Einflu? chemischer Kontaminanten (insbesondere Schwermetalle) auf die Bodenorganismen und ihre ?kologisch bedeutenden Aktivit?ten

Für die Vorsorge- und Sanierungsma?nahmen im Rahmen des Bodenschutzes ist es notwendig, Auswirkungen anthropogener Bodenbelastungen auf die im Boden lebenden Organismen und auf ihre ?kologisch bedeutenden Aktivit?ten zu kennen und voll zu berücksichtigen. Der vorliegende Aufsatz bringt eine übersicht insbesondere betreffend den Einflu? von Schwermetallen auf (a) die quantitative und qualitative Zusammensetzung der Population von Bodenorganismen; (b) die mikrobiellen Umsetzungen kohlenstoff- und stickstoffhaltiger Substrate; (c) die Enzymaktivit?ten im Boden; (d) den Abbau von Pflanzenrückst?nden; (c) die Resistenzerscheinungen bei Bodenmikroorganismen und (f) die Auswirkungen abiotischer Bodenfaktoren auf die biologische Wirksamkeit der Schadstoffe. Aus den zahlreichen durch Referenzen belegten Erkenntnissen werden Schlu?folgerungen gezogen, die auf die Eignung von Mikrobenpopulationen und ihrer Aktivit?ten für die Beurteilung der anthropogenen Bodenbelastungen hinweisen.     

Enantiomer fractions of chiral organochlorine pesticides and polychlorinated biphenyls in standard and certified reference materials

Enantiomeric ratios (ERs) and enantiomeric fractions (EFs) of a number of chiral organochlorine pesticides and PCB atropisomers were measured by chiral gas chromatography/mass spectrometry (GC/MS) in five standard (SRM) and certified (CRM) reference materials: SRM 1588a (organics in cod liver oil), SRM 1945 (organics in whale blubber), Marine Mammal Quality Assurance Exercise Control Material IV (NIST IV, organics in whale blubber), CRM trout, and CRM EC-5 (sediment). Target analytes were cis- and trans-chlordane, heptachlor exo-epoxide, oxychlordane, U82, MC5, MC6, MC7, o,p^′-DDT, and PCB congeners 91, 95, 136, 149, 174, 176, and 183. Measured ERs and EFs are in close agreement with the few literature values reported for some of these analytes in SRMs and CRMs. Chiral PCB ERs and EFs measured by one-dimensional chiral GC/MS were similar to values measured using multidimensional chiral GC/MS. Non-racemic chiral compositions are in agreement with known uptake and biotransformation in the respective environmental matrices. These values should aid in the quality assurance/quality control methodologies for chiral environmental chemistry using standardized reference materials.     

Validation of a diffusive sampler for NO2

A diffusive sampler for NO2, Willems badge, was validated in laboratory experiments and field tests. The collecting reagent for NO2 in the sampler is triethanolamine, and the analysis is based on a modified colorimetric method, the Saltzman method. The analysis was performed by a flow injection analysis (FIA) technique. The sampling rate for the sampler was determined to be 40.0 ml min-1. There was no effect of NO2 concentration or relative humidity on sampling rate, and the influence of sampling time was found to be small. The detection limit was 4 micrograms m-3 for a 24 h sample. The capacity is high enough to allow sampling of 150 micrograms m-3 for 7 days, which is twice the recommended Swedish short-term (24 h) guideline value as a 98-percentile over 6 months. In field tests, the sampler performed well, even at wind speeds higher than 2 m s-1, and at low temperatures. The overall uncertainty of the method was 24%. The sensitivity and capacity of the method also make it suitable for personal sampling for 2-8 h in working environments.     

Modelling Acidification and Recovery of Swedish Lakes

The MAGIC model was calibrated to 143 lakes in Sweden, all of which are monitored in Swedish national monitoring programmes conducted by the University of Agricultural Sciences (SLU). Soil characteristics of the lake catchments were obtained from the National Survey of Forest Soils and Vegetation also carried out by SLU. Deposition data were provided by the Swedish Meteorological and Hydrological Institute (SMHI). The model successfully simulated the observed lake and soil chemistry at 133 lakes and their catchments. The fact that 85% of the lakes calibrated successfully without being treated in an individual way suggests that data gathered by the national monitoring programmes are suitable for modelling of soil and surface water recovery from acidification. The lake and soil chemistry data were then projected into the future under the deposition scenario based on emission reductions agreed in the Gothenburg protocol. Deposition of sulphur (sea salt corrected) was estimated to decrease from 1990 to 2010 by 65–73%; deposition of nitrogen was estimated to decrease by 53%. The model simulated relatively rapid improvements in lake water chemistry in response to the decline in deposition from 1990 to 2010, but the improvements levelled off once deposition stabilised at the lower value. There was a major improvement of simulated lake water charge balance acid neutralising capacity (ANC) from 1990 to 2010 in all lakes. The modelled lakes were divided into acidification sensitive and non-sensitive. The modelled sensitive lakes are representative of 20% of the most sensitive lakes in Sweden. By 2010, the ANC in the sensitive lakes was 10 to 50 μeq L^-1 below estimated pre-industrial levels and did not increase much further from 2010 to 2040. Soils at the majority of the modelled catchments continued to lose base cations even after the simulated decline in acid deposition was complete, i.e. after the year 2010. Based on this model prediction, the acidification of the Swedish soils will in general not be reversed by the deposition reduction experienced over the last 10 years and expected to occur by the year 2010.     

The potential of foliar treatments for enhanced phytoextraction of heavy metals from contaminated soil

Phytoextraction is the plant‐based removal of inorganic contaminants from the soil by root absorption and subsequent translocation to harvestable plant parts. The efficiency of this technique is limited by the phytoavailability of these contaminants in the soil and the root‐to‐shoot transport. To enhance the phytoextraction efficiency, the use of soil amendments has been widely investigated. Potential risks such as increased ecotoxicological effects and leaching of mobilized contaminants caution against the use of persistent mobilizing agents. The potential use of foliar amendments to enhance mineral absorption and/or translocation offers prospects for complementing or substituting soil amendments for enhanced phytoextraction purposes. This study presents an explorative screening to evaluate the feasibility of this approach. Helianthus annuus giganteus plants were grown in moderately contaminated dredged sediment for ten weeks, with daily foliar treatments from week six onward: (1) distilled water (control), (2) magnesium‐ethylenediaminetetraacetic acid (Mg‐EDTA), (3) diethylenetriaminepentaacetic acid (DTPA), (4) nitrilotriacetic acid (NTA), (5) citric acid, (6) oxalic acid, (7) calcium acetate, (8) ammonium thiocyanate (NH₄SCN), and (9) cystein. Applied doses varied between treatments based on plant tolerance: 15 μmol per plant for cystein, 60 μmol per plant for DTPA and NH₄SCN, 180 μmol per plant for Mg‐EDTA and NTA and 400 μmol per plant for the organic acids. At the end of the experiment, shoot accumulation of cadmium, chromium, copper, iron, manganese, nickel, lead, and zinc was evaluated. © 2004 Wiley Periodicals, Inc.     

Influence of Processing Additives on the Degradation of Melt-Pressed Films of Poly(ε-Caprolactone) and Poly(Lactic Acid)

Melt-pressed films of polycaprolactone (PCL) and poly(lactic acid) (PLA) with processing additives, CaCO₃, SiO₂, and erucamide, were subjected to pure fungal cultures Aspergillus fumigatus and Penicillium simplicissimum and to composting. The PCL films showed a rapid weight loss with a minor reduction in the molecular weight after 45 days in A. fumigatus. The addition of SiO₂ to PCL increased the rate of (bio)erosion in A. fumigatus and in compost. The use of a slip additive, erucamide, was shown to modify the properties of the film surface without decreasing the rate of bio(erosion). Both the rate of weight loss and the rate of molecular weight reduction of PCL increased with decreasing film thickness. The addition of CaCO₃ to PLA significantly reduced the thermal degradation during processing, but it also reduced the rate of the subsequent (bio)degradation in the pure fungal cultures. PLA without additives and PLA containing SiO₂ exhibited the fastest (bio)degradation, followed by PLA with CaCO₃. The degradation of the PLA films was initially governed by chemical hydrolysis, followed by an acceleration of the weight change and of the molecular weight reduction. PLA film subjected to composting exhibits a rapid decrease in molecular weight, which then remains unchanged during the measurement period, probably because of crystallization.     

Solid waste treatment within the framework of life-cycle assessment

Traditionally, treatment of solid waste has been given limited attention in connection with life-cycle assessments (LCAs). Often, only the amounts of solid wastes have been noted. This is unsatisfactory since treatment of solid waste, e.g. by landfilling or incineration, is an operation, requiring inputs and producing outputs, which should be described in the inventory of an LCA, in parallel to other operations. However, there are difficulties in describing emissions from solid waste treatments and there is a need for development of such methods. In this paper an approach for describing emissions from incineration and landfilling is outlined. Methodological questions concerning the time-frame and allocation principles are discussed. Methods for estimating potential emissions from landfilling of municipal solid waste and industrial wastes are suggested. The methods are used for calculating potential emissions from landfilling of some typical wastes. These emissions are compared with the emissions from other stages in the life cycle for some materials and wastes. it is shown that the potential emissions from landfilling are, for some products, of importance for the final results. Hence, if emissions from landfilling are neglected, or underestimated, results and conclusions in an LCA may be misleading.     

Prenatal diagnosis of MPPH syndrome

We report the prenatal sonographic detection of a fetus with megalencephaly, polymicrogyria, postaxial polydactyly and hydrocephaly. Only 14 patients have been reported in the literature so far, all but one were diagnosed postnatally. The polymicrogyria in the frontoparietal lobe was confirmed by prenatal magnetic resonance imaging. Additionally, a hypoplastic thymus as seen in a 22q11 deletion was present. Although polymicrogyria along with pre-axial polydactyly has been described in 22q11 deletion, the diagnosis of Di George syndrome was ruled out. The etiology of megalencephaly, polymicrogyria, postaxial polydactyly and hydrocephaly has not been revealed yet. A dominant as well as recessive inheritance has been suggested. © 2013 John Wiley & Sons, Ltd.