The use of sediment analogues to study the uptake of pollutants by chironomid larvae

A technique is described that uses artificial resin beads with known surface properties to investigate the factors influencing the bioaccumulation of pollutants from sediments. One advantage of this technique is that it provides a standard procedure against which it is possible to calibrate natural sediments with their diverse properties. The method has been used on third instar larvae of the midge Chironomus riparius and the results are compared with previous studies on the worm Lumbriculus variegatus. The use of a standard test using resin beads as a substitute for natural sediment allows comparisons to be made between species and substrates. Thus, the bioaccumulation factors for the midge larvae are much smaller than those of the worm and this correlates with the ability of the insect larva to detoxify many pollutants. It is also possible to use the test to identify if ingestion of the sediment increases the bioaccumulation of contaminants and whether this involves the release of pollutants by digestive processes or not.     

Heavy metal extractable forms in sludge from wastewater treatment plants

The analysis of heavy metals is a very important task to assess the potential environmental and health risk associated with the sludge coming from wastewater treatment plants (WWTPs). However, it is widely accepted that the determination of total elements does not give an accurate estimation of the potential environmental impact. So, it is necessary to apply sequential extraction techniques to obtain a suitable information about their bioavailability or toxicity. In this paper, a sequential extraction scheme according to the BCR's guidelines was applied to sludge samples collected from each sludge treatment step of five municipal activated sludge plants. Al. Cd, Co, Cu, Cr, Fe, Mn, Hg, Mo, Ni, Pb, Ti and Zn were determined in the sludge extracts by inductively coupled plasma atomic emission spectrometry. In relation to current international legislation for the use of sludge for agricultural purposes none of metal concentrations exceeded maximum permitted levels. In most of the metal elements under considerations, results showed a clear rise along the sludge treatment in the proportion of two less-available fractions (oxidizable metal and residual metal).     

Time-series analysis of above-road particulate matter at the Caldecott Tunnel exit

On November 18, 1997, above-road particulate matter (PM) lidar (light detection and ranging) signals and heavy-duty (HD) and light-duty (LD) vehicle counts were simultaneously collected for 894 10-sec sampling periods at the Caldecott Tunnel in Orinda, CA, for the purpose of measuring the relative contributions of LD and HD vehicles to the PM lidar signal under real-world driving conditions. The relationship between the PM lidar signal and traffic activity (i.e., LD and HD traffic volumes) was examined using a time-series analysis technique, multilagged regression. The time-series model results indicate that the PM lidar signal in the current sampling period (PMt) depended on the level recorded in the previous three sampling periods (i.e., PMt-1, PMt-2, and PMt-3), the number of LD vehicles in the seventh past sampling period (LDt-7), and the number of HD vehicles measured 80 sec previous to the current sampling period (HDt-8). On a 10-sec period basis, the model results indicate that HD vehicles contributed, on average, 3 times more to above-road PM lidar signals than did LD vehicles. The observed lag in the relationship between vehicle types and the lidar signal 20 m above the road suggests that resuspended road dust, rather than tailpipe exhaust emissions, was the main source of the detected PM. Detection of road dust at such heights above the road suggests the need for investigating the processes governing the vertical transport and recycling of PM over the road as a function of vehicle dynamics under a range of meteorological conditions.     

The behaviour of N-(phenylsulfonyl)-glycine and phenacetin in a municipal sewage treatment plant--a case study

The behaviour of N-(phenylsulfonyl)-glycine (PSG) and phenacetin (PHE) in a municipal sewage treatment plant near Heidelberg, Germany, was investigated in the summer of 1997. For that purpose, 10 g of each substance was dissolved and poured simultaneously into the influent. In addition to the spiked compounds, the samples of the influent, the biological stage and the effluent were analyzed for N-(phenylsulfonyl)-sarcosine (PSS), N-methyl-N-(phenylsulfonyl)-amide (MPS), N-methyl-phenacetin, N-methyl-N-(phenylsulfonyl)-epsilon-aminocaproic (PSC) acid and its degradation product N-methyl-N-(phenylsulfonyl)-gamma-aminobutyric (PSB) acid. Within 24 h PHE could be detected almost quantitatively in the effluent. Since N-methyl-phenacetin could not be found in any of the samples, apparently no methylation of the amino-group of PHE took place. The amount of PSG in the effluent was within 24 h 26.0 g, which is more than two fold higher than added. The decrease of PSG between biological stage and effluent and the increase of PSS within the same time correlate well. Therefore, the formation of PSS by microbial methylation of PSG in the sewage treatment plant must be assumed.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in sediment, soil, fish, shellfish and crab samples from Tokyo Bay area, Japan

