Volatile nanoparticle formation and growth within a diluting diesel car exhaust

A major source of particle number emissions is road traffic. However, scientific knowledge concerning secondary particle formation and growth of ultrafine particles within vehicle exhaust plumes is still very limited. Volatile nanoparticle formation and subsequent growth conditions were analyzed here to gain a better understanding of "real-world" dilution conditions. Coupled computational fluid dynamics and aerosol microphysics models together with measured size distributions within the exhaust plume of a diesel car were used. The impact of soot particles on nucleation, acting as a condensational sink, and the possible role of low-volatile organic components in growth were assessed. A prescribed reduction of soot particle emissions by 2 orders of magnitude (to capture the effect of a diesel particle filter) resulted in concentrations of nucleation-mode particles within the exhaust plume that were approximately 1 order of magnitude larger. Simulations for simplified sulfuric acid-water vapor gas-oil containing nucleation-mode particles show that the largest particle growth is located in a recirculation zone in the wake of the car. Growth of particles within the vehicle exhaust plume up to detectable size depends crucially on the relationship between the mass rate of gaseous precursor emissions and rapid dilution. Chassis dynamometer measurements indicate that emissions of possible hydrocarbon precursors are significantly enhanced under high engine load conditions and high engine speed. On the basis of results obtained for a diesel passenger car, the contributions from light diesel vehicles to the observed abundance of measured nucleation-mode particles near busy roads might be attributable to the impact of two different time scales: (1) a short one within the plume, marked by sufficient precursor emissions and rapid dilution; and (2) a second and comparatively long time scale resulting from the mix of different precursor sources and the impact of atmospheric chemistry.     

Antenatal diagnosis of a de novo paracentric inversion of chromosome 11

A de novo paracentric inversion of chromosome 11 identified through antenatal diagnosis is described along with long-term follow-up information on the child and discussion of reported experiences with de novo inversions.     

Chemical Leasing business models and corporate social responsibility

Chemical Leasing is a service-oriented business model that shifts the focus from increasing sales volume of chemicals towards a value-added approach. Recent pilot projects have shown the economic benefits of introducing Chemical Leasing business models in a broad range of sectors. A decade after its introduction, the promotion of Chemical Leasing is still predominantly done by the public sector and international organizations. We show in this paper that awareness-raising activities to disseminate information on this innovative business model mainly focus on the economic benefits. We argue that selling Chemical Leasing business models solely on the grounds of economic and ecological considerations falls short of branding it as a corporate social responsibility initiative, which, for this paper, is defined as a stakeholder-oriented concept that extends beyond the organization’s boundaries and is driven by an ethical understanding of the organization’s responsibility for the impact of its business activities. For the analysis of Chemical Leasing business models, we introduce two case studies from the water purification and metal degreasing fields, focusing on employees and local communities as two specific stakeholder groups of the company introducing Chemical Leasing. The paper seeks to demonstrate that Chemical Leasing business models can be branded as a corporate social responsibility initiative by outlining the vast potential of Chemical Leasing to improve occupational health and safety and to strengthen the ability of companies to protect the environment from the adverse effects of the chemicals they apply.     

Effect of steam hydration on performance of lime sorbent for CO2 capture

Lime is considered a feasible sorbent for the capture of CO₂ from large stationary sources. The positive attributes of a natural source material, low cost and lack of harmful by-products are offset by rapid deterioration in performance and high regeneration temperature. Performance can be improved by hydrating the lime using steam. We investigate a steam hydration process wherein lime is hydrated for 5 min at 300 °C and atmospheric pressure in a mixture of steam and CO₂. The experiments consisted of 10 capture cycles with 60% of the lime active at the end. Extrapolation using a decay model suggests a residual carbonation level of 48%, significantly higher than the 8% achieved by dry lime cycles. The cost of replacement sorbent under these conditions is less than $1/t of CO₂ captured. The hydrated lime process also reduces the thermal load, for heating and cooling, by half as well as the inventory, and therefore solids handling, by a factor 5 over dry lime. The introduction of the hydration reaction provides another exothermic reaction for heat management.     

