CO2 Mitigation: On Methods and Parameters for Comparison of Fossil-Fuel and Biofuel Systems

The replacement of fossil fuels by biofuels could be an important means of reducing net carbon dioxide (CO₂) emission. An estimation of the CO₂ mitigation efficiency of biofuel systems depends on the method and assumptions used. Here, different parameters and methods are discussed for comparing fossil-fuel- and biofuel-based systems. Three parameters are suggested: the monetary cost, the primary energy cost and the biofuel cost of CO₂ mitigation. They are defined as the difference in monetary expenditure, primary energy use and biofuel use between the compared systems, divided by the difference in net CO₂ emission between the systems. Cogeneration and separate production of electricity and heat is then compared using these parameters and the methods of multi-functional products or subtraction. In both methods, either electricity or heat is regarded as the main product and the other is regarded as a by-product. The multi-functional method is preferable due to its transparency as both the main product and the by-product are part of the functional unit. Using heat as the main product illustrates the typical situation that the heat demand limits the use of cogeneration. When comparing systems the output from them should not differ. If the by-product is not fully, cogenerated part of the by-product has to be produced separately. A logical choice for producing this part of the by-product is to use a similar fuel and technology as used for cogeneration.     

Geochemistry and pH control of seepage from Ni-Cu rich mine tailings at Selebi Phikwe,Botswana

Acid mine drainage from mine tailings at Selebi Phikwe, eastern Botswana, has been investigated using a combination of total decomposition, sequential extraction, X-ray diffraction, Mössbauer spectroscopy, and SEM analyses of solid phase samples, water analyses, isotopic analyses, and geochemical modeling. The principal ferric phases in the seepage stream sediments are jarosite and goethite, which incorporate Ni and Cu. The Mössbauer spectroscopy (MS) indicated exclusively 3+ oxidation state of iron with typical features of ferric hydroxides/sulfates. A fraction of dissolved sulfate is also sequestered in gypsum which precipitates further downstream. Significant portions of Fe, Ni, and Cu are transported in suspension. Values of pH decreased downstream due to H⁺ generated by the precipitation of jarosite. Values of δ²H and δ¹⁸O indicate evaporation of pore water in the mine tailings before seepage. Values of δ³⁴S(SO₄) are consistent with the oxidation of sulfides, but sample from the seepage face is affected by dissolution of gypsum. No minerals of Ni and Cu were detected and the principal attenuation processes seem to be adsorption and co-precipitation with jarosite. Higher contents of Cu are sequestered in solid phases compared to Ni, in spite of much higher dissolved Ni concentrations. Based on the speciation calculations, seepage water is undersaturated with respect to all Ni and Cu phases and adsorption and co-precipitation with jarosite seems to be the principal attenuation processes. Direct geochemical modeling was able to reproduce downstream pH trends, thus confirming the precipitation of jarosite as the principal pH-controlling process.     

Population structure and genetic variation of lane snapper (<Emphasis Type="Italic">Lutjanus synagris</Emphasis>) in the northern Gulf of Mexico

