Electrooxidation of industrial wastewater containing 1,4-dioxane in the presence of different salts

The treatment of 1,4-dioxane solution by electrochemical oxidation on boron-doped diamond was studied using a central composite design and the response surface methodology to investigate the use of SO₄ ^2? and HCO₃ ^? as supporting electrolytes considering the applied electric current, initial chemical oxygen demand (COD) value, and treatment time. Two industrial effluents containing bicarbonate alkalinity, one just carrying 1,4-dioxane (S1), and another one including 1,4-dioxane and 2-methyl-1,3-dioxolane (S2), were treated under optimized conditions and subsequently subjected to biodegradability assays with a Pseudomonas putida culture. Electrooxidation was compared with ozone oxidation (O₃) and its combination with hydrogen peroxide (O₃/H₂O₂). Regarding the experimental design, the optimal compromise for maximum COD removal at minimum energy consumption was shown at the maximum tested concentrations of SO₄ ^2? and HCO₃ ^? (41.6 and 32.8 mEq L^?1, respectively) and the maximum selected initial COD (750 mg L^?1), applying a current density of 11.9 mA cm^?2 for 3.8 h. Up to 98 % of the COD was removed in the electrooxidation treatment of S1 effluent using 114 kWh per kg of removed COD and about 91 % of the COD from S2 wastewater applying 49 kWh per kg of removed COD. The optimal biodegradability enhancement was achieved after 1 h of electrooxidation treatment. In comparison with O₃ and O₃/H₂O₂ alternatives, electrochemical oxidation achieved the fastest degradation rate per oxidant consumption unit, and it also resulted to be the most economical treatment in terms of energy consumption and price per unit of removed COD.     

Influence of the geomembrane on time-lapse ERT measurements for leachate injection monitoring

Leachate recirculation is a key process in the operation of municipal waste landfills as bioreactors. To quantify the water content and to evaluate the leachate injection system, in situ methods are required to obtain spatially distributed information, usually electrical resistivity tomography (ERT). However, this method can present false variations in the observations due to several parameters. This study investigates the impact of the geomembrane on ERT measurements. Indeed, the geomembrane tends to be ignored in the inversion process in most previously conducted studies. The presence of the geomembrane can change the boundary conditions of the inversion models, which have classically infinite boundary conditions. Using a numerical modelling approach, the authors demonstrate that a minimum distance is required between the electrode line and the geomembrane to satisfy the good conditions of use of the classical inversion tools. This distance is a function of the electrode line length (i.e. of the unit electrode spacing) used, the array type and the orientation of the electrode line. Moreover, this study shows that if this criterion on the minimum distance is not satisfied, it is possible to significantly improve the inversion process by introducing the complex geometry and the geomembrane location into the inversion tools. These results are finally validated on a field data set gathered on a small municipal solid waste landfill cell where this minimum distance criterion cannot be satisfied.     

Threats to intact tropical peatlands and opportunities for their conservation

Large, intact areas of tropical peatland are highly threatened at a global scale by the expansion of commercial agriculture and other forms of economic development. Conserving peatlands on a landscape scale, with their hydrology intact, is of international conservation importance to preserve their distinctive biodiversity and ecosystem services and maintain their resilience to future environmental change. We explored threats to and opportunities for conserving remaining intact tropical peatlands; thus, we excluded peatlands of Indonesia and Malaysia, where extensive deforestation, drainage, and conversion to plantations means conservation in this region can protect only small fragments of the original ecosystem. We focused on a case study, the Pastaza‐Marañón Foreland Basin (PMFB) in Peru, which is among the largest known intact tropical peatland landscapes in the world and is representative of peatland vulnerability. Maintenance of the hydrological conditions critical for carbon storage and ecosystem function of peatlands is, in the PMFB, primarily threatened by expansion of commercial agriculture linked to new transport infrastructure that is facilitating access to remote areas. There remain opportunities in the PMFB and elsewhere to develop alternative, more sustainable land‐use practices. Although some of the peatlands in the PMFB fall within existing legally protected areas, this protection does not include the most carbon‐dense (domed pole forest) areas. New carbon‐based conservation instruments (e.g., REDD+, Green Climate Fund), developing markets for sustainable peatland products, transferring land title to local communities, and expanding protected areas offer pathways to increased protection for intact tropical peatlands in Amazonia and elsewhere, such as those in New Guinea and Central Africa which remain, for the moment, broadly beyond the frontier of commercial development.     

Fine‐resolution conservation planning with limited climate‐change information

Climate‐change induced uncertainties in future spatial patterns of conservation‐related outcomes make it difficult to implement standard conservation‐planning paradigms. A recent study translates Markowitz's risk‐diversification strategy from finance to conservation settings, enabling conservation agents to use this diversification strategy for allocating conservation and restoration investments across space to minimize the risk associated with such uncertainty. However, this method is information intensive and requires a large number of forecasts of ecological outcomes associated with possible climate‐change scenarios for carrying out fine‐resolution conservation planning. We developed a technique for iterative, spatial portfolio analysis that can be used to allocate scarce conservation resources across a desired level of subregions in a planning landscape in the absence of a sufficient number of ecological forecasts. We applied our technique to the Prairie Pothole Region in central North America. A lack of sufficient future climate information prevented attainment of the most efficient risk‐return conservation outcomes in the Prairie Pothole Region. The difference in expected conservation returns between conservation planning with limited climate‐change information and full climate‐change information was as large as 30% for the Prairie Pothole Region even when the most efficient iterative approach was used. However, our iterative approach allowed finer resolution portfolio allocation with limited climate‐change forecasts such that the best possible risk‐return combinations were obtained. With our most efficient iterative approach, the expected loss in conservation outcomes owing to limited climate‐change information could be reduced by 17% relative to other iterative approaches.     

