Influence of Oxygenated Fuels on the Emissions from Three Pre-1985 Light-Duty Passenger Vehicles

Tailpipe and evaporative emissions from three pre-1985 passenger motor vehicles operating on an oxygenated blend fuel and on a nonoxygenated base fuel were characterized. Emission data were collected for vehicles operating over the Federal Test Procedure at 40,75, and 90°F to simulate ambient driving conditions. The two fuels tested were a commercial summer grade regular gasoline (the nonoxygenated base fuel) and an oxygenated fuel containing 9.5 percent methyl tert-butyl ether (MTBE), more olefins, and fewer aromatics than the base fuel. The emissions measured were total hydrocarbons (THCs), speciated hydrocarbons, speciated aldehydes, carbon monoxide (CO), oxides of nitrogen (NO_x), benzene, and 1,3-butadiene.

This study showed no pattern of tailpipe regulated emission reduction when oxygenated fuel was used. Tailpipe emissions from the 1984 Buick Century without a catalyst and the 1977 Mustang with catalyst decreased with the MTBE fuel. However, emissions from the 1984 Buick Century and the 1980 Chevrolet Citation, both fitted with catalysts increased. The vehicles emitted more 1,3- butadiene and, in general, more NO_x when operated with the base fuel.

THC, CO, benzene, and 1,3-butadiene emissions from both fuels and all vehicles, in general, decreased with increasing test temperature, whereas NO_x emissions, in general, increased with increasing test temperature. Formaldehyde, acetaldehyde, and total aldehydes also showed a decrease in emissions as test temperature increased. More formaldehyde was emitted when the MTBE fuel was used.

Evaporative, diurnal, and hot soak emissions from the base fuel were greater than those from the MTBE fuel. The evaporated emissions from both fuels increased with increasing test temperatures. Diurnal data indicate that canister conditioning (bringing the evaporative charcoal canister to equilibrium) is required before testing.     

Inspired to perform: A multilevel investigation of antecedents and consequences of thriving at work

Emerging research evidence across multiple industries suggests that thriving at work is critically important for creating sustainable organizational performance. However, we possess little understanding of how factors across different organizational levels stimulate thriving at work. To address this gap, the current study proposes a multilevel model that simultaneously examines contextual and individual factors that facilitate thriving at work and how thriving relates to positive health and overall unit performance. Analysis of data collected from 275 employees, at multiple time periods, and their immediate supervisors, representing 94 work units, revealed that servant leadership and core self‐evaluations are 2 important contextual and individual factors that significantly relate to thriving at work. The results further indicated that thriving positively relates to positive health at the individual level, with this relationship partially mediated by affective commitment. Our results also showed that collective thriving at work positively relates to collective affective commitment, which in turn, positively relates to overall unit performance. Taken together, these findings suggest that work context and individual characteristics play significant roles in facilitating thriving at work and that thriving is an important means by which managers and their organizations can improve employees' positive health and unit performance.     

A call for longitudinal research in positive organizational behavior

After defining and providing the current status of psychological capital (PsyCap), we address the need to better understand its stability (i.e., state vs. trait). Specifically, we issue a call for longitudinal research. The balance of this “incubator” article examines the relevance, potential obstacles, and advantages of this design in meeting PsyCap's future research needs. Copyright © 2008 John Wiley & Sons, Ltd.     

Field-scale effective matrix diffusion coefficient for fractured rock: results from literature survey