Lane snappers (Lutjanus synagris), sampled from eight localities in the northern Gulf of Mexico (Gulf) and one locality along the Atlantic coast of Florida, were assayed for allelic variation at 14 nuclear-encoded microsatellites and for sequence variation in a 590 base-pair fragment of the mitochondrially encoded ND-4 gene (mtDNA). Significant heterogeneity among the nine localities in both microsatellite allele and genotype distributions and mtDNA haplotype distributions was indicated by exact tests and by analysis of molecular variance (AMOVA). Exact tests between pairs of localities and spatial analysis of molecular variance (SAMOVA) for both microsatellites and mtDNA revealed two genetically distinct groups: a Western Group that included six localities from the northwestern and northcentral Gulf and an Eastern Group that included three localities, one from the west coast of Florida, one from the Florida Keys, and one from the east (Atlantic) coast of Florida. The between-groups component of molecular variance was significant for both microsatellites (Φ _CT = 0.016, P = 0.009) and mtDNA (Φ _CT = 0.208, P = 0.010). Exact tests between pairs of localities within each group and spatial autocorrelation analysis did not reveal genetic heterogeneity or an isolation-by-distance effect among localities within either group. MtDNA haplotype diversity was significantly less (P < 0.0001) in the Western Group than in the Eastern Group; microsatellite allelic richness and gene diversity also were significantly less in the Western Group (P = 0.015 and 0.013, respectively). The difference in genetic variability between the two groups may reflect reduced effective population size in the Western Group and/or asymmetric rates of genetic migration. The relative difference in variability between the two groups was substantially greater in mtDNA and may reflect one or more mtDNA selective sweeps; tests of neutrality of the mtDNA data were consistent with this possibility. Bayesian analysis of genetic demography indicated that both groups have experienced a historical decline in effective population size, with the decline being greater in the Western Group. Maximum-likelihood analysis of microsatellite data indicated significant asymmetry in average, long-term migration rates between the two groups, with roughly twofold greater migration from the Western Group to the Eastern Group. The difference in mtDNA variability and the order-of-magnitude difference in genetic divergence between mtDNA and microsatellites may reflect different demographic events affecting mtDNA disproportionately and/or a sexual and/or spatial bias in gene flow and dispersal. The spatial discontinuity among lane snappers in the region corresponds to a known zone of vicariance in other marine species. The evidence of two genetically distinct groupings (stocks) has implications for management of lane snapper resources in the northern Gulf.     

Field trial experiment: Phytoremediation with Salix sp. on a dredged sediment disposal site in Flanders,Belgium

Remediation of heavy metal contamination in soil is a widespread environmental issue. Conventional remediation techniques are invasive and often too expensive, particularly if large areas of soil are contaminated. Phytoremediation is the use of plants to remediate soil and groundwater. Phytoremediation of inorganic comtaminants such as metals can be further catagorized into phytostabilization and phytoextraction. These techniques have gained an increasing amount of attention and research over the last ten years. Phytoextraction of heavy metals and periodical removal of harvestable plant parts results in a gradual decrease of pollutant levels in the top soil. Woody species such as Salix sp. (willow) do not represent the fastest phytoextraction procedure compared to uptake by herbaceous species; however, they offer the added advantage of possible reuse of the produced biomass (wood) for the production of renewable energy. Here we present the results of a field experiment conducted to evaluate the use of Salix to remediate soil contaminated with cadmium and zinc at a dredged sediment disposal site in Flanders, Belgium. © 2003 Wiley Periodicals, Inc.     

Determination of nitrate and other water quality parameters in groundwater from UV/Vis spectra employing partial least squares regression

The use of UV/Vis spectroscopy in combination with partial least squares (PLS) regression for the simultaneous prediction of nitrate and non-purgeable organic carbon (NPOC) in groundwaters was evaluated. A model of high quality was obtained using first order derivative spectra in the range 200-300 nm. Inclusion of non-UV-absorbing constituents in the modeling procedure, i.e., chloride, sulfate, fluoride, total carbon (TC), inorganic carbon (IC), alkalinity, pH and conductivity was also evaluated. This model seemed to be useful for prediction of chloride, TC, IC, alkalinity and conductivity, while its ability to predict sulfate, fluoride and pH was poor. In conclusion, application of PLS regression, which requires neither filtration of samples nor addition of chemicals, is a promising alternative for fast interpretation of geochemical patterns of groundwater quality.     

Historical pollution of seldom monitored trace elements in Sweden--Part A: sediment properties and chronological indicators

Sediment cores from four small oligotrophic boreal lakes, with minor acidification, in remote regions of central Sweden were used for historical interpretation of their metal content, with focus on Cu, Cd, Pb and Zn in Lake Stensj?n, which has the longest sediment record (at least two centuries according to (210)Pb dating). Comparison is made with the other three lakes. Major and trace elements in lake water, porewater and the acid-leached (HNO(3)) solid sediment phase was analysed with ICP-MS. In addition, general lake water chemistry, TOC and principal anions were measured in the aqueous phases. Redistribution processes were interpreted from geochemical modelling. The solid/solution distribution of pe/pH sensitive elements, indicates a minor diagenetic redistribution and the concentration profiles are therefore suitable for chronological evaluation. The ratios of Al, Ti, Sc and V, indicated a qualitative shift of sedimenting material a century ago, which did not have any impact on the retention of trace elements. Lead had a concentration profile, supported by the (206)Pb/(207)Pb ratio, where it was possible to distinguish preindustrial conditions, early industrialisation in Europe, industrialisation in Sweden, and the use of leaded petrol after the Second World War. Cadmium showed a similar concentration pattern. The zinc profile resembled that of cadmium, but with less enrichment. Local lithogenic sources are believed to be quantitatively important. The solid/solution distribution (K(d)) was independent of depth for all four elements. The sediment concentrations of copper and zinc are not related to early industrialisation but its concentration has doubled since the Second World War.     

