Although PVC-containing wastes are an important potential source of energy they are frequently disposed in landfill. In thermal treatment processes such as pyrolysis and gasification, the presence of poly(vinyl chloride) (PVC), a compound with 56.7% of chlorine, may cause problems concerned with environmental protection, as consequence of the formation of hydrochloric acid, chlorine gas and dioxins, as well as corrosion phenomena of the reactor/equipment materials. Thus, a possible solution may involve a previous removal of the chlorine from PVC containing waste through a pyrolysis process at low temperatures before the material being submitted to a subsequent thermal treatment, for energetic valorization. In this work, a kinetic model for the thermal decomposition of PVC has been developed, in view of its de-chlorination. DTA/TGA testing at different temperatures indicated a first order reaction and an activation energy of 133,800J/mol. An almost completed de-chlorination reaction was obtained at 340°C under an inert atmosphere. The resulted material is a C(n)H(n) type polymer with potential to be used in an energy recovery process. Validation test performed at laboratory scale indicate that the temperature of 340°C enables the removal of ~99.9% of the chlorine present in PVC. The chloride can be fixed in the form of an aqueous solution of HCl or calcium chloride, driving to an alternative full process with environmental benefits and reduction of the costs associated to the PCV - containing materials/wastes management. 相似文献
This paper describes an integrated approach to transform an industrial park into an eco-industrial park by combining three interconnected goals, namely, the consolidation of industrial symbiosis, the promotion of sustainable accessibility and the development of multi-functionalities. The result is an interdependent approach where industrial and territorial ecosystems are jointly planned, seeking a more sustainable level of development that considers industrial activity, the transportation of people and goods and the spatial articulation with the neighbouring environment and urban areas. The critical points and challenges for improving the territorial integration of the French industrial park of Salaise-Sablons are discussed, providing lessons for the future. Regardless of the specificities of the case study, this approach has the potential to be adopted in similar industrial parks. 相似文献
The Penn State/NCAR Mesoscale Meteorological Model 5 (MM5), Sparse Matrix Operator Kernal Emissions (SMOKE), and Community
Multiscale Air Quality (CMAQ) modeling systems were employed to simulate ozone concentration distribution within the State
of Arizona, in particular, Phoenix air basin, as supporting information to designate nonattainment areas of the U.S. Environmental
Protection Agency's new 8-h ozone standard. In general, based on statistical comparisons between predictions and available
(sparsely distributed) observations, the modeling system performed reasonably well for the Phoenix basin, thus proving it
to be a useful tool for both regulatory as well as research applications. Detailed inspection, however, revealed a serious
problem with respect to the details of the ozone distribution in that for some days the transition from downslope flow to
upslope flow in the Phoenix basin was delayed in the model, causing the ozone distribution to show an unrealistic high-ozone
bias toward the west valley. Implementation of a modified subgrid parameterization improved the time of transition, and hence
the prediction of ozone and its precursor distributions. This study points to possible inadequacies of commonly used subgrid
parameterizations in dealing with rapidly changing flow conditions such as morning (and evening) transitions. 相似文献
Lake Vela, located in the Portuguese littoral-centre, is a temperate shallow lake exhibiting a high trophic status. This aquatic
ecosystem has been potentially exposed to contamination generated by agricultural and livestock activities held in their drainage
basin, which seriously compromise their health. This work summarizes some background information and presents the problem
formulation step of the ERA. Therefore, it evaluates the characteristics of the stressor(s), describes the ecological system
and receptors and suggests a conceptual model, which predicts the potential exposure pathways, relating suspected sources
to the defined endpoints. This introductory step also described an analysis plan on the entire study, which includes a delineation
of the assessment design, data needs, measures, and methods for conducting the analysis phase of the risk assessment process. 相似文献
