活性炭纤维载体生物膜法处理洗车废水研究

为了实现洗车废水的循环使用,进行了以聚丙烯腈基活性炭纤维(PAN-ACF)为生物膜载体处理洗车废水的实验研究。以LAS、COD和NH3-N等指标考察了活性炭纤维生物膜反应器对洗车废水的处理效果。结果表明:在常温下、pH=6.5~7,当进水流量在30 mL/min时,反应器达到最佳运行参数,活性炭纤维载体生物膜法对LAS、COD和NH3-N等的去除率分别达到了97%、80%和60%。出水水质完全达到《生活杂用水水质标准》(CJ/T48-99)中洗车用水主要水质指标的规定。此外,实验表明PAN-ACF作为生物膜载体具有很好的生物亲和性和再生性。     

旋风除尘器流场及浓度场实验与模拟

在研究旋风除尘器内气固两相的运动状况及分离机理方面,计算机模拟替代部分实验的方法能够优化设计旋风除尘器结构参数,提高其对微细颗粒的捕集效率,减少运行压力损失。本研究采用RSM模型和随机轨道模型对旋风除尘器内流场及浓度场进行模拟及实验。研究表明,旋风除尘器压力损失模拟结果与实验结果吻合较好,对于大于5μm的颗粒其捕集效率模拟结果与实验结果基本吻合;旋风除尘器外壁的颗粒浓度呈螺旋带状分布;如将排气管管径减少至原直径0.8倍,可使其对2μm颗粒捕集效率提高6.6%,但压力损失提高36.5%;颗粒的凝并作用有利于提高旋风除尘器微细颗粒的捕集效率。     

长沙市夏季大气颗粒物中重金属的形态及其源解析

对长沙市高开区、经开区、开福区以及马坡岭4个采样点夏季的大气颗粒物(TSP)浓度以及颗粒物中的重金属元素Cu、Zn、Mn、Pb和Cd的浓度和形态分布进行了研究分析,利用污染因子(Cf)对重金属元素的可保持能力进行了评价,并利用因子分析方法(PCA)分析TSP中重金属元素的主要来源。结果显示长沙市夏季TSP平均浓度为220.7μg/m3,表明长沙市颗粒物污染较严重。TSP中重金属元素浓度大小顺序为:ZnPbCuMnCd。从形态分布来看,大约63.3%~89.0%的Cu主要存在于可氧化态(F3),而Mn在这一态中分布最少。元素Zn、Cd则主要分布在弱酸提取态,分别占了70%和35%。Pb主要分布在残渣态,大约为24%~43%。由污染因子计算可知Cu、Cd和Zn比Mn、Pb有更高的迁移性。     

单纤维过滤介质表面尘粒捕集的随机模拟

基于控制面概念和粒子运动轨迹计算,建立单纤维过滤介质表面尘粒捕集的三维随机计算模型,采用Ku-wabara流场表征单纤维表面的气流绕流特征。计算分析了St数、无量纲粒径及单纤维过滤模型填充密度对沉积物形态结构和积尘状态下单纤维捕集效率的影响。结果指出,St数对沉积物形态结构具有显著作用,随St数减小,沉积物由紧密的堆积结构演变为分叉显著的树枝状结构。模拟结果还发现,无论过滤条件如何变化,无量纲单纤维捕集效率随捕集粒子数呈近似线性增加关系。     

印染废水处理工艺改造及其效益分析

通过实验数据分析,对本源微生物菌剂处理印染废水的有效性进行了检验。在此基础上,确定了先生物处理后絮凝的处理方式。进而分析了印染废水原处理工艺中存在的问题,并对其进行了改造,即:以本源微生物菌剂为母菌接种于印染废水中,并结合生物铁填料对其进行处理。工艺改造成功启动后,稳定运行结果显示:复合生化池和接触氧化池的处理工艺对色度和COD的平均去除率分别为:55.69%、55.63%和78.53%、78.21%;出水pH、色度和COD的平均值分别为6.6、13倍和93 mg/L,全部满足标准要求。该工艺大大减少了污泥量,且降低了处理费用。     