Concentrations of tetra- to octa-chlorinated dibenzo-p-dioxins and dibenzofurans in samples collected in or near Tokyo Bay, Japan, with a densely inhabited catchment area, were congener-specifically determined and discussed. Analyzed in this study were samples of surface sediment covering the whole bay area, reference soil representing atmospheric impact, and fish, shellfish and crab commonly consumed as food. The range of concentrations were comparable to or higher than those in other parts of Japan. The origins of these compounds in the catchment area of the bay were investigated in terms of homolog and isomeric compositions in the sediment samples. Biota-sediment accumulation factors for benthic species declined as the degree of chlorination increased.     

Effects of five insecticides used in apple orchards on Hyaliodes vitripennis (Say) (Hemiptera: Miridae)

Azinphos-methyl, carbaryl, dimethoate, phosmet and phosalone were used in apple orchards to manage apple aphid, apple maggot, woolly apple aphid and leaf eating caterpillars. Among the five insecticides evaluated, dimethoate, carbaryl and azinphosmethyl were the most toxic to the nymphs and adults of Hyaliodes vitripennis (Say) from two regions. Phosalone was the least toxic. Nymphs were more resistant than the adults. While the LC50 for dimethoate was 130 ppm for nymphs, it was 3 ppm for adults from St. Jean-Baptiste-de-Rouville. There were also significant differences in the level of resistance between the two regions where the H. vitripennis were collected. At St. Alexandre the LC50 for phosalone on nymphs was 19,250 ppm whereas, at St. Jean-Baptiste-de-Rouville it was 160,000 ppm.     

Daily mortality and air pollution in The Netherlands

We studied the association of daily mortality with short-term variations in the ambient concentrations of major gaseous pollutants and PM in the Netherlands. The magnitude of the association in the four major urban areas was compared with that in the remainder of the country. Daily cause-specific mortality counts, air quality, temperature, relative humidity, and influenza data were obtained from 1986 to 1994. The relationship between daily mortality and air pollution was modeled using Poisson regression analysis. We adjusted for potential confounding due to long-term and seasonal trends, influenza epidemics, ambient temperature and relative humidity, day of the week, and holidays, using generalized additive models. Influenza episodes were associated with increased mortality up to 3 weeks later. Daily mortality was significantly associated with the concentration of all air pollutants. An increase in the PM10 concentration by 100 micrograms/m3 was associated with a relative risk (RR) of 1.02 for total mortality. The largest RRs were found for pneumonia deaths. Ozone had the most consistent, independent association with mortality. Particulate air pollution (e.g., PM10, black smoke [BS]) was not more consistently associated with mortality than were the gaseous pollutants SO2 and NO2. Aerosol SO4(-2), NO3-, and BS were more consistently associated with total mortality than was PM10. The RRs for all pollutants were substantially larger in the summer months than in the winter months. The RR of total mortality for PM10 was 1.10 for the summer and 1.03 for the winter. There was no consistent difference between RRs in the four major urban areas and the more rural areas.     

Assessment of the effects of sugar cane plantation burning on daily counts of inhalation therapy

This study was designed to evaluate the association between sugar cane plantation burning and hospital visits in Araraquara in the state of S?o Paulo, Brazil. From June 1 to August 31, 1995, the daily number of visits of patients who needed inhalation therapy in one of the main hospitals of the city was recorded and used as health impairment estimation. Sedimentation of particle mass (the amount of particles deposited on four containers filled with water) was measured daily. The association between the weight of the sediment and the number of visits was evaluated by means of Poisson regression models controlled for seasonality, temperature, day of the week, and rain. We found a significant and dose-dependent relationship between the number of visits and the amount of sediment. The relative risk of visit associated with an increase of 10 mg in the sediment weight was 1.09 (1-1.19), and the relative risk of an inhalation therapy was 1.20 (1.03-1.39) on the most polluted days (fourth quartile of sediment mass). These results indicate that sugar cane burning may cause deleterious health effects in the exposed population.