Integrated biomonitoring of air quality with plants and lichens: a case study on ambient ozone from central Italy

A biennial integrated survey, based on the use of vascular plants for the bioindication of the effects of tropospheric ozone together with the use of automatic analysers of ozone, as well as the mapping of lichen biodiversity was performed in the area of Castelfiorentino (Tuscany, central Italy). Photochemically produced ozone proved to be a fundamental presence during the warm season, with maximum hourly means reaching 114 ppb, exceeding the information threshold as fixed by EU: the use of supersensitive tobacco Bel-W3 confirmed the opportunity of carrying out detailed cost-effective monitoring surveys. The potential for didactical and educational implications of this methodology are appealing. Critical levels set up for the protection of vegetation have exceeded considerably. The comparison of biomass productivity in sensitive and resistant individuals (NC-S and NC-R white clover clones, in the framework of an European network) provided evidence that ambient ozone levels are associated with relevant reduction (up to 30%) in the performance of sensitive material; effects on flowering were also pronounced. The economic assessment of such an impact deserves attention. Mapping of epiphytic lichen biodiversity – which has been used to monitor air quality worldwide – was not related to ozone geographical distribution as depicted by tobacco response.     

Distribution and transport of coal tar-derived PAHs in fine-grained residuum

We investigated the distribution and transport of coal tar-derived polycyclic aromatic hydrocarbons (PAHs) in fine-grained residuum and alluvial floodplain deposits that underlie a former manufactured gas plant. All 16 USEPA priority pollutant PAHs are present at this site and have penetrated the entire 4-5m thickness of clayey sediments, which unconformably overly limestone bedrock. Concentrations of less hydrophobic PAHs (e.g., naphthalene, 0.011-384mg kg(-1)) were about 10 times higher than those of highly hydrophobic PAHs (e.g., benzo[g,h,i]perylene -0.002 to 56.03mgkg(-1)). Microscopic examination of thin-sections of the clay-rich sediments showed that fractures and rootholes, which can act as pathways for flow, occur throughout the profiles. Tarry residue was found coating some fractures and rootholes, indicating that coal tar was, in some cases, able to penetrate as an immiscible phase. However, in the vast majority of samples in which PAHs were detected, there was no detectable tar residue, suggesting that much of the transport occurred in the dissolved phase. Examination of thin-sections with an epifluorescent microscope indicated that PAHs, which fluoresce brightly when exposed to UV light, are distributed throughout the soil matrix, rather than being confined to fractures and rootholes. The widespread distribution of PAHs is most likely due to diffusion-controlled exchange between the fast-flow pathways in the fractures and rootholes and the relatively immobile water in the fine-grained matrix. This implies that fractures and rootholes can play a major role in controlling transport of highly hydrophobic compounds in fine-grained sediments, which would otherwise act as barriers to contaminant migration.     

Percentile estimation using variable censored data

Much progress has been made in recent years to address the estimation of summary statistics, using data that are subject to censoring of results that fall below the limit of detection (LOD) for the measuring instrument. Truncated data methods (e.g., Tobit regression) and multiple-imputation are two approaches for analyzing data results that are below the LOD. To apply these methods requires an assumption about the underlying distribution of the data. Because the log-normal distribution has been shown to fit many data sets obtained from environmental measurements, the common practice is to assume that measurements of environmental factors can be described by log-normal distributions. This article describes methods for obtaining estimates of percentiles and their associated confidence intervals when the results are log-normal and a fraction of the results are below the LOD. We present limited simulations to demonstrate the bias of the proposed estimates and the coverage probability of their associated confidence intervals. Estimation methods are used to generate summary statistics for 2,3,7,8-tetrachloro dibenzo-p-dioxin (2,3,7,8-TCDD) using data from a 2001 background exposure study in which PCDDs/PCDFs/cPCBs in human blood serum were measured in a Louisiana population. Because the congener measurements used in this study were subject to variable LODs, we also present simulation results to demonstrate the effect of variable LODs on the multiple-imputation process.     

