Redundancy analysis for characterizing the groundwater quality in coastal industrial areas

Groundwater quality in coastal area has been an issue of interest because of excessive groundwater extraction for human use, for example, industrialization, irrigation, which can lead to saltwater intrusion. The study develops an integrated data analysis procedure based on multivariate statistics principal component analysis (PCA), hierarchical cluster analysis (HCA) and redundancy analysis (RDA), to determine the effects of key environmental conditions on the formulation of groundwater pollutants. This proposed method was demonstrated by analyzing groundwater quality monitoring data collected between 2011 and 2014 from four coastal industrial areas in Changhua county of Taiwan, namely Chuansing, Xianxi, Lukang and Fangyuan industrial parks. First, different environmental conditions in each industrial region were explored by PCA. The spatial hierarchy and spatial distribution of pollutant categories were then identified using HCA with the kriging method. Finally, the effect of environmental conditions on constitutive pollutants were identified with RDA. The three environmental patterns identified from the analytical results in Chuansing, Lukang and Xianxi were the salination factor (including conductivity and general hardness (GH)), water level and redox condition (including dissolved oxygen and oxidation–reduction potential). Fangyuan industrial park had only two patterns, namely salination (including conductivity and GH) and oxygen content (including DO and depth). The pollutant category indicated high concentrations of all pollutants in Chuansing and Fangyuan, and higher concentration of SO₄^2?, TDS, Cl^? in Xianxi, and of NH₃-N, Mn, Fe and TOC in Lukang. According to RDA results, salination caused the high concentrations of NH₃N, Cl^?, TDS in Chuansing, and of Cl^?, TDS and SO₄^2? in Xianxi and Lukang. Additionally, salination caused high concentrations of Fe in both Lukang and Fangyuan industrial parks in combination with those three pollutants. The redox condition was linked to high content of NO₃^? in Chuansing and Lukang, and of TOC in Xianxi. In Fangyuan industrial park, NO₃^? was also linked to high oxygen concentration. In summary, the combination of PCA, HCA and RDA enables the analysis of monitoring data to support policy decision-making.     

The effects assessment of firm environmental strategy and customer environmental conscious on green product development

The purpose of this study is to examine why both parties (industry and consumer market) have mutual interests in protecting the environment but they still are hesitant to act green. The study used two-stage sampling from consumer market to depict ideal green product characteristics and reliable toy companies, and visit these companies for the second sample collection to examine whether the organizational eco-innovation strategy with customer value has a positive effect on green product development. In other words, the customer's benefit is an important factor for new product development strategy for green toys. This research shows that the willingness to buy green toys increases if most people in society buy green toys. This represents that customers are environmentally conscious and care about protecting the environment, or buying green toys is the result of a new economic trend and childhood education. The willingness to buy green toys increases if customers think that green products implies an enhancement on new product development to toy manufacturers. Further, if manufacturers are able to manage the difficulty of cooperation with all parties in the supply chain and difficulties related to production, they are willing to adopt customers' perceived value on green toys for their new product development strategy. It is rare to find academic research discussing the perspectives of both consumers and manufacturers in the same study because the research topic is very broad and many conditions must be considered. This research aims to find the effect of consumer-perceived value and company eco-innovation on green product development.     

Chlorine residuals and haloacetic acid reduction in rapid sand filtration

It is quite rare to find biodegradation in rapid sand filtration for drinking water treatment. This might be due to frequent backwashes and low substrate levels. High chlorine concentrations may inhibit biofilm development, especially for plants with pre-chlorination. However, in tropical or subtropical regions, bioactivity on the sand surface may be quite significant due to high biofilm development—a result of year-round high temperature. The objective of this study is to explore the correlation between biodegradation and chlorine concentration in rapid sand filters, especially for the water treatment plants that practise pre-chlorination. In this study, haloacetic acid (HAA) biodegradation was found in conventional rapid sand filters practising pre-chlorination. Laboratory column studies and field investigations were conducted to explore the association between the biodegradation of HAAs and chlorine concentrations. The results showed that chlorine residual was an important factor that alters bioactivity development. A model based on filter influent and effluent chlorine was developed for determining threshold chlorine for biodegradation. From the model, a temperature independent chlorine concentration threshold (Cl_threshold) for biodegradation was estimated at 0.46-0.5 mg L⁻¹. The results imply that conventional filters with adequate control could be conducive to bioactivity, resulting in lower HAA concentrations. Optimizing biodegradable disinfection by-product removal in conventional rapid sand filter could be achieved with minor variation and a lower-than-Cl_threshold influent chlorine concentration. Bacteria isolation was also carried out, successfully identifying several HAA degraders. These degraders are very commonly seen in drinking water systems and can be speculated as the main contributor of HAA loss.     

High-throughput screening of dioxins in sediment and soil using selective pressurized liquid extraction with immunochemical detection

A high-throughput screening method using selective pressurized liquid extraction (SPLE) and enzyme-linked immunosorbent assay (ELISA) for monitoring dioxins in sediment and soil is described. SPLE conditions were developed by extracting sediment or soil together with alumina, 10% AgNO₃ in silica, and sulfuric acid impregnated silica (acid silica) using dichloromethane (DCM) as the solvent at 100 °C and 2000 psi. Post-extraction cleanups were not required for ELISA. Two reference sediments (National Institute of Standards and Technology SRM 1944 and Wellington Laboratories WMS01) were analyzed by the SPLE–ELISA method. The ELISA utilized a polyclonal antibody and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) as the calibrant. Recoveries of ELISA-derived TCDD equivalents (EQ) relative to the expected gas chromatography/high resolution mass spectrometry (GC/HRMS) derived dioxin toxic equivalent (TEQ) values were 116 ± 11% for SRM 1944 and 102 ± 13% for WMS01. ELISA TCDD EQs were consistent with the dioxin TEQs as measured by GC/HRMS for 25 soil/sediment samples from seven different contaminated sites. The ELISA had an approximate method detection limit of 10 pg g⁻¹ with a precision of 2.6–29% based on the relative percentage difference (%RPD) for duplicate samples. Estimated sample throughput for the SPLE–ELISA was three times or more than that of the GC/HRMS method employing PLE with a multi-column cleanup.     

