Genotoxicity of chromium in vitro on yeast: Interaction with DNA†

The genotoxicity of chromium chloride was investigated in cells of D₇ strain of Saccharomyces cerevisiae harvested either from logarithmic or stationary growth phase.

A weak induction of mifotic gene conversion and point reverse mutation was obtained when the incubations were performed using phosphate buffer. No genetic effect was observed when the incubations were performed using Tris‐HCl buffer.

The experiments with ⁵¹Cr radiotracer demonstrated that Cr³⁺ ion enters the yeast cells and binds to DNA even if the incubation mixture was performed with Tris HCl buffer. This behaviour could be due to the highest concentration of CrCl₃ that cause some damages to cytoplasmatic membrane.     

Limits of thermoluminescence dosimetry using quartz extracted from recent building materials in urban settlements

The luminescence of quartz extracted from recently fired building material is known to detect doses of few mGy and can be successfully employed in the case of large scale radiation exposures due to nuclear accidents or terrorist acts. One brick and two tiles (50-80 years range) collected from an urban settlement were used to test the realistic minimum detectable dose limits of retrospective luminescence dosimetry. Independent methods like alpha counting, beta dosimetry, gamma spectrometry and flame photometry were used for the annual dose assessment. Two approaches were employed for the evaluation of the total accrued dose: regenerative dose and additive dose. The former allows the assessment of doses due to anthropogenic sources of radiation as low as approximately 12 mGy by using 10-year-old samples, but it can be applied only in samples showing no sensitisation. The latter can be applied to any sample, however, the related uncertainty is higher and minimum detectable anthropogenic dose in young samples amounts to 20 mGy.     

Evaluation of landfill leachate treatment by advanced oxidative process by Fenton’s reagent combined with membrane separation system

A high content of refractory organic matter, ammonia and toxic compounds is characteristic of landfill leachate. Advanced oxidative processes (AOPs) are an attractive alternative for landfill leachate treatment. However, when applied as a unique process treatment, they do not provide a complete solution for the effluent treatment. Combining AOP with a membrane separation process (MSP) presents a number of benefits and provides an adequate solution for this problem. With this in mind, the present work aims to evaluate, using a bench scale, leachate treatability through AOP by Fenton’s reagent (AOP/Fenton) combined with microfiltration (MF) and nanofiltration (NF). A high efficient removal of COD (63%), true color (76%) and humic substances (50%) was observed during AOP/Fenton under optimized conditions (1.7 g H₂O₂/g COD_{raw leachate}; FeSO₄·7H₂O:H₂O₂ = 1:5.3; pH = 3.8; reaction conditions = 115 rpm/28 min). According to the evaluated parameters, MSP presented an efficient complementary treatment, in which the integrity of the stages was sufficient for reaching regulatory levels in the effluent (Deliberação Normativa Conjunta COPAM/CERH-MG N^o. 1, May 5, 2008).     

Stable isotope signatures for characterising the biological stability of landfilled municipal solid waste

Stable isotopic signatures of landfill leachates are influenced by processes within municipal solid waste (MSW) landfills mainly depending on the aerobic/anaerobic phase of the landfill. We investigated the isotopic signatures of δ¹³C, δ²H and δ¹⁸O of different leachates from lab-scale experiments, lysimeter experiments and a landfill under in situ aeration. In the laboratory, columns filled with MSW of different age and reactivity were percolated under aerobic and anaerobic conditions. In landfill simulation reactors, waste of a 25 year old landfill was kept under aerobic and anaerobic conditions. The lysimeter facility was filled with mechanically shredded fresh waste. After starting of the methane production the waste in the lysimeter containments was aerated in situ. Leachate and gas composition were monitored continuously. In addition the seepage water of an old landfill was collected and analysed periodically before and during an in situ aeration.We found significant differences in the δ¹³C-value of the dissolved inorganic carbon (δ¹³C-DIC) of the leachate between aerobic and anaerobic waste material. During aerobic degradation, the signature of δ¹³C-DIC was mainly dependent on the isotopic composition of the organic matter in the waste, resulting in a δ¹³C-DIC of ?20‰ to ?25‰. The production of methane under anaerobic conditions caused an increase in δ¹³C-DIC up to values of +10‰ and higher depending on the actual reactivity of the MSW. During aeration of a landfill the aerobic degradation of the remaining organic matter caused a decrease to a δ¹³C-DIC of about ?20‰. Therefore carbon isotope analysis in leachates and groundwater can be used for tracing the oxidation–reduction status of MSW landfills.Our results indicate that monitoring of stable isotopic signatures of landfill leachates over a longer time period (e.g. during in situ aeration) is a powerful and cost-effective tool for characterising the biodegradability and stability of the organic matter in landfilled municipal solid waste and can be used for monitoring the progress of in situ aeration.     

Leaching behaviour of different scrap materials at recovery and recycling companies: Full-, pilot- and lab-scale investigation

Scrap material recovery and recycling companies are confronted with waste water that has a highly fluctuating flow rate and composition. Common pollutants, such as COD, nutrients and suspended solids, potentially toxic metals, polyaromatic hydrocarbons and poly chlorinated biphenyls can exceed the discharge limits. An analysis of the leaching behaviour of different scrap materials and scrap yard sweepings was performed at full-scale, pilot-scale and lab-scale in order to find possible preventive solutions for this waste water problem. The results of these leaching tests (with concentrations that frequently exceeded the Flemish discharge limits) showed the importance of regular sweeping campaigns at the company, leak proof or covered storage of specific scrap materials and oil/water separation on particular leachates. The particulate versus dissolved fraction was also studied for the pollutants. For example, up to 98% of the polyaromatic hydrocarbons, poly chlorinated biphenyls and some metals were in the particulate form. This confirms the (potential) applicability of sedimentation and filtration techniques for the treatment of the majority of the leachates, and as such the rainwater run-off as a whole.     

Book reviews

Cost Benefit Analysis of Environmental Change

Per‐Olov Johansson

Cambridge, Cambridge University Press, 1993, 232 pp., £13.95

Computerised Environmental Modelling: A Practical Introduction using Excel

J. Hardisty, D. M. Taylor & S. E. Metcalfe

Chichester, Wiley, 1993, 204 pp., £14.95

Keeping Pace with Science and Engineering: Case Studies in Environmental Regulation

Washington DC, US National Academy of Engineering, 1993

World Without End: Economics, Environment and Sustainable Development

D. W. Pearce & J. J. Warford

Oxford University Press, New York, 1993, 440 pp., £35.95     

APPLICATION OF ADVANCES IN FLOOD FREQUENCY ANALYSIS1

ABSTRACT: Flood frequency analyses are frequently being made using widely available computer programs. Serious errors can result from blind acceptance of such results. Visual interpretation of observed flood series can be used for evaluation on frequency paper with compatible scales. Such frequency papers are presented in the paper. In ephemeral streams, more infrequent floods may constitute a separate set from the more frequent floods because (a) runoff producing storms cover only a portion of the contributing area, (b) transmission losses in the normally dry streambed may reduce the peak flow, and (c) some runoff may be stored in stock water ponds which therefore leads to partial area