Effect of pre-treatment and supporting media on Ni(II), Cu(II), Al(III) and Fe(III) sorption by plant root material

In this work Paspalum notatum root material was used to elucidate the influence of acid leaching pre-treatment and of sorption medium on metal adsorption. Ground P. notatum root was leached with 0.14M HNO(3). Leached root material (LRM) and non-leached root material (NLRM) were employed to flow sorption of Ni(II), Cu(II), Al(III) and Fe(III) in 0.5M CH(3)COONH(4) medium at pH 6.5. For LRM the sorption was also studied in 0.5M KNO(3) medium. The acid pre-treatment increased the sorption capacity (SC) for all ions studied. For the KNO(3) medium, Cu(II) and Fe(III) sorption was higher than in CH(3)COONH(4) and the type of the Ni(II) isotherm's model changed. The Freundlich model was the most representative isotherm model to describe metallic ions sorption. The (1)H NMR spectra showed differences between LRM and NLRM and the acid-basic potentiometric titration elucidated that acid-leaching procedure affected the root material sorption sites once only two predominant sorption sites were found for LRM (phenolic and amine, both able cations sorption) and five sorption sites (two carboxylic, amine and two phenolic) were founded for NLRM.     

Combination of ozonation with conventional aerobic oxidation for distillery wastewater treatment

Laboratory-scale experiments were conducted in order to investigate the effect of ozone as pre-aerobic treatment and post-aerobic treatment for the treatment of the distillery wastewater. The degradation of the pollutants present in distillery spent wash was carried out by ozonation, aerobic biological degradation processes alone and by using the combinations of these two processes to investigate the synergism between the two modes of wastewater treatment and with the aim of reducing the overall treatment costs. Pollutant removal efficiency was followed by means of global parameters directly related to the concentration of organic compounds in those effluents: chemical oxygen demand (COD) and the color removal efficiency in terms of absorbance of the sample at 254 nm. Ozone was found to be effective in bringing down the COD (up to 27%) during the pretreatment step itself. In the combined process, pretreatment of the effluent led to enhanced rates of subsequent biological oxidation step, almost 2.5 times increase in the initial oxidation rate has been observed. Post-aerobic treatment with ozone led to further removal of COD along with the complete discoloration of the effluent. The integrated process (ozone-aerobic oxidation-ozone) achieved approximately 79% COD reduction along with discoloration of the effluent sample as compared to 34.9% COD reduction for non-ozonated sample, over a similar treatment period.     

Heavy metal-rich wastes sequester in mineral phases through a glass-ceramic process

Certain sludges generated by industry are rich in contaminating elements and are a major environmental problem. In this study, we determine the ability of these contaminating elements to be incorporated into a glass-matrix and in various mineral phases after a crystallization process. The contaminating elements studied were obtained from sewage sludges (SS) and galvanic sludges (GS), our raw materials. The sludge samples were taken from urban wastewater treatment plant in Catalonia (NE Spain) with high levels of phosphorus oxide (P(2)O(5)). In silica glasses, P(2)O(5) acts as a network former. We determined the chemical composition of both the SS and GS, as well as their thermal behaviour by differential thermal analysis and thermal gravimetric analysis (DTA-TG) to obtain their melting curves. The vitreous transition temperature of the obtained glass was established by dilatometer technique at 725 degrees C. The DTA-TG curve of the glass obtained has an exothermal wide peak at 860 degrees C corresponding to crystallization of the two phases: a spinel phase and a phosphate phase. A second exothermal wide peak at 960 degrees C was attributed to the crystallization of aluminium pyroxene, anorthite and fluor-apatite, with two exothermal phenomena attributed to the evolution of these phases. An exothermal peak at 1100 degrees C was attributed to gehlenite crystallization. Scanning electron microscope observations and energy-dispersed X-ray spectroscopy microanalyses of glass-ceramic showed that the contaminating elements were concentrated in the spinel phases, which are the first phases to crystallize during the cooling of glass. Finally, the spinel structure permits the incorporation of all the contaminating elements into it.     

