Meiofaunal cryptic species revealed by confocal microscopy: the case of Xenotrichula intermedia (Gastrotricha)

The phylum Gastrotricha includes about 750 species of meiobenthic marine and freshwater species that are often widely distributed. The microscopic size, short life cycle, low motility of adults, and the absence of larval stages normally required for dispersal raise doubts about the putative cosmopolitan distribution of many of gastrotrich species. The phenomenon of cosmopolitanism is acknowledged for all major meiobenthic taxa (“the meiofauna paradox”) and can be explained, at least in part, with the existence of sibling species, so far identified primarily by molecular analysis. In this paper, we report the discovery of sibling species in the marine chaetonotidan Xenotrichula intermedia using confocal laser scanning microscopy (CLSM). A total of 40 specimens collected from two geographically separate populations, the Mediterranean (Adriatic Sea) and the Arabian Gulf (Kuwait), were investigated. Fifteen specimens of each population were studied in vivo with a contrast interference microscope (DIC) in order to obtain the main morphometric parameters; ten other animals (five in each population) were fixed and marked with fluorescent phalloidin for the observation of their muscular systems under CLSM. The metrics and meristic data of the two populations fall within the range of measures recognized for the species. Pairwise comparisons (t-test) in general did not reveal statistically significant differences between the traits of specimens belonging to the two populations; moreover, multivariate analyses (cluster- and MDS analysis) were unable to separate clearly the Mediterranean from the Arabian specimens. In contrast, an examination of their muscular systems revealed clear dissimilarities between the two geographic groups. In particular, while the Italian specimens possessed incomplete circular bands and dorsoventrally orientated muscles that are partially inserted into the basal lamina of the cuticle, in both splanchnic- and somatic positions, their Arabian counterparts showed partial dorsoventral bands and complete circular muscles that surround the entire body of the animal in the same corresponding positions. Additional differences in the position of helicoidal bands (present in a more anterior location in the Italian specimens) are noted between Mediterranean and Arabian specimens. Since the investigated animals share a similar interstitial habitat, a working hypothesis connects the differences in the musculature to possible differences in the reproductive modality of specimens between the two populations.     

Motility of cryopreserved spermatozoa for the ecotoxicological evaluation of aquatic environments

A new approach to environmental studies was investigated by the authors, who propose the use of cryopreserved biological systems in ecotoxicological bioassays. The feasibility of spermiotoxicity tests using cryopreserved semen of the sea bream Sparus aurata, with sperm motility parameters as the endpoint, was evaluated. Thawed sperm was incubated in environmental samples (sediment elutriate and dumpsite leachate) and in a reference toxicant (cadmium) at scaled concentrations. Motility was then evaluated by video-microscopy using both visual and computer-assisted analyses. Activation time, sperm motility and velocity and motility duration were assessed on thawing and at the end of the incubation time, and the difference with respect to the control was statistically evaluated. All the endpoints of the bioassay proved to have good sensitivity even at the highest dilutions of the tested matrices. Observed differences in the sensitivity thresholds of the endpoints were considered to be representative of different aspects of sperm physiology. Therefore the proposed bioassay is a promising starting point for the development of toxicity tests that are increasingly tailored to the needs of ecotoxicology and environmental quality evaluation strategies for aquatic environments.     

Effects of nano carbon black and single-layer graphene oxide on settlement,survival and swimming behaviour of Amphibalanus amphitrite larvae

The effects of two carbon-based nanomaterials, nano-sized carbon black (nCB), and single-layer graphene oxide (GO) on settlement of Amphibalanus amphitrite (Cirripedia, Crustacea) cypris larvae (cyprids) were assessed after 24, 48, and 72 h of exposure. Additionally, the effects of these nanomaterials on the mortality and swimming behaviour of the nauplius larvae (nauplii) of the same organism were determined after 24 and 48 h. The data indicate that nCB is more effective as a potential antisettlement agent than single-layer GO; moreover, nCB did not show any adverse effects on the larvae. The swimming behaviour of II stage nauplii of A. amphitrite exposed to a suspension of nCB was inhibited only at very high nCB concentrations (≥0.5 mg/mL). Single-layer GO, on the contrary, showed lower antisettlement effects and was more active in altering the survival and inhibiting the swimming behaviour of the nauplii. An indication of the toxic or non-toxic mechanisms of the antisettlement properties of both of these nanomaterials is provided by the reversibility of the antisettlement activity. In conclusion, we propose nCB as an innovative antifouling nanomaterial that shows low toxicity towards the model organism (crustaceans) used in this study.     

The self‐built ecovillage in L'Aquila,Italy: community resilience as a grassroots response to environmental shock

The paper applies the community resilience approach to the post‐disaster case of Pescomaggiore, an Italian village affected by the L'Aquila earthquake in 2009. A group of residents refused to accept the housing recovery solutions proposed by the government, opting for autonomous recovery. They developed a housing project in the form of a self‐built ecovillage, characterised by earthquake‐proof buildings made of straw and wood. The project is a paradigmatic example of a community‐based response to an external shock. It illustrates the concept of ‘community resilience’, which is widely explored in the scientific debate but still vaguely defined. Based on qualitative methodologies, the paper seeks to understand how the community resilience process can be enacted in alternative social practices such as ecovillages. The goal is to see under which conditions natural disasters can be considered windows of opportunity for sustainability.     

