measures for mitigating the water quantity and quality impact of urban runoff. Currently, there are many types of LID-BMPs, and each type has its own intrinsic technical and/or economical characteristics and limitations for implementation. The selection of the most appropriate BMP type(s) for a specific installation site is therefore a very important planning step. In the present study, a multi-criteria selection index system (MCIS) for LID-BMP planning was developed. The selection indexes include 12 first-level indices and 26 second-level indices which reflect the specific installation site characteristics pertaining to site suitability, runoff control performance, and economics of implementation. A mechanism for ranking the BMPs was devised. First, each individual second-level index was assigned a numeric value that was based on site characteristics and information on LID-BMPs. The quantified indices were normalized and then integrated to obtain the score for each of the first-level index. The final evaluation scores of each LID-BMP were then calculated based on the scores for the first-level indices. Finally, the appropriate BMP types for a specific installation site were determined according to the rank of the final evaluation scores. In order to facilitate the application of the MCIS BMP ranking system, the computational process has been coded into a software program, BMPSELEC. A case study demonstrating the MCIS methodology, using an LID-BMP implementation planning at a college campus in Foshan, Guangdong Province, is presented.     

基于在线监测的南京市PM2.5中金属元素污染特征及健康风险评估

为了探究南京市细颗粒物（PM_2.5）中金属元素的污染特征及健康风险,利用在线多金属分析仪采集并分析了2022年南京市PM_2.5中10种金属元素的质量浓度,利用正定矩阵因子分解（PMF）模型进行金属元素的来源解析,并采用健康风险评价方法对其中5种重金属元素进行健康危害评估。结果表明,10种金属元素总的年均质量浓度为941.3 ng/m³,占PM_2.5年均质量浓度的3.4%;其中,铁（Fe）、钾（K）、锌（Zn）3种金属年均质量浓度占比为91.2%。来源解析结果表明,污染物主要来源于土壤尘、燃煤、秸秆焚烧及烟花爆竹燃放、机动车尾气排放及机械磨损。健康风险评价结果表明,锰（Mn）、钒（V）、镍（Ni）、砷（As）4种重金属元素的危害商（HQ）均＜1,均不存在非致癌风险;Ni、铅（Pb）的致癌风险（ECR）均＜10^-6,风险可控;As的致癌风险介于10^-6 ~ 10^-4之间,存在一定致癌风险。     

Influence of glucose feeding on the ligninolytic enzyme production of the white-rot fungus Phanerochaete chrysosporium

The present work studied the influence of glucose feeding on the ligninolytic enzyme production of Phanerochaete chrysosporium in a nitrogen-limited (C/N ratio is 56/8.8 mmol/L) medium. Several sets of shaking flask experiments were conducted. The results showed that 2 g/L glucose feeding on the first day of the culture (24 h after the inoculation) simulated both fungal biomass growth and enzyme production. The manganese peroxidase (MnP) activity was 2.5 times greater than that produced in cultures without glucose feeding. Furthermore, the glucose feeding mode in fed-batch culture was also investigated. Compared to cultures with glucose feeding every 48 h, cultures with glucose feeding of 1.5 g/L (final concentration) every 24 h produced more enzymes. The peak and total yield of MnP activity were 2.7 and 3 times greater compared to the contrast culture, respectively, and the enzyme was kept stable for 4 days with an activity of over 200 U/L. Translated from Acta Scientise Circumstantiae, 2007, 27(3): 363–368 [译自: 环境科学学报]     