Matrix diffusion is an important mechanism for solute transport in fractured rock. We recently conducted a literature survey on the effective matrix diffusion coefficient, D_m^e, a key parameter for describing matrix diffusion processes at the field scale. Forty field tracer tests at 15 fractured geologic sites were surveyed and selected for the study, based on data availability and quality. Field-scale D_m^e values were calculated, either directly using data reported in the literature, or by reanalyzing the corresponding field tracer tests. The reanalysis was conducted for the selected tracer tests using analytic or semi-analytic solutions for tracer transport in linear, radial, or interwell flow fields. Surveyed data show that the scale factor of the effective matrix diffusion coefficient (defined as the ratio of D_m^e to the lab-scale matrix diffusion coefficient, D_m, of the same tracer) is generally larger than one, indicating that the effective matrix diffusion coefficient in the field is comparatively larger than the matrix diffusion coefficient at the rock-core scale. This larger value can be attributed to the many mass-transfer processes at different scales in naturally heterogeneous, fractured rock systems.Furthermore, we observed a moderate, on average trend toward systematic increase in the scale factor with observation scale. This trend suggests that the effective matrix diffusion coefficient is likely to be statistically scale-dependent. The scale-factor value ranges from 0.5 to 884 for observation scales from 5 to 2000 m. At a given scale, the scale factor varies by two orders of magnitude, reflecting the influence of differing degrees of fractured rock heterogeneity at different geologic sites. In addition, the surveyed data indicate that field-scale longitudinal dispersivity generally increases with observation scale, which is consistent with previous studies. The scale-dependent field-scale matrix diffusion coefficient (and dispersivity) may have significant implications for assessing long-term, large-scale radionuclide and contaminant transport events in fractured rock, both for nuclear waste disposal and contaminant remediation.     

Simulating Unstressed Crop Development and Growth Using the Unified Plant Growth Model (UPGM)

Since initial development of the EPIC model in 1989, the EPIC plant growth component has been incorporated into other erosion and crop management models (e.g., WEPS, WEPP, SWAT, ALMANAC, and GPFARM) and subsequently modified to meet research objectives of the model developers. This has resulted in different versions of the same base plant growth component. The objectives of this study are the following: (1) describe the standalone Unified Plant Growth Model (UPGM), initially derived from the WEPS plant growth model, to be used for merging enhancements from other EPIC-based plant growth models; and (2) describe and evaluate new phenology, seedling emergence, and canopy height sub-models derived from the Phenology Modular Modeling System (PhenologyMMS V1.2) and incorporated into UPGM. A 6-year (2005–2010) irrigated maize (Zea mays L.) study from northeast Colorado was used to calibrate and evaluate UPGM running both the original (i.e., based on WEPS) and new phenology, seedling emergence, and canopy height sub-models. Model statistics indicated the new sub-models usually resulted in better simulation results than the original sub-models. For example when comparing original and new sub-models, respectively, for predicting canopy height, the root mean square error (RMSE) was 53.7 and 40.7 cm, index of agreement (d) was 0.84 and 0.92, relative error (RE) was 26.0 and ?1.26 %, and normalized objective function (NOF) was 0.47 and 0.33. The new sub-models predict leaf number (old sub-models do not), with mean values for 4 years of 2.43 leaves (RMSE), 0.78 (d), 18.38 % (RE), and 0.27 (NOF). Simulating grain yield, final above ground biomass, and harvest index showed little difference when running the original or new sub-models. Both the new phenology and seedling emergence sub-models respond to varying water deficits, increasing the robustness of UPGM for more diverse environmental conditions. Future research will continue working to incorporate existing enhancements from other EPIC-based plant growth models to unify them into one model such as multispecies competition and N cycling.     

Polycyclic aromatic hydrocarbon concentrations,mutagenicity, and Microtox® acute toxicity testing of Peruvian crude oil and oil-contaminated water and sediment

The oil industry is a major source of contamination in Peru, and wastewater and sediments containing oil include harmful substances that may have acute and chronic effects. This study determined polycyclic aromatic hydrocarbon (PAH) concentrations by GC/MS, mutagenicity using TA98 and TA100 bacterial strains with and without metabolic activation in the Muta-ChromoPlate? test, and Microtox® 5-min EC₅₀ values of Peruvian crude oil, and water and sediment pore water from the vicinity of San José de Saramuro on the Marañón River and Villa Trompeteros on the Corrientes River in Loreto, Peru. The highest total PAH concentration in both areas was found in water (Saramuro?=?210.15 μg/ml, Trompeteros?=?204.66 μg/ml). Total PAH concentrations in water from San José de Saramuro ranged from 9.90 to 210.15 μg/ml (mean?=?66.48 μg/ml), while sediment pore water concentrations ranged from 2.19 to 70.41 μg/ml (mean?=?24.33 μg/ml). All water samples tested from Saramuro and Trompeteros sites, and one out of four sediment pore water samples from Trompeteros, were found to be mutagenic (P?<?0.001). One sediment pore water sample in Saramuro was determined to have a measurable toxicity (Microtox EC₅₀?=?335.1 mg/l), and in Trompeteros, the EC₅₀ in water and sediment pore water ranged from 25.67 to 133.86 mg/l. Peruvian crude oil was mutagenic using the TA98 strain with metabolic activation, and the EC₅₀ was 17.18 mg/l. The two areas sampled had very high PAH concentrations that were most likely associated with oil activities, but did not lead to acute toxic effects. However, since most of the samples were mutagenic, it is thought that there is a greater potential for chronic effects.     