生物刺激与生物强化联合修复柴油污染土壤

从柴油污染土壤中筛选分离出一株高效降解柴油的菌株CY-1,考察了自然衰减修复、生物刺激修复、生物强化修复以及生物刺激-生物强化联合修复等4种修复方法对土壤中柴油的降解能力及降解过程中几种土壤微生物酶活性的变化。实验结果表明:该菌为假单胞菌属;采用生物刺激-生物强化联合修复初始柴油质量分数为2.70%的柴油污染土壤,经过31 d的降解,柴油质量分数降至1.09%,柴油去除率达59.6%;经生物刺激-生物强化联合修复,土壤脱氢酶活性和荧光素二乙酸酯水解酶活性最高;通过生物刺激处理可使土壤脲酶活性和磷酸酶活性达到最高。     

河南省环境管制与工业污染物排放量的灰色关联度研究

选取万元GDP能耗作为参考序列,将工业发展过程中的5种主要污染物作为比较序列,运用灰色关联分析方法定量研究了河南省18个城市的环境管制和不同污染物之间的灰色关联程度,并提出了一些富有针对性的政策建议：加强监管,切实查找固体废弃物的产生来源,努力提高废弃物综合利用水平。     

A sulfur removal and disposal process through H2S adsorption and regeneration: Ammonia leaching regeneration

An iron oxide solid sponge H₂S adsorbent works by reacting H₂S and turning ferric oxide into ferric sulfide. The ferric sulfide will be converted back into ferric oxide and elemental sulfur when contacting oxygen or air. This study investigates the leaching of elemental sulfur from the solid sponge using anhydrous liquid ammonia as solvent. The leaching treatment expectedly results in effective regeneration of the adsorbent, which is able to lead to a sulfur removal and recovery process suitable for handling the small and mid-sized sulfur production cases, i.e., those less than 10 ton/day sulfur. The leaching does not significantly impair the physical properties, including the adsorbent pellet strength. The adsorption–regeneration (or leaching) cycle could be repeated at least three times. The cumulative sulfur loading can achieve as high as 50% (w/w), three times greater than that in the one-time use. The wash-off in leaching and the spent adsorbent can be made into slurry that is to be injected into underground formations such as depleted oil wells. It is anticipated that this underground injection is safer and more efficient than acid gas injection.     

Effects of high ammonium level on biomass accumulation of common duckweed Lemna minor L.

Growing common duckweed Lemna minor L. in diluted livestock wastewater is an alternative option for pollutants removal and consequently the accumulated duckweed biomass can be used for bioenergy production. However, the biomass accumulation can be inhibited by high level of ammonium (NH₄ ⁺) in non-diluted livestock wastewater and the mechanism of ammonium inhibition is not fully understood. In this study, the effect of high concentration of NH₄ ⁺ on L. minor biomass accumulation was investigated using NH₄ ⁺ as sole source of nitrogen (N). NH₄ ⁺-induced toxicity symptoms were observed when L. minor was exposed to high concentrations of ammonium nitrogen (NH₄ ⁺-N) after a 7-day cultivation. L. minor exposed to the NH₄ ⁺-N concentration of 840 mg l^?1 exhibited reduced relative growth rate, contents of carbon (C) and photosynthetic pigments, and C/N ratio. Ammonium irons were inhibitory to the synthesis of photosynthetic pigments and caused C/N imbalance in L. minor. These symptoms could further cause premature senescence of the fronds, and restrain their reproduction, growth and biomass accumulation. L. minor could grow at NH₄ ⁺-N concentrations of 7–84 mg l^?1 and the optimal NH₄ ⁺-N concentration was 28 mg l^?1.     

Study on particulates and volatile organic compounds removal with TiO2 nonwoven filter prepared by electrospinning

In this study, polyvinyl alcohol (PVA) and titania (TiO₂) Degussa P-25 were mixed to generate TiO₂ nonwoven filters using electrospinning. The wires of titanium dioxide and the nonwoven binding titania nanofibers were formed using 14 kV voltage and a distance of 15 cm. A single-factor experimental method was used to investigate the effects of parameters such as initial concentration, retention time, and light source on acetone removal by nonwoven binding titania nanofibers. Furthermore, the effects of parameters such as gas pressure, particle size, initial concentration, and retention time on the removal of particulates were also assessed. The results showed that the degradation efficiency increased with decreasing initial concentrations and increasing retention time. The best operational conditions during this study for the removal of acetone using the TiO₂ nonwoven filters were a retention time of 100 sec, initial acetone concentration of 250 ppm, and ultraviolet (UV) light source of 254 nm. Under those conditions, 99% acetone removal efficiency was obtained. In addition, 90% particulate matter removal efficiency was reached when the particulate size was greater than 200 nm and the reaction time was longer than 5 minutes. The prepared TiO₂/nanofiber has good performance for volatile organic compounds (VOCs) and particulate removal at the same time.

Implications: In this study, polyvinyl alcohol (PVA) and titania (TiO₂) Degussa P-25 were mixed to generate TiO₂ nonwoven filters using electrospinning. The results showed that the optimum operating conditions for the removal of acetone using the TiO₂ nonwoven filters were a retention time of 100 sec, initial acetone concentration of 250 ppm, and UV light source of 254 nm. Under those conditions, 99% acetone removal efficiency was obtained.