Characterization and validation of a Portuguese natural reference soil to be used as substrate for ecotoxicological purposes

This study describes the first attempt to validate a Portuguese natural soil (PTRS1) to be used as reference soil for ecotoxicological purposes, aimed to both: (i) obtain ecotoxicological data for the derivation of Soil Screening Values (SSVs) with regional relevance, acting as a substrate to be spiked with ranges of concentrations of the chemicals under evaluation and (ii) act as control and as substrate for the dilution of contaminated soils in ecotoxicological assays performed to evaluate the ecotoxicity of contaminated soils, in tier 2 of risk assessment frameworks, applied to contaminated lands. The PTRS1 is a cambisol from a granitic area integrated in the Central Iberian Zone. After chemical characterization of the soil in terms of pseudo-total metals, PAHs, PCBs and pesticide contents, it was possible to perceive that some metals (Ba, Be, Co, Cr and V) surpass the Dutch Target Values (Dtvs) corrected for the percentage of organic matter and clay of the PTRS1. Nevertheless, these metals displayed total concentrations below the background total concentrations described for Portuguese soils in general. The same was observed for aldrin, endosulfan I, endosulfan II, heptachlor epoxide, and heptachlor; however the Dtvs corrected become negligible. The performance of invertebrate and plant species, commonly used in standard ecotoxicological assays, was not compromised by both soil properties and soil metal contents. The results obtained suggest that the PTRS1 can be used as a natural reference soil in ecotoxicological assays carried out under the scope of ecological risk assessment.     

Biological activities of the essential oil from the leaves of Lantana montevidensis (Spreng) Briq. in mice

Environment, Development and Sustainability - This work aimed to analyze the chemical composition and evaluate the anti-inflammatory and antinociceptive properties of the essential oil obtained...     

Socialist hydropower governances compared: dams and resettlement as experienced by Dai and Thai societies from the Sino-Vietnamese borderlands

Regional Environmental Change - Research on hydropower development has shown that a diversity of social and environmental impacts of dams is distributed unevenly among various state and corporate...     

Effect of Poly(Vinyl Acetate) on Mechanical Properties and Characteristics of Poly(Lactic Acid)/Natural Rubber Blends

Natural rubber grafted with poly(vinyl acetate) copolymer (NR-g-PVAc) was synthesized by emulsion polymerization. Three graft copolymers were prepared with different PVAc contents: 1 % (G1), 5 % (G5) and 12 % (G12). Poly(lactic acid) (PLA) was melt blended with natural rubber (NR) and/or NR-g-PVAc in a twin screw extruder. The blends contained 10–20 wt% rubber. The notched Izod impact strength and tensile properties were determined from the compression molded specimens. The effect of NR mastication on the mechanical properties of the PLA/NR/NR-g-PVAc blend was evaluated. Characterization by DMTA and DSC showed an enhancement in miscibility of the PLA/NR-g-PVAc blend. The temperature of the maximum tan δ of the PLA decreased with increasing PVAc content in the graft copolymer, i.e., from 71 °C (pure PLA) to 63 °C (the blend containing 10 % G12). The increase in miscibility brought about a reduction in the rubber particle diameter. These changes were attributed to the enhancement of toughness and ductility of PLA after blending with NR-g-PVAc. Therefore, NR-g-PVAc could be used as a toughening agent of PLA and as a compatibilizer of the PLA/NR blend. NR mastication was an efficient method for increasing the toughness and ductility of the blends which depended on the blend composition and the number of mastications.     

Composting of wastewater treatment sludge with different bulking agents

The main objectives of this study were to investigate the compostability of wastewater treatment sludge (WTS) containing different bulking agents (BAs) and to determine the most efficient BA. Four different compost trials consisting of mixtures of wheat straw (WS), plane leaf (PL), corncob (CC) and sunflower stalk (SS) with WTS were performed in laboratory reactors. In all experiments, a mixture of 60% WTS and 40% BA (wet basis) was used. The temperature, dry matter (DM), organic matter (OM), pH, electrical conductivity (EC) and C/N ratio were monitored during the composting process. Evaluation of the operational parameters showed that the highest organic matter degradation (i.e. 37.6%), loss of dry matter (i.e. 29.6%) and temperature (i.e. 64 °C) were achieved for the WTS-CC mixtures. Results also showed that the WTS-SS mixture was also successful in terms of these operational parameters. Use of bulking agents for the treatment of wastewater treatment sludge in composting process is an important issue with regards to process efficiency, economy and disposal of agricultural waste. Corncob and sunflower stalk that were previously not used for the composting of WTS from food industry were shown to be highly successful BA materials in this study.

Implications: The compostability of wastewater treatment sludge from the food industry with different bulking agents was studied. Wheat straw, plane leaf, corncob, and sunflower stalk were used as bulking agents. The required microbial stabilization and degree of mineralization were achieved with corncobs and sunflower stalks.     

A new device for formaldehyde and total aldehydes real-time monitoring

A new sensitive technique for the quantification of formaldehyde (HCHO) and total aldehydes has been developed in order to monitor these compounds, which are known to be involved in air quality issues and to have health impacts. Our approach is based on a colorimetric method where aldehydes are initially stripped from the air into a scrubbing solution by means of a turning coil sampler tube and then derivatised with 3-methylbenzothiazolinone-2-hydrazone in acid media (pH?=??0.5). Hence, colourless aldehydes are transformed into blue dyes that are detected by UV–visible spectroscopy at 630 nm. Liquid core waveguide LCW Teflon® AF-2400 tube was used as innovative optical cells providing a HCHO detection limit of 4 pptv for 100 cm optical path with a time resolution of 15 min. This instrument showed good correlation with commonly used techniques for aldehydes analysis such as DNPH derivatisation chromatographic techniques with off-line and on-line samplers, and DOAS techniques (with deviation below 6 %) for both indoor and outdoor conditions. This instrument is associated with simplicity and low cost, which is a prerequisite for indoor monitoring.     

A national reconnaissance for selected organic micropollutants in sediments on French territory

To collect a large data set regarding the occurrence of organic substances in sediment, this study presents the examination of 20 micropollutants, as a national survey. The list of target compounds contains two alkylphenols, three polycyclic aromatic hydrocarbons (PAHs) not commonly included in monitoring programmes, six pesticides or metabolites, five pharmaceutical compounds, two hormones, one UV filter and bisphenol A. The selective and sensitive analytical methods, based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) sample preparation followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) or gas chromatography-time-of-flight mass spectrometry (GC-ToF-MS), allow the quantification at limits comprised between 0.5 and 23 ng/g, depending on the compound. The paper summarizes the analytical results from 154 sampling points. Of the 20 target compounds, 9 were determined at least once, and the sediments contained a maximum of 7 substances. The most frequently detected were PAHs (frequency, 77 %; max., 1,400 ng/g). The pharmaceutical compounds, hormones and pesticides were rarely detected in the samples; the most frequently detected was carbamazepine (frequency, 6 %; max., 31 ng/g). In some cases, the levels of PAHs and bisphenol A exceed the predicted no-effect concentration (PNEC) values.     

Aid in a city at war: the case of Mogadishu, Somalia

Mogadishu, the capital of Somalia, has been central to life, war, and peace in the country for almost two decades. Its urban characteristics, though, have been put to one side for the most part. In recent years, Mogadishu-related issues have been merged mostly into a global agenda for South and Central Somalia, resulting in the technical and coordination approaches employed in the city largely being reproductions of solutions utilised in refugee camps and rural areas. Unfortunately, urban problems require urban solutions. The aid system is just starting to discover how specific aid in cities at war should be, both from an organisational and a technical standpoint. The enhancement of aid practices in an urban setting implies, among other things, a more strategic approach to the specific spatial characteristics of the city, a more fine-tuned analysis of the technical requirements of the urban service delivery systems, and a better understanding of the role of urban institutions.