"泉城"地下水补给区脆弱性评价研究

享有"泉城"美誉的济南市以丰沛优质的地下水闻名于世,构成了以"泉"为中心的城市风貌,旧城区2.6 km2范围内分布着136处名泉.     

Sediment budgets and source determinations using fallout Cesium-137 in a semiarid rangeland watershed,Arizona, USA

Analysis of soil redistribution and sediment sources in semiarid and arid watersheds provides information for implementing management practices to improve rangeland conditions and reduce sediment loads to streams. The purpose of this research was to develop sediment budgets and identify potential sediment sources using ¹³⁷Cs and other soil properties in a series of small semiarid subwatersheds on the USDA ARS Walnut Gulch Experimental Watershed near Tombstone, Arizona, USA. Soils were sampled in a grid pattern on two small subwatersheds and along transects associated with soils and geomorphology on six larger subwatersheds. Soil samples were analyzed for ¹³⁷Cs and selected physical and chemical properties (i.e., bulk density, rocks, particle size, soil organic carbon). Suspended sediment samples collected at measuring flume sites on the Walnut Gulch Experimental Watershed were also analyzed for these properties. Soil redistribution measured using ¹³⁷Cs inventories for a small shrub-dominated subwatershed and a small grass-dominated subwatershed found eroding areas in these subwatersheds were losing −5.6 and −3.2 t ha⁻¹ yr⁻¹, respectively; however, a sediment budget for each of these subwatersheds, including depositional areas, found net soil loss to be −4.3 t ha⁻¹ yr⁻¹ from the shrub-dominated subwatershed and −0.1 t ha⁻¹ yr⁻¹ from the grass-dominated subwatershed. Generally, the suspended sediment collected at the flumes of the six other subwatersheds was enriched in silt and clay. Using a mixing model to determine sediment source indicated that shrub-dominated subwatersheds were contributing most of the suspended sediment that was measured at the outlet flume of the Walnut Gulch Experimental Watershed. The two methodologies (sediment budgets and sediment source analyses) indicate that shrub-dominated systems provide more suspended sediment to the stream systems. The sediment budget studies also suggest that sediment yields measured at the outlet of a watershed may be a poor indicator of actual soil redistribution rates within these semiarid watersheds. Management of these semiarid rangelands must consider techniques that will protect grass-dominated areas from shrub invasion to improve rangeland conditions.     

Effects of a herbicide-insecticide mixture in freshwater microcosms: risk assessment and ecological effect chain

Effects of chronic application of a mixture of the herbicide atrazine and the insecticide lindane were studied in indoor freshwater plankton-dominated microcosms. The macroinvertebrate community was seriously affected at all but the lowest treatment levels, the zooplankton community at the three highest treatment levels, with crustaceans, caddisflies and dipterans being the most sensitive groups. Increased abundance of the phytoplankton taxa Cyclotella sp. was found at the highest treatment level. Threshold levels for lindane, both at population and community level, corresponded well with those reported in the literature. Atrazine produced fewer effects than expected, probably due to decreased grazer stress on the algae as a result of the lindane application. The safety factors set by the Uniform Principles for individual compounds were also found to ensure protection against chronic exposure to a mixture of a herbicide and insecticide at community level, though not always at the population level.