深圳大气有机硝酸酯粒径分布特征和来源研究

于2021年3月30日至2021年4月17日利用超高分辨率气溶胶飞行时间质谱(Long-ToF-AMS),对深圳城市大气中的颗粒态有机硝酸酯(pON)开展高精度分析.基于两种估算pON的方法,计算得出pON对有机气溶胶(OA)的贡献占比为5.08％～11.00％.pON的日变化特征显示,其高值主要出现在夜间时段(19:...     

A novel sequence batch membrane carbonation photobioreactor developed for microalgae cultivation

A novel SBM-C-PBR was constructed for microalgae cultivation. Membrane fouling was greatly mitigated by membrane carbonation. NH₄⁺ and P removal rates were around 80% in SBM-C-PBR. Biomass was completely retained by membrane. In this study, a novel sequence batch membrane carbonation photobioreactor was developed for microalgae cultivation. Herein, membrane module was endowed functions as microalgae retention and CO₂ carbonation. The results in the batch experiments expressed that the relatively optimal pore size of membranes was 30 nm, photosynthetically active radiation was 36 W/m² and the CO₂ concentration was 10% (v/v). In long-term cultivation, the microalgal concentration separately accumulated up to 1179.0 mg/L and 1296.4 mg/L in two periods. The concentrations of chlorophyll a, chlorophyll b and carotenoids were increased about 23.2, 14.9 and 6.3 mg/L respectively in period I; meanwhile, the accumulation was about 25.0, 14.5, 6.6 mg/L respectively in the period II. Furthermore, the pH was kept about 5.5–7.5 due to intermittent carbonation mode, which was suitable for the growth of microalgae. Transmembrane pressure (TMP) was only increased by 0.19 and 0.16 bar in the end of periods I and II, respectively. The pure flux recovered to 75%–80% of the original value by only hydraulic cleaning. Scanning electron microscope images also illustrated that carbonation through membrane module could mitigate fouling levels greatly.     

一种新的快速测定水中COD的消化一分光光度法

探讨了在MnSO_4-CuSO_4复合催化剂、硫-磷混酸体系中,对样品进行恒温密封消解,用分光光度法测定溶液的COD值。实验得出测定化学需氧量的最佳条件:混酸H_2SO_4-H_3PO_4体积比为4:1,催化剂MnSO_4-CuSO_4质量比为1:2,MnSO_4-CuSO_4的总量为0．03g,消解温度为165℃,消解时间为15min。实验结果表明,此方法的测定结果与重铬酸钾法测定结果的相对误差≤5%,且有较好的重现性及较高的准确度与精密度。本法可同时消解多个试样,适用于大批量试样COD的测定,使试样的消解时间由标准法的2h缩短到了15min,同时用MnSO_4-CuSO_4复合催化剂代替价格昂贵的A_(g2)SO_4,大大降低了分析成本。     

车用汽油铅损害及其对策研究

针对车用汽油的抗爆性能要求,探讨四乙基铅（Ｐｂ（Ｃ２Ｈ５）４）抗爆添加剂的作用机理,并着重分析研究了由此而引起的发动机铅排放对人类造成的损害及给大气环境等带来的污染。还探讨了车用汽油铅损害的对策及其最新进展     

汽车左/右后轮罩冲压工艺及翻边、斜楔翻边模具设计

根据制件的特点 ,分析了其冲压成形的工艺难点 ,制定了合理的工艺 ,简化了模具设计和制造 ,并画出了制件的综合工序图 ,分析了各工序内容和工艺特点 ,说明了各工序模具设计的关键问题。同时以第 5道工序为例 ,重点分析了斜楔翻边、翻边模的结构、工作原理及设计要点     

Generator column determination of aqueous solubilities for non-ortho and mono-ortho substituted polychlorinated biphenyls

Aqueous solubilities of four non-ortho and eight mono-ortho substituted PCBs were determined using a generator-column technique followed by subsequent off-line GC/ECD analysis of the aqueous solutions. The method is based on pumping water through a column containing glass beads coated with the congener being studied and has been used to measure solubilities at room temperature. The method circumvents many of the experimental difficulties encountered with the traditional shake-flask system. Aqueous solubility of 3,3′,4,4′-tetrachlorobiphenyl determined by this procedure is compared with data obtained from the shake-flask method and the computational method. The precision of replicate measurements is better than ±6.5%. Aqueous solubilities determined for 12 congeners ranged from 6.07 × 10⁻¹¹ to 4.47 × ⁻⁹ mol/L and generally decreased with molecular weight and increased with degree of ortho-chlorine substitution within a molecular-weight class.     