CO2/pH对三种藻生长及光合作用的影响

研究了在不同pH值和不同溶解性无机碳(DIC)浓度下太湖中惠氏微囊藻、四尾栅藻和菱形藻的生长和光合作用特征.研究表明, CO2/pH对3种藻的影响明显不同.惠氏微囊藻生长的最适pH值为8.0～9.0,pH7.0～9.0时具有较高的光合作用速率;四尾栅藻在偏酸性和偏碱性环境水体中均能较好生长,在本实验的pH值范围内均具有较高的光合作用速率;四尾栅藻在偏酸性和偏碱性环境水体中均能较好生长,在本实验的pH值范围内都具有较高的光合作用速率;菱形藻生长的最适pH值为7.0左右,在此pH值下光合作用速率也最高.惠氏微囊藻的K0.5(DIC)略小于四尾栅藻和菱形藻,表明对外源无机碳的亲合力要略大于四尾栅藻和菱形藻;但当DIC浓度达到饱和时,惠氏微囊藻和四尾栅藻的最大光合作用速率要远大于菱形藻.     

利用嗜酸性硫杆菌的生物产酸作用处理洗毛废水

利用洗毛废水在低pH条件下,有机物絮凝沉降的特点,通过嗜酸性硫杆菌(Acidophilic thiobacillus)的产酸作用降低体系pH,破坏废水固有的稳定性,改变有机物的亲水性能,实现固液分离,达到去除COD的目的.试验结果表明,生物产酸作用能有效地去除废水COD,改善其脱水性能.当体系pH降至3.00, COD去除率达到最大值91.4%,处理后的废水有很好的机械脱水和沉降性能,比阻从大于9.81×10¹³　m·kg^-1降至5.60×10¹¹ m·kg^-1.而对照处理在整个培养期内,未发生明显的改变,仅有20%的COD被去除.本研究为油脂含量高、难被生物利用的有机废水提供了一条新的处理方法.     

美国AERMOD模型与中国大气导则推荐模型点源比较

介绍了美国AERMOD模型和中国大气导则推荐模型一般浓度公式,通过大气稳定度和扩散参数的确定、复杂地形处理和对流条件下污染物扩散等原理方面的比较认为,AERMOD模型优于大气导则推荐模型.以美国环境保护局(USEPA)2个试验场Clifty Creek(平坦地形)和Lovett(复杂地形)的数据资料为比较数据,分别用AERMOD模型和大气导则推荐模型计算SO₂小时质量浓度,在Pasquill 6类稳定度下用相对偏差(FB)、预测值与观测值的比率(RHC_R)及图形法(Q-Q图)等进行模型比较,结果表明:在RHC_R和FB中,AERMOD模型除个别值外,其他均好于大气导则推荐模型;而大气导则推荐模型存在接近或大于模型可靠性界限0.67(0.66和0.74),说明其可靠性比AERMOD模型差;图形法比较中,强不稳定和不稳定下AERMOD模型明显好于大气导则推荐模型,而大气导则推荐模型预测值明显偏低,其他稳定度下结果相差不大.研究认为:在平坦地形和复杂地形条件下,AERMOD模型点源预测值均优于大气导则推荐模型,并从原理上进行了解释.      

玉米淀粉粉尘爆炸危险性研究

为研究玉米淀粉粉尘爆炸危险性,采用哈特曼管式爆炸测试装置和20 L球爆炸测试装置对200目(<75μm)以下的玉米淀粉粉尘爆炸危险性进行评估,基于静电火花和粉尘质量浓度对粉尘爆炸的影响,对玉米淀粉的静电火花最小点火能量、爆炸下限质量浓度、最大爆炸压力和爆炸指数进行了研究,根据试验结果对玉米淀粉爆炸危险性进行分级。试验结果表明:温度在25℃,喷粉压力为0.80 MPa,粉尘质量浓度在250～750 g/m3范围内,粉尘的最小点火能量随着粉尘质量浓度增加而降低,其最小点火能量在40～80 mJ之间;在点火能量为10 kJ时,粉尘爆炸下限质量浓度在50～60 g/m3之间;在粉尘质量浓度为750 g/m3时,爆炸压力达到最大,为0.66 MPa;在粉尘质量浓度为500 g/m3时,爆炸指数达到最大,为17.21 MPa.m/s,其粉尘爆炸危险性分级为Ⅰ级。