The leaching of salt and mineral elements from three composts prepared with residual vegetable crop biomass (melon, pepper or zucchini) was studied using methacrylate columns and distilled water. The benefits of the leached composts to be used for ornamental potted plant production were also analysed. After leaching 5 container capacities of effluent, both the electrical conductivity and the concentration of soluble mineral elements in compost leachates decreased substantially and remained close to the target levels. Composts reacted differently to leaching due to differences in the raw waste sources and the composting process and hence, in their physical and chemical characteristics. At the end of the experiment, after pouring 8 container capacities of water, the leaching efficiency of the salts was 96%, 93% and 87% for melon, pepper and zucchini-based composts, respectively. Mineral elements differed in their ability to be removed from the composts; N (NH4+ and NO3?), K+, Na+, Cl?, and SO42? were leached readily, whereas H2PO4?, Ca2+, and Mg2+ were removed hardly. Leached composts showed a range of physico-chemical and chemical characteristics suitable for use as growing media constituents. Potted Calendula and Calceolaria plants grew in the substrates prepared with the leached composts better than in those made with the non-leached ones. Finally, special emphasis must be paid to the management of the effluents produced under commercial conditions to avoid environmental pollution. 相似文献
The objective of this study is to investigate the potential process for the removal of carbon dioxide (CO2) from flue gas using fundamental membrane contactor, which is a membrane gas absorption (MGA) system. The experiments consisted of microporous polyvinylidenefluoride (PVDF) flat sheet membrane with 0.1 μm (as module I) and 0.45 μm (as module II) pore size. 2-Amino-2-methyl-1-propanol (AMP) solution was employed as the liquid absorbent. The effect of AMP concentration was studied with variation in the range 1–5 M. In addition, the experiments were carried out with 10%, 20%, 30% and 40% gas ratio of CO2 to N2 and pure CO2 as well. Through contact angle measurement, membranes for module I and module II were obtained with CA values of around 130.25° and 127.77°, respectively. The mass transfer coefficients for module II are lower than those of module I for 1–5 M of AMP. Furthermore, the increase in CO2 concentration in the feed gas stream enhanced the CO2 flux as the driving force of the system was increased in sequence from 1 M to 5 M of AMP. However, after the particular percentage (40%) of CO2 inlet concentration, the CO2 fluxes seem saturated. The combination of AMP as liquid absorbent and PVDF microporous membrane in MGA system has shown the potential to remove the CO2 from flue gas. In addition, the higher AMP concentration gave higher mass transfer coefficient at low liquid flow rates. 相似文献
Current studies indicate a need to integrate environmental management with manufacturing strategy, including topics like cross-functional integration, environmental impact, and waste reduction. Nevertheless, such studies are relatively rare, existing still a need for research in specific regional contexts. At the same time, the results found are not unanimous. Due to these gaps, the objective of this article is to analyze if environmental management can be considered a new competitive priority for manufacturing enterprises located in Brazil. A cross-sectional survey was conducted with Brazilian companies certified by ISO 14001. Sixty-five valid questionnaires were analyzed through Structural Equation Modelling (SEM). The first conclusion is that environmental management presents a preventive approach in the sample analyzed, focused on eco-efficiency, what potentially do not to create a competitive advantage. This preventive approach inhibits environmental management from being regarded as a new competitive manufacturing priority, in the full sense as defined by the literature. Another important result is that environmental management, although following a preventive focus, may influence positively the four manufacturing priorities: cost, quality, flexibility and delivery. 相似文献
Objective: A zero tolerance alcohol restriction law was adopted in Brazil in 2008. In order to assess the effectiveness of this intervention, the present study compares specific mortality in 2 time series: 1980–2007 and 2008–2013.
Methods: Data on mortality and population were gathered from official Brazilian Ministry of Health information systems. Segmented regression analyses were carried out separately for 3 major Brazilian capitals: Belo Horizonte, Rio de Janeiro, and São Paulo.
Results: In 2 cities (Belo Horizonte and Rio de Janeiro) there were no significant changes in mortality rate trends in 2 periods, 1980 to 2007 and 2008 to 2013, where the observed rates did not differ significantly from predicted rates. In São Paulo, a decreasing trend until 2007 unexpectedly assumed higher levels after implementation of the law.
Conclusion: There is no evidence of reduced traffic-related mortality in the 3 major Brazilian capitals 5.5 years after the zero tolerance drinking and driving law was adopted. 相似文献