Sustainable management measures for healthcare waste in China

This paper discusses actions aimed at sustainable management of healthcare wastes (HCW) in China, taking into account the current national situation in this field, as well as the requirements deriving from the Stockholm Convention on Persistent Organic Pollutants and the WHO recommendations. By the end of 2005, there were 149 low-standard HCW disposal facilities in operation in China, distributed throughout different areas. According to the National Hazardous Waste and Healthcare Waste Disposal Facility Construction Plan, 331 modern, high-standard, centralized facilities will be built up in China in municipal level cities. Although incineration is still the main technical option for HCW disposal in China, it is expected that, especially for medium and small size facilities, non-incineration technologies will develop quickly and will soon become the main technical option. The basic management needs – both from the point of view of pollution control and final disposal – have been defined, and a system of technical and environmental standards has been formulated and implemented; however, there are still some shortages. This is particularly true when considering the best available techniques and best environmental practices developed under the Stockholm Convention, with which the present technological and managing situations are not completely compliant. In this framework, the lifecycle (from generation to final disposal of wastes) of HCW and holistic approaches (technology verification, facilities operation, environmental supervision, environmental monitoring, training system, financial mechanism, etc.) towards HCW management are the most important criteria for the sustainable and reliable management of HCW in China.     

NaOH改性活性炭的表面特征及吸附甲醛的性能

研究了NaOH改性活性炭(AC)的表面官能团变化特征及其吸附甲醛的性能.实验结果表明:改性AC表面的羧基、酚羟基、内酯基等官能团均与NaOH发生化学反应;质量分数为30%的NaOH溶液对AC表面的清洗作用最大,能将AC表面的杂质基本清除,此时AC表面羧基、酚羟基、内酯基和羰基浓度均达到最大;NaOH溶液质量分数为30%时,改性AC吸附甲醛的效果最好;改性AC表面酚羟基浓度的大小与改性AC吸附甲醛气体穿透时间的长短呈正比.     

十三烷基苯磺酸钠和辛基酚聚氧乙烯醚二元复配溶液的定量分析

采用向十三烷基苯磺酸钠（STBS）和非离子表面活性剂辛基酚聚氧乙烯醚（OP-10）二元复配溶液中添加β-环糊精（β-CD）的方法,降低STBS和OP-10之间定量检测时的相互干扰。实验结果表明：添加β-CD时,可提高STBS的检测准确性,降低STBS对OP-10的检测干扰;在二元复配溶液中,STBS和OP-10的方法回收率分别在100.8%~102.0%,97.4%~102.2%之间,检测误差分别在2.0%和2.6%以内;Cl^-,SO₄^2-,Na⁺,Ca²⁺的存在对二元复配溶液中STBS和OP-10的检测干扰可忽略;将该方法应用于地层水水样中,仍可准确定量分析STBS和OP-10的含量。     

流化床中污泥干燥特性

以湿污泥为原料在气固流动流化床干燥器内进行了污泥干燥特性的实验研究,考察流化风速、送风温度、联合干燥热量配比的变化对干燥强度、干燥热效率及平均传热系数的影响。实验结果表明,流化床污泥干燥最佳流化风速为1.48 m/s左右;随着流化风温的升高,干燥强度和干燥热效率逐渐增大,但增幅减小;单独的加热管干燥和流化风干燥的干燥热效率均较低,分别为33%和45%左右。在相同总输入热量下,随着内置加热管输入热量的比重越来越大,干燥热效率、干燥强度和平均传热系数均先增大后减小。     

Response of photosynthetic and growth characteristic of Mosla chinensis and congenerous weed M. scabra to soil water content

Heterogeneity of precipitation could influence various physiological and ecological processes of plants. We present a comparative study on the ecophysiological responses of two congenerous species, Mosla chinensis (an endemic species) and M. scabra (a weedy species), to four soil water content (20%, 40%, 60% and 90% of water holding capacity (WHC), referred to as W20, W40, W60 and W90, respectively) to understand their ecophysiological responses and ecological differentiation. Results showed that both species grew well from W40 to W90, as they showed higher photosynthetic rate and biomass and bigger plants under these soil water content. However, biomass, chlorophyll a to b ratio (Chl _a/b) and root to shoot ratio (R/S) of M. scabra but not M. chinensis were significantly reduced under W20, indicating M. chinensis showed stronger capacity of sun-acclimation under severe drought than M. scabra. M. chinensis showed priority in adapting severe drought in comparison with M. scabra. We hypothesize that the different adaptive abilities to soil water content are partly responsible for their ecological differentiation observed in the field and may affect their fate in their native habitat.