Diurnal variations of abiotic parameters in a stream,recipient for drainage water in Ranstad,southwest Sweden

During 24 h, water samples were taken for determination of a number of key parameters in a water system containing high concentrations of FeII at circumneutral pH. None of the major constituents (Ca, Mg, Na, K and sulfate) showed diurnal variations, while dissolved oxygen and pH increased during the night. This increase could entirely be explained by the decrease in water temperature. However, the concentration of FeII slightly increased at constant concentration of total Fe during the night, opposite to earlier observations in other systems where the presence of FeII was shown to be controlled by photoreduction. Nocturnal peaks of FeII have also been observed in other systems with high iron concentrations, however, at acidic pH, but without obvious explanation. The mechanisms for this process therefore need further investigation.     

Sulfur recirculation for increased electricity production in Waste-to-Energy plants

Sulfur recirculation is a new technology for reducing boiler corrosion and dioxin formation. It was demonstrated in full-scale tests at a Waste to Energy plant in Göteborg (Sweden) during nearly two months of operation. Sulfur was recirculated as sulfuric acid from the flue gas cleaning back to the boiler, thus creating a sulfur loop.The new technology was evaluated by extensive measurement campaigns during operation under normal conditions (reference case) and operation with sulfur recirculation. The chlorine content of both fly ash and boiler ash decreased and the sulfur content increased during the sulfur recirculation tests. The deposit growth and the particle concentration decreased with sulfur recirculation and the dioxin concentration (I-TEQ) of the flue gas was reduced by approximately 25%. Sulfuric acid dew point measurements showed that the sulfuric acid dosage did not lead to elevated SO₃ concentrations, which may otherwise induce low temperature corrosion.In the sulfur recirculation corrosion probe exposures, the corrosion rate decreased for all tested materials (16Mo3, Sanicro 28 and Inconel 625) and material temperatures (450 °C and 525 °C) compared to the reference exposure. The corrosion rates were reduced by 60–90%. Sulfur recirculation prevented the formation of transition metal chlorides at the metal/oxide interface, formation of chromate and reduced the presence of zinc in the corrosion products. Furthermore, measured corrosion rates at 525 °C with sulfur recirculation in operation were similar or lower compared to those measured at 450 °C material temperature in reference conditions, which corresponds to normal operation at normal steam temperatures. This implies that sulfur recirculation allows for higher steam data and electricity production without increasing corrosion.     

Metal Extraction from Road Sediment using Different Strength Reagents: Impact on Anthropogenic Contaminant Signals

Washoff of road deposited sediment into storm drainsystems is one of the major contributors to nonpoint sourcepollution in urban fluvial networks. These sediments contain avariety of potentially toxic organic and inorganic contaminants.Road sediment from 13 locations in an urban (non-industrialized)drainage basin, and soil from 10 background (control) locationswere collected to assess total and labile fractions of Al, Co,Cu, Fe, Mn, Ni, Pb and Zn. Four digestions, of varying strength,were used to assess contaminant levels, these included: a totalfour-acid digestion, a microwave-assisted digestion withconcentrated nitric acid (USEPA Method 3051), a 0.5 M `cold' HCl,and a 0.05 M EDTA (pH 7). Road sediment data indicate that Al,Co, Fe, Mn and Ni were primarily lithogenic in origin, while Cu,Pb and Zn showed very significant anthropogenic signals, mostprobably from vehicle-related sources. Median Pb concentrationenrichment ratios for the EDTA extraction were about 42,indicating an extreme anthropogenic signal. The weak extractants(HCl and EDTA) are considered in this study to be superior intheir ability to characterize the degree of anthropogeniccontamination and should be utilized more widely in environmentalcontaminant studies.