A biomarker model of sublethal genotoxicity (DNA single-strand breaks and adducts) using the sentinel organism Aporrectodea longa in spiked soil

There is a need to develop risk biomarkers during the remediation of contaminated land. We employed the earthworm, Aporrectodea longa (Ude), to determine whether genotoxicity measures could be applied to this organism's intestinal tissues. Earthworms were added, for 24h or 7 days, to soil samples spiked with benzo[a]pyrene (B[a]P) and/or lindane. After exposure, intestinal tissues (crop/gizzard or intestine) were removed prior to the measurement in disaggregated cells of DNA single-strand breaks (SSBs) by the alkaline comet assay. Damage was quantified by comet tail length (CTL, microm). B[a]P 24-h exposure induced dose-related increases (P<0.0001) in SSBs. Earthworm intestine was significantly (P<0.0001) more susceptible than crop/gizzard to B[a]P and/or lindane. However, both tissues appeared to acquire resistance following 7-day exposure. B[a]P-DNA adducts, measured by (32)P-postlabelling, showed a two-adduct-spot pattern. This preliminary investigation suggests that earthworm tissues may be incorporated into genotoxicity assays to facilitate hazard identification within terrestrial ecosystems.     

Artificial sweat enhances dermal transfer of chlorpyrifos from treated nylon carpet fibers

The dermal transfer and absorption of 14C-ring-chlorpyrifos from nylon carpet fibers was measured in skin penetration-evaporation cells with excised pig skin. Prior to application, synthetic sweat was applied to skin in half of the cells. Radioactivity was measured in receptor fluid, dermis, epidermis, tape stripping samples, and vapor trap samples during a 24-h period. The sum of radiolabel recovered from the dermis and receptor fluid represented the absorbed dose. There was no significant difference (p > 0.05) in percutaneous absorption between cells that received the synthetic sweat application and "dry" cells (1.3 +/- 0.3% of applied dose). There was significantly more (p < 0.05) radiolabel recovered from tape stripping (5.4 +/- 2.1 vs. 2.8 +/- 0.6%) and in the epidermis (4.5 +/- 0.8 vs. 3.1 +/- 0.3%) from cells that received the synthetic sweat application, which indicated synthetic sweat facilitated transfer of chlorpyrifos from a treated substrate to the skin surface. The measured value for percutaneous absorption of chlorpyrifos agreed with the value predicted from an empirical model previously developed for nitro compound-containing soil.     

Measurements in the raw gas of a full scale municipal waste incinerator using a wavelength resolved REMPI mass spectrometer

A resonance enhanced multiphoton ionization (REMPI) mass spectrometer consisting of a tunable laser unit (Nd:YAG pump laser and OPO) and a reflectron mass spectrometer have been upgraded to cope with the difficult conditions such as vibrations, temperature fluctuations and dust, prevailing in an incinerator. On-line measurements of the raw gas have been carried out at the municipal waste incinerator in Stuttgart. Although this test series could not be completed the results are encouraging. They show that wavelength resolution can provide valuable information beyond the one obtainable by fixed frequency REMPI. Examples discussed include separation of interferants to the aniline signal and identification of phenantrene.     

Oxidation of triphenylarsine to triphenylarsineoxide by Trichoderma harzianum and other fungi

Arsenic resistant strains of bacteria and fungi were isolated from soil contaminated by chemical warfare agents. Until now, no metabolic products of microbial attack against the phenyl residues of the model substrate triphenylarsine (TP) were found if it was incubated together with these strains in liquid culture assays. However, one of the isolated fungi, Trichoderma harzianum As 11, was found to oxidize TP to triphenylarsineoxide (TPO). The yeast Trichosporon mucoides SBUG 801 and the white-rot fungus Phanerochaete chrysosporium were also able to oxidize the As(III) in TP. In addition, P. chrysosporium transformed phenylarsineoxide (PAO) to phenylarsonic acid (PAA) under O2-atmosphere. By means of a respirometer system, the oxidation of TP by T. harzianum As 11 was confirmed by a significantly higher consumption of oxygen in the presence of these compounds. HPLC analysis of the oxidation products TPO and PAA in the medium of the assays provided evidence for the transfer reaction of As(III) to As(V) in organic bonds. The oxidation products TPO and PAA are more hydrophilic than TP and PAO. Therefore, it was concluded that particular fungi contribute to the mobilization of arsenic in soil contaminated by chemical warfare agents.     

Carbon isotope fractionation during abiotic reductive dehalogenation of trichloroethene (TCE)

Dehalogenation of trichloroethene (TCE) in the aqueous phase, either on palladium catalysts with hydrogen as the reductant or on metallic iron, was associated with strong changes in delta13C. In general, the delta13C of product phases were more negative than those of the parent compound and were enriched with time and fraction of TCE remaining. For dehalogenation with iron, the delta13C of TCE and products varied from -42/1000 to +5/1000. For the palladium experiments, the final product, ethane, reached the initial delta13C of TCE at completion of the dehalogenation reaction. During dehalogenation, the carbon isotope fractionation between TCE and product phases was not constant. The variation in delta13C of TCE and products offers a new monitoring tool that operates independently of the initial concentration of pollutants for abiotic degradation processes of TCE in the subsurface, and may be useful for evaluation of remediation efficiency.     

Effect of surface coatings, grain size, and ionic strength on the maximum attainable coverage of bacteria on sand surfaces

The injection of bacteria in the subsurface has been identified as a potential method for in situ cleanup of contaminated aquifers. For high bacterial loadings, the presence of previously deposited bacteria can result in decreased deposition rates--a phenomenon known as blocking. Miscible displacement experiments were performed on short sand columns (approximately 5 cm) to determine how bacterial deposition on positively charged metal-oxyhydroxide-coated sands is affected by the presence of previously deposited bacteria. Approximately 8 pore volumes of a radiolabeled bacterial suspension at a concentration of approximately 1 x 10(9) cells ml-1 were introduced into the columns followed by a 2-pore-volume flush of cell-free buffer. It was found that the presence of Al- and Fe-coated sand increased both deposition rates and maximum fractional surface coverage of bacteria on the sediment surfaces. The effect of grain size on maximum bacterial retention capacity, however, was not significant. Decreasing ionic strength from 10(-1) to 10(-2) M KCl resulted in noticeable decreases in sticking efficiency (alpha) and maximum surface coverage (thetamax) for clean silica sand--results consistent with DLVO theory. In columns containing positively charged Al- and Fe-coated sands, however, changes in alpha and thetamax due to decreasing ionic strength were minimal. These findings demonstrate the importance of geochemical controls on the maximum bacterial retention capacity of sands.     

Laboratory and field evaluation of measurement methods for one-hour exposures to O3, PM2.5, and CO.

While researchers have linked acute (less than 12-hr) ambient O3, PM2.5, and CO concentrations to a variety of adverse health effects, few studies have characterized short-term exposures to these air pollutants, in part due to the lack of sensitive, accurate, and precise sampling technologies. In this paper, we present results from the laboratory and field evaluation of several new (or modified) samplers used in the "roll-around" system (RAS), which was developed to measure 1-hr O3, PM2.5, and CO exposures simultaneously. All the field evaluation data were collected during two sampling seasons: the summer of 1998 and the winter of 1999. To measure 1-hr O3 exposures, a new active O3 sampler was developed that uses two nitrite-coated filters to measure O3 concentrations. Laboratory chamber tests found that the active O3 sampler performed extremely well, with a collection efficiency of 0.96 that did not vary with temperature or relative humidity (RH). In field collocation comparisons with a reference UV photometric monitor, the active O3 sampler had an effective collection efficiency ranging between 0.92 and 0.96 and a precision for 1-hr measurements ranging between 4 and 6 parts per billion (ppb). The limits of detection (LOD) of this method were 9 ppb-hr for the chamber tests and approximtely 16 ppb-hr for the field comparison tests. PM2.5 and CO concentrations were measured using modified continuous monitors--the DustTrak and the Langan, respectively. A size-selective inlet and a Nafion dryer were placed upstream of the DustTrak inlet to remove particles with aerodynamic diameters greater than 2.5 microm and to dry particles prior to the measurements, respectively. During the field validation tests, the DustTrak consistently reported higher PM2.5 concentrations than those obtained by the collocated 12-hr PM2.5 PEM samples, by approximately a factor of 2. After the DustTrak response was corrected (correction factor of 2.07 in the summer and 2.02 in the winter), measurements obtained using these methods agreed well with R2 values of 0.87 in the summer and 0.81 in the winter. The results showed that the DustTrak can be used along with integrated measurements to measure the temporal and spatial variation in PM2.5 exposures. Finally, during the field validation tests, CO concentrations measured using the Langan were strongly correlated with those obtained using the reference method when the CO levels were above the LOD of the instrument [approximately 1 part per million (ppm)].     

Uptake rates of semipermeable membrane devices (SPMDs) for PCDDs, PCDFs and PCBs in water and sediment

Uptake rates of several PCDDs, PCDFs and PCBs were measured for semipermeable membrane devices (SPMDs) under controlled conditions in bulk water and sediment. The study was performed at 19 degrees C and 11 degrees C, and water and sediment concentrations were measured during the exposure. Linear uptake rates for specific PCDD/Fs and PCBs in 19 degrees C water varied from 34 to 111 l/m2 day and in 11 degrees C water from 8.8 to 96 l/m2 day for the whole SPMD. Uptake rates at 19 degrees C sediment ranged from 9.0 to 80 mgOC/m2 day and in 11 degrees C sediment, from 3.0 to 31, mgOC/m2 day. Partitioning of the compounds between membrane and lipid was also measured during the linear uptake phase. The membrane-lipid concentration ratios ranged from 0.02 to 1.11 depending on the compound, temperature, and bulk medium.     

Effects of metabolites of benzo(a)pyrene on unschedule DNA synthesis in BALB/3T3 cell line

In order to explore the damage from metabolites of benzo(a)pyrene on DNA of mammalian cells, the effects of four metabolites of benzo(a)pyrene (anti-BPDE, syn-BPDE, 3-OH-BP and 9-OH-BP) on synthesis of DNA and unschedule DNA synthesis (UDS) in BALB/3T3 cells were assayed, by methods of single-labeling and double-labeling. The results showed that all of the four agents were able to increase the synthesis of DNA, but only three of them (apart from syn-BPDE) induced UDS in BALB/3T3 cells. The above indicates that the metabolites of benzo(a)pyrene are able to damage DNA in BALB/3T3 cells, and that this effect may be relative to the sterical structure of metabolites of benzo(a)pyrene.