Production costs and operative margins in electric energy generation from biogas. Full-scale case studies in Italy

The purpose of this study was to observe the economic sustainability of three different biogas full scale plants, fed with different organic matrices: energy crops (EC), manure, agro-industrial (Plants B and C) and organic fraction of municipal solid waste (OFMSW) (Plant A). The plants were observed for one year and total annual biomass feeding, biomass composition and biomass cost (€ Mg^?1), initial investment cost and plant electric power production were registered. The unit costs of biogas and electric energy (€ Sm^?3_biogas, € kW h^?1_EE) were differently distributed, depending on the type of feed and plant. Plant A showed high management/maintenance cost for OFMSW treatment (0.155 € Sm^?3_biogas, 45% of total cost), Plant B suffered high cost for EC supply (0.130 € Sm^?3_biogas, 49% of total cost) and Plant C showed higher impact on the total costs because of the depreciation charge (0.146 € Sm^?3_biogas, 41% of total costs). The breakeven point for the tariff of electric energy, calculated for the different cases, resulted in the range 120–170 € MW h^?1_EE, depending on fed materials and plant scale. EC had great impact on biomass supply costs and should be reduced, in favor of organic waste and residues; plant scale still heavily influences the production costs. The EU States should drive incentives in dependence of these factors, to further develop this still promising sector.     

Implications of human value shift and persistence for biodiversity conservation

Large‐scale change in human values and associated behavior change is believed by some to be the ultimate solution to achieve global biodiversity conservation. Yet little is known about the dynamics of values. We contribute to this area of inquiry by examining the trajectory of values affecting views of wildlife in North America. Using data from a 19‐state study in the United States and global data from the Schwartz Value Survey, we explored questions of value persistence and change and the nature of attitudinal responses regarding wildlife conservation issues. We found support, based on subjects’ ancestry, for the supposition that domination is a prevalent American value orientation toward wildlife that has origins in European Judeo‐Christian traditions. Independent of that effect, we also found indications of change. Modernization is contributing to a shift from domination to mutualism value orientations, which is fostering attitudes less centered on human interests and seemingly more consistent with a biocentric philosophy. Our findings suggest that if value shift could be achieved in a purposeful way, then significant and widespread behavior change believed necessary for long‐term conservation success may indeed be possible. In particular, greater emphasis on mutualism values may help provide the context for more collaborative approaches to support future conservation efforts. However, given the societal forces at play, it is not at all clear that human‐engineered value shift is tenable. Instead of developing strategies aimed at altering values, it may be more productive to create strategies that recognize and work within the boundaries of existing values. Whereas values appear to be in a period of flux, it will be difficult to predict future trends without a better understanding of value formation and shift, particularly under conditions of rapid social‐ecological change.     

Archaeometric researches on the provenance of Mediterranean Archaic Phoenician and Punic pottery

The aim of this study is to setup a first chemical database that could represent the starting point for a reliable classification method to discriminate between Archaic Phoenician and Punic pottery on the base of their chemical data. This database up to now can discriminate between several different areas of production and provenance and can be applied also to unknown ceramic samples of comparable age and production areas. More than 100 ceramic fragments were involved in this research, coming from various archaeological sites having a crucial importance in the context of the Phoenician and Punic settlement in central and western Mediterranean: Carthage (Tunisia), Toscanos (South Andalusia, Spain), Sulci, Monte Sirai, Othoca, Tharros (Sardinia, Italy) and Pithecusa (Campania, Italy). Since long-time archaeologists hypothesised that Mediterranean Archaic Phoenician and Punic pottery had mainly a local or just a regional diffusion, with the exception of some particular class like transport amphorae. To verify the pottery provenance, statistical analyses were carried out to define the existence of different ceramic compositional groups characterised by a local origin or imported from other sites. The existing literature data are now supplemented by new archaeometric investigations both on Archaic Phoenician ceramics and clayey raw materials from Sardinia. Therefore, diffractometric analyses, optical microscopy observations and X-ray fluorescence analyses were performed to identify the mineralogical and chemical composition of Othoca ceramics and clayey raw material. The obtained results were then compared with own literature data concerning Phoenician and Punic pottery in order to find features related to the different ceramic productions and their provenance. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were also performed on the chemical compositional data in order to discriminate ceramic groups. A very complex situation was found: imported ceramics coming from Carthage, with a large-scale distribution, were found together with a predominant local production pottery. The archaeometric results demonstrate that historical and typological approach has to be supported by scientific analyses to better understand local or Mediterranean exchanges.