Potential disruptive effects of copper-based antifouling paints on the biodiversity of coastal macrofouling communities

Environmental Science and Pollution Research - The expanded use of copper(I)-based antifouling paints (AF) has increased copper leaching into coastal environments, requiring attention and...     

Metal Contamination in Urban Soils of Coastal Tuscany (Italy)

Urban soils are often contaminated by metals deriving from human activities. Urban polluted soils can affect human health through direct physical contact or through the food chain. The behaviour of metals is affected by chemical and physical soil properties. Heavy metal concentration was determined in some soils of three medium sized towns of coastal Tuscany, Central Italy. Soil samples were collected in roadsides, urban agricultural soils (allotments), playgrounds and public parks. The analysis included total metal content (Pb, Cu, Zn, Ni, Cd), and sequential extraction. Lead reached the highest levels in the soils and was higher near roads. In urban agricultural soils and in allotments Cu was present in noticeable quantities (300 mg kg⁻¹). The presence of Cu in urban soils seems to be typical of soils used for a long period as agricultural land, especially vineyards in the area covered by this study. Sequential extraction was performed to evaluate the mobility of the metals and to better understand the impact of the anthropogenic activity on urban sites. In the present study principal components analysis (PCA) is employed to describe the characteristics of urban soils.     

Interpretation of ground-level ozone episodes with atmospheric stability index measurement

Purpose

This paper presents a novel approach to interpret ground-level O₃ with the measured atmospheric stability index (ASI).

Methods

O₃ concentrations were monitored by automatic analysers at three types of stations: traffic site, residential site and regional background site in 2005, and the ASI was simultaneously measured by observing radon and its short-lived decay products.

Results

The observed results showed a clear annual variation of O₃ concentrations with a maximum in spring, relatively high at the regional background site over 120?ppb, and lower at the residential and traffic sites at about 70?ppb. ASI gives information about the dilution properties of the lower boundary layer and allows to highlight the relevant role of the dilution factor in determining atmospheric pollution events. We demonstrated the analysis of O₃ night peak episodes with vertical wind and ASI.

Conclusions

With the advantage of ASI and vertical wind profiles, it was possible to isolate particular photochemical pollution phenomena of O₃ peaks from the free troposphere reservoir or formed by local reactions. This shows that the index constitutes a powerful and valuable tool for describing O₃ night-peak episodes at background station.     

Characterization, Fluxes and Toxicity of Leather Tanning Bath Chemicals in a Large Tanning District Area (IT)

The leather tanning industry is perceived as responsible of a significant consume of natural resources and output of wastes such as high concentration of organics, salts and heavy metals such as chromium, both in solid and liquid form as a result. Now as ever the future of tanneries strongly depends on the increase of their awareness that a sustainable industry for the future means embracing a forward-looking philosophy of the leather making process through optimal resource management within the tannery. This study reports the characterization of some chemicals used in a large tanning district area in terms of COD, BOD, aromaticity (UV₂₈₀) and double bond (UV₂₅₄) absorbance measurements, toxicity on fresh and saline water as well as terrestrial species, GC-MS scanning. The study provides a consistent set of information on tannin-associated concentration-related trends and suggests novel criteria in defining control quality for evaluating environmental impact of leather tanning industry.     

Antioxidant activity shown by olive pomace extracts

In this study, the effects of experimental variables such as type of solvent, sample/solvent ratio, and time of extraction have been evaluated to individuate the best results in phenolic recovery by Olive Pomaces (OP) belonging to Carolea and Ottobratica cultivars. Folin–Ciocaulteu procedure and DPPH and ABTS assays were used, respectively, for total phenol quantification and total antioxidant activity of pomace extracts. The ethanol/water mixture was resulted the most efficient extraction solvent for both olive cultivars. The highest amount of phenolic compounds (171 ± 4 mg of gallic acid 100 g^?1 of dry pomace) was obtained after extraction at 120 min with 2:1 solvent/OP (v/w) of Ottobratica Olive Pomace. The recovery of phenol compounds from olive wastes increases the sustainability of sector, allowing obtaining an extract that could be a suitable alternative in the food industry to the use of synthetic antioxidants in order to improve the quality of foods.     

Implementing Criteria and Indicators for Sustainable Forest Management in a Decentralized Setting: Italy as a Case Study

The study explored the sub-national implementation of the Pan-European Criteria and Indicators (C&I) for Sustainable Forest Management in Italy, based on the statistical analysis of answers to a questionnaire provided by representatives of the Italian sub-national forest administrations. The questionnaire explored the implementation of C&I in five applications and through the analytical lenses of ‘suitability of C&I to sub-national contexts’ and ‘adaptability of administrations to C&I’. The analysis of suitability and adaptability made it possible to identify and compare challenges in, and successful experiences with, the implementation of C&I, which were then used to formulate recommendations aimed at encouraging implementation and promoting academic and policy debate. The study reveals that C&I were implemented to a moderate extent. This level of implementation was determined most of all by the suitability of C&I to the Italian sub-national contexts, and less by the adaptability of administrations. Recommendations to foster implementation of and dialogue on C&I include the need for Italian sub-national administrations to transpose the Pan-European C&I into sub-national sets tailored to local circumstances by, for example, modifying existing C&I or integrating these into new customized indicator sets.