Forest ecosystems and the changing patterns of nitrogen input and acid deposition today and in the future based on a scenario

A global assessment of the impact of the anthropogenic perturbation of the nitrogen and sulfur cycles on forest ecosystems is carried out for both the present-day [1980-1990] and for a projection into the future [2040-2050] under a scenario of economic development which represents a medium path of development according to expert guess [IPCC IS92a]. Results show that forest soils will receive considerably increasing loads of nitrogen and acid deposition and that deposition patterns are likely to change. The regions which are most prone to depletion of soils buffering capacity and supercritical nitrogen deposition are identified in the subtropical and tropical regions of South America and Southeast Asia apart from the well known 'hotspots' North-Eastern America and Central Europe. The forest areas likely to meet these two risks are still a minor fraction of the global forest ecosystems, though. But the bias between eutrophication and acidification will become greater and an enhanced growth triggered by the fertilizing effects of increasing nitrogen input cannot be balanced by the forest soils nutrient pools. Results show increasing loads into forest ecosystems which are likely to account for 46% higher acid loads and 36% higher nitrogen loads in relation to the 1980-1990 situation. Global background deposition of up to 5 kg N ha-1 a-1 will be exceeded at more than 25% of global forest ecosystems and at more than 50% of forest ecosystems on acid sensitive soils. More than 33% of forest ecosystems on acid sensitive soils will receive acid loads which exceeds their buffering capacity. About 25% of forest areas with exceeded acid loads will receive critical nitrogen loads.     

Ansätze zur regionalen Quantifizierung von Methan aus Pflanzen

Background

Methane as a gas influencing our climate is of high importance according to the Kyoto-Protocol. The more precisely we can determine anthropogenic and biogenic sources, the more effective measures we can take to reduce the gas. Direct emission of methane from plants apparently contributes significantly to the total emission but has not been accounted for in emission balances until now.

Methods

A model was created to calculate methane emission for a short time period in regional resolution for Lower Austria and to relate the results to known literature.

Results and Discussion

First model results suggest that the amount of methane released from plants in relation to emissions from other known sources are of importance.

Perspectives

The uncertainties associated with both measurements and quantification require reduction by further research.     

Studies on metal content in the brown seaweed, Fucus vesiculosus, from the Archipelago of Stockholm

Concentrations of eleven metals (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn) were determined in the brown seaweed Fucus vesiculosus collected from the Archipelago of Stockholm. Several factors which influence the metal content in the seaweed have been studied, including errors caused by epiphytes, sea exposure and differences depending on which part of the seaweed is analysed. It is concluded that, if all these factors are considered, Fucus vesiculosus plants are excellent bio-indicators of metal pollution. This is also demonstrated by a significant increase in metal content in transplanted Fucus vesiculosus near the city of Stockholm. The results from this investigation also indicate increasing metal concentrations, especially Cd, in samples from the northern parts of the Archipelago and the reason for this is discussed.     

A risk-based screening approach for prioritizing contaminants and exposure pathways at Superfund sites

Contamination at Superfund sites can involve mixtures of chemicals and radionuclides in a variety of environmental media. Determining priorities for evaluation and remediation of various contaminants is an important part of the initial phases of any site investigation. An effective screening analysis at the beginning of the project can help by identifying both those situations in need of immediate remedial attention and those which require further sampling and evaluation. The screening approach discussed here is made up of two sets of calculations designed to provide upper- and lower-bound estimates of health risk to individuals likely to receive the highest exposures. This approach allows rapid identification of contaminants which pose a negligible risk and can be assigned a low priority for remedial attention or which pose a substantial risk and should be given the highest priority for appropriate remediation efforts. Contaminants designated as neither high- nor low-priority should be investigated in more detail prior to making decisions regarding the need for or method of remediation. The utility of this approach has already been demonstrated in the evaluation of contamination in the Clinch and Tennessee River systems originating from historical operations of atomic weapons and energy research facilities near Oak Ridge, Tennessee.     

Effects of experience and avpr1a microsatellite length on parental care in male prairie voles (Microtus ochrogaster)

Pair-bonded males often make substantial contributions to the care of their offspring. Male parental behavior may be affected by a range of factors, including previous experience (parental or alloparental), genetic influences, and contributions by the female partner. Previous studies have shown that a microsatellite polymorphism in the regulatory region of the avpr1a gene influences aspects of paternal behavior in male prairie voles (Microtus ochrogaster). Specifically, males with longer avpr1a microsatellites groomed offspring more than did males with shorter avpr1a microsatellites. Previous experience with alloparental care also appears to influence subsequent paternal care in prairie voles. We investigated the influence of avpr1a microsatellite length and previous parental experience on paternal behavior in prairie voles two generations from the field and specially bred to exaggerate differences in avpr1a microsatellite length. We found that avpr1a microsatellite length alone did not affect any of the paternal behaviors that we measured. In contrast, males differed in parental behavior between first and second litters. Regardless of avpr1a microsatellite length, males licked/groomed the second litter less, and retrieved pups more quickly during the second compared to the first litter. Our results show that previous paternal experience may play a more important role than the length of the microsatellite in the regulatory region of the avpr1a gene in influencing paternal care.