Dynamic equilibrium of radiocesium with stable cesium within the soil-mushroom system in Turkish pine forest

Mushrooms and soils collected from pine forests in Izmir, Turkey were measured for radiocesium and stable Cs in 2002. The ranges of (137)Cs and stable Cs concentrations in mushrooms were 9.84+/-1.67 to 401+/-3.85Bqkg(-1) dry weight and 0.040+/-0.004 to 11.3+/-1.09mgkg(-1) dry weight, respectively. The concentrations of (137)Cs and stable Cs in soils were 0.29+/-0.18 to 161+/-1.12Bqkg(-1) dry weight and 0.14+/-0.004 to 1.44+/-0.045mgkg(-1) dry weight, respectively. Even though different species were included, the concentration ratios of (137)Cs to stable Cs were fairly constant for samples collected at the same forest site, and were in the same order of magnitude as the (137)Cs to stable Cs ratios for the organic soil layers. The soil-to-mushroom transfer factors of (137)Cs and stable Cs were in the range of 0.19-3.15 and 0.17-12.3, respectively. The transfer factors of (137)Cs were significantly correlated to those of stable Cs.     

Future climate scenarios and rainfall--runoff modelling in the Upper Gallego catchment (Spain)

Global climate change may have large impacts on water supplies, drought or flood frequencies and magnitudes in local and regional hydrologic systems. Water authorities therefore rely on computer models for quantitative impact prediction. In this study we present kernel-based learning machine river flow models for the Upper Gallego catchment of the Ebro basin. Different learning machines were calibrated using daily gauge data. The models posed two major challenges: (1) estimation of the rainfall-runoff transfer function from the available time series is complicated by anthropogenic regulation and mountainous terrain and (2) the river flow model is weak when only climate data are used, but additional antecedent flow data seemed to lead to delayed peak flow estimation. These types of models, together with the presented downscaled climate scenarios, can be used for climate change impact assessment in the Gallego, which is important for the future management of the system.     

Promoting the O3 flux concept for European forest trees

Tropospheric ozone (O3) levels are predicted to stay high, being a factor within "global change" with potential effects on the carbon sink strength of forest trees. Hence, new approaches to O3 risk assessment and their validation are required, although appropriate databases for adult trees are scant. Approaches based on external O3 exposure are presently being evaluated against the ones on O3 flux into leaves, as the cumulative uptake has the capacity for deriving O3 risk from cause-effect relationships. The effective dose, however, needs to account for the trees' O3 defence and tolerance in addition to O3 uptake. The current status of promoting the preferable mechanistic O3 flux concept is highlighted for major regions of Europe, addressing refinements and simplifications needed for routine use. At the pan-European scale, however, the flux-based concept is ready for use in O3 risk assessment and has the potential of meso-scale application at the forest ecosystem level.     

Estimates of ambient background concentrations of trace metals in soils for risk assessment

Site-specific or soil type-specific ambient background concentrations (ABCs) of trace metals in soils are needed for risk assessment. We investigated three different methods for estimating ABCs in soils using a dataset of 5691 soil samples from England and Wales. The concentrations of Co, Cr and Ni were strongly associated with Al and Fe, and multiple regressions explained 62-85% of their variation, and Al and Fe can therefore be used to predict ABCs for these metals. Soil texture had a major influence on the concentrations of Cd, Co, Cr, Cu, Ni and Zn, and the medians were 3-5 fold higher in clayey than in sandy soils. This was used to predict texture-specific ABCs. Lead concentration was higher in acidic peaty soils than in other soils. A probability graph method was used to estimate ABC for Pb in a population of relatively uncontaminated soils. Potential applications of ABCs are discussed.