Are current Chinese national ambient air quality standards on 24-hour averages for particulate matter sufficient to protect public health?

With rapid economic development and urbanization in recent decades, China has experienced the worsening of ambient air quality. For better air quality management to protect human health, Chinese government revised national ambient air quality standards(NAAQS) for particulate matter(PM) in 2012(GB3095-2012). To assess the effectiveness of current NAAQS for PM on public health in Chinese population, we conducted a metaanalysis on published studies examining the mortality risk of short-term exposure to PM with aerodynamic diameters less than 10 and 2.5 μm(PM_(10) and PM_(2.5)) in China. The reported24-hour concentrations of PM_(10) and PM_(2.5) in studies ranged from 43.5 to 150.1 μg/m~3 and 37.5 to 176.7 μg/m~3. In the pooled excess, mortality risk estimates of short-term exposure to PM.In specific, per 10 μg/m~3 increase in PM_(10), we observed increases of 0.40%(95%CI: 0.33%,0.47%), 0.57%(95%CI: 0.44%, 0.70%) and 0.49%(95%CI: 0.40%, 0.58%) in total, respiratory and cardiovascular mortality, per 10 μg/m~3 increase in PM_(2.5), we observed increases of 0.51%(95%CI: 0.38%, 0.63%), 0.62%(95%CI: 0.52%, 0.73%) and 0.75%(95%CI: 0.54%, 0.95%) in total,respiratory and cardiovascular mortality. Finally, we derived 125 μg/m~3 for PM_(10) and 62.5 μg/m~3 for PM_(2.5) as 24-hour recommendation values based on the pooled estimates. Our results indicated that current Chinese NAAQS for PM could be sufficient in mitigating the excess mortality risk from short-term exposure to ambient PM. However, future research on longterm exposure cohort studies in Chinese population is also essential in revising annual averages for PM in Chinese NAAQS.     

改性粉煤灰在处理锑矿选矿废水中的应用

针对锑矿选矿废水中锑和丁基黄原酸钠严重超标的问题,用酸改性粉煤灰对其进行吸附处理.试验结果表明,当改性粉煤灰处理选矿废水的最佳质量体积比(g.mL-1)为1:100,pH值为3,静置时间为4h时,可以将选矿废水中的锑浓度从28.611mg.L-1降到0.05mg.L-1以下,去除率达99.8%以上;废水中的丁基黄原酸钠浓度可从0.373mg.L-1降到0.02mg.L-1以下,去除率达95.0%以上.处理废水后的改性粉煤灰用硫酸-硝酸浸提,浸出液中重金属离子浓度均低于国家浸出毒性标准,表明改性粉煤灰是一种很好的锑矿选矿废水处理剂.     

静脉产业类生态工业园区的建设方法分析

静脉产业类生态工业园区运用先进的技术,将生产和消费过程中产生的废物资源化,是中国循环经济建设的重点领域之一。但是中国现有的静脉产业类生态工业园区尚处于创建阶段,没有形成规模化发展,因此可以在建设过程中借鉴日本、德国等发达国家的成功经验,探索适合中国国情的建设模式。本文通过分析静脉产业类生态工业因区在生产原料、生产过程和产品销售方面的主要影响因素以及其他国家采取的相应措施,为中国静脉产业类生态工业园区的建设提出建议。     

Baltur燃烧器电加热桶智能温控器的设计与研制

通过对Baltur燃烧器温度控制器和电气控制原理的分析,提出智能数字温控器的设计方案,以便对电加热桶内油品进行数字温度调节和自动控制,提高Baltur燃烧器的安全可靠性.