Effect of Poly(Vinyl Acetate) on Mechanical Properties and Characteristics of Poly(Lactic Acid)/Natural Rubber Blends

Natural rubber grafted with poly(vinyl acetate) copolymer (NR-g-PVAc) was synthesized by emulsion polymerization. Three graft copolymers were prepared with different PVAc contents: 1 % (G1), 5 % (G5) and 12 % (G12). Poly(lactic acid) (PLA) was melt blended with natural rubber (NR) and/or NR-g-PVAc in a twin screw extruder. The blends contained 10–20 wt% rubber. The notched Izod impact strength and tensile properties were determined from the compression molded specimens. The effect of NR mastication on the mechanical properties of the PLA/NR/NR-g-PVAc blend was evaluated. Characterization by DMTA and DSC showed an enhancement in miscibility of the PLA/NR-g-PVAc blend. The temperature of the maximum tan δ of the PLA decreased with increasing PVAc content in the graft copolymer, i.e., from 71 °C (pure PLA) to 63 °C (the blend containing 10 % G12). The increase in miscibility brought about a reduction in the rubber particle diameter. These changes were attributed to the enhancement of toughness and ductility of PLA after blending with NR-g-PVAc. Therefore, NR-g-PVAc could be used as a toughening agent of PLA and as a compatibilizer of the PLA/NR blend. NR mastication was an efficient method for increasing the toughness and ductility of the blends which depended on the blend composition and the number of mastications.     

An alternative supercritical fluid extraction system for aqueous matrices and its application in pesticides residue analysis

Abstract

Supercritical fluid extraction (SFE) is a rapid and convenient method for the isolation of organic compounds from environmental samples. This paper describes a supercritical carbon dioxide (CO₂) extraction system that uses a newly designed extraction cell to recover organic compounds from an aqueous matrix. Analysis of the extracts by gas chromatography‐electron capture detector (GC‐ECD) indicated that the herbicide trifluralin (2,6‐dinitro‐N,N‐dipropyl‐4‐trifluoromethylaniline) could be quantitatively extracted by using the SFE system proposed with small amounts of sample. The percentage of recovery obtained with the SFE system described was twice as high as the result obtained using a conventional solid‐phase extraction technique. Extraction by SFE was completed in a short period of time using a simple and low‐cost home‐made system that did not require the use of organic solvents.     

Analytical methods for the determination of alachlor,metolachlor, simazine and atrazine mobility in soils

Abstract

A method for the determination of the mobility of the herbicides, alachlor, metolachlor, simazine and atrazine in soil is described . The method is based on the use of soil thin‐layer chromatography (TLC) and does not require the use of radiolabelled compounds. Soil on the TLC plate after development was separated into various bands, the material in each band was extracted with solvents and analyzed by gas chromatography.     

Using landsat data to determine land use/land cover changes in Samsun, Turkey

The rapid industrialization and urbanization of an area require quick preparation of actual land use/land cover (LU/LC) maps in order to detect and avoid overuse and damage of the landscape beyond sustainable development limits. Remote sensing technology fits well for long-term monitoring and assessment of such effects. The aim of this study was to analyze LU/LC changes between 1980 and 1999 in Samsun, Turkey, using satellite images. Three Landsat images from 1980, 1987 and 1999 were used to determine changes. A post classification technique was used based on a hybrid classification approach (unsupervised and supervised). Images were classified into six LU/LC types; urban, agriculture, dense forest, open forest-hazelnut, barren land and water area. It is found that significant changes in land cover occurred over the study period. The results showed an increase in urban, open forest/hazelnut, barren land and water area and a decrease in agriculture and dense forest in between 1980 and 1999. In this period, urban land increased from 0.77% to 2.47% of the total area, primarily due to conversions from agricultural land and forest to a lesser degree. While the area of dense forest decreased from 41.09% to 29.64% of the total area, the area of open forest and hazelnut increased from 6.73% to 11.88%.     

Copper, zinc and lead speciation in salt marsh sediments colonised by Halimione portulacoides and Spartina maritima

Total concentrations and fractionation of Cu, Zn and Pb in seven operationally defined phases (exchangeable, carbonates, manganese oxides, organic complexes, amorphous iron oxides, crystalline iron oxides and residual) were determined in sediments colonised by the halophyte species Halimione portulacoides and Spartina maritima in a Tagus estuary salt marsh (Portugal). We aimed to determine whether the speciation of these metals was different in areas colonised by each halophyte. Higher concentrations of Cu, Zn and, in particular Pb, were found in the rhizosphere of S. maritima than in the root sediments of H. portulacoides. Geochemical fractionation of Cu, Zn and Pb in sediments of the salt marsh depended upon the metal, and for Zn and Pb clearly varied with depth and with the colonising species. The higher redox potential observed in sediments colonised by H. portulacoides may in part explain the observed differences in the speciation of Cu, Zn and Pb.     

Chromium and nickel mobilization from a contaminated soil using chelants

The mobilization of chromium and nickel from an industrial soil was investigated using two biodegradable chelants (citric acid and histidine), compared with a persistent one (ethylenediaminetetraacetic acid). Successive metal mobilizations were carried out in batch experiments. The main reactions involved were estimated by modeling the system with MINEQL+. For a single mobilization, citric acid was the most effective for Cr mobilization and EDTA for Ni. Their effectiveness could be explained by their ability to solubilize the mineral matrix and by the competition for the surfaces sites to desorb Cr(VI). Before and after the mobilizations, the distribution of metals was determined by a sequential extraction procedure. Only slight modifications were observed due to the low percentage of solubilized metal. A concentration of 0.05 mol L(-1) (citric acid and EDTA) allows a good compromise between metal mobilization and preservation of the soil mineral integrity.     

Fluorescence and DOC contents of estuarine pore waters from colonized and non-colonized sediments: effects of sampling preservation

The influence of the colonization of salt marsh sediments with Halimione portulacoides was evaluated by analysing the fluorescent dissolved organic matter (FDOM) in sediment pore waters from a salt marsh at different depths. Cores of sediments at colonized and non-colonized sites were collected from a coastal lagoon (Ria de Aveiro, Portugal). The DOC content of extracted pore waters was determined and characterized by synchronous molecular fluorescence (Deltalambda=60nm) and UV-visible spectroscopies. The common practice of freezing sediment cores for further and later chemical investigation was shown not to be an appropriate methodology of sample preservation. On the contrary, freezing of extracted and filtered pore water seemed not to affect either the DOC content or the fluorescence properties of pore waters. Two types of fluorescent substances were found in the pore waters spectra; one corresponding to humic-like substances and another one resembling proteins. However, major differences were found in the spectra of pore waters depending on both depth and the presence/absence of vegetation colonization.     

Assessment of a sewage sludge treatment on cadmium, copper and zinc bioavailability in barley, ryegrass and earthworms

The toxicity and bioavailability of metals were assessed to verify the efficiency of a new chemical leaching process (METIX-AC) to minimize the risk of metals found in municipal sewage sludge. For this purpose, sludge samples were spiked with cadmium, copper and/or zinc before being treated using METIX-AC. The sludge decontamination resulted in a removal of spiked metals (79-89%), in a decrease of the more labile fractions, and in a corresponding increase of the residual fraction. The toxicity observed after exposure of two plant species, barley (Hordeum vulgare) and ryegrass (Lolium perenne), and a terrestrial invertebrate, Eisenia andrei, to sludge-soil mixtures, disappeared after treatment, although the adverse effects were minor before treatment. The sludge treatment also significantly decreased the bioaccumulation of cadmium, copper, and zinc in the exposed species. For cadmium, maximum tissue concentrations of 0.45+/-0.08 mg/kg in barley, 0.79+/-0.27 mg/kg in ryegrass, and 21.82+/-1.85 mg/kg in earthworm exposed to sludge before treatment decreased after treatment to values similar to those observed with negative controls.     

Heavy metal removal from synthetic wastewaters in an anaerobic bioreactor using stillage from ethanol distilleries as a carbon source

This work was conducted to investigate the possibility of using stillage from ethanol distilleries as substrate for sulfate reducing bacteria (SRB) growth and to evaluate the removal efficiency of heavy metals present in wastewaters containing sulfates. The experiments were carried out in a continuous bench-scale Upflow Anaerobic Sludge Blanket reactor (13 l) operated with a hydraulic retention time of 18 h. The bioreactor was inoculated with 7 l of anaerobic sludge. Afterwards, an enrichment procedure to increase SRB numbers was started. After this, cadmium and zinc were added to the synthetic wastewater, and their removal as metal sulfide was evaluated. The synthetic wastewater used represented the drainage from a dam of a metallurgical industry to which a carbon source (stillage) was added. The results showed that high percentages of removal (>99%) of Cd and Zn were attained in the bioreactor, and that the removal as sulfide precipitates was not the only form of metal removal occurring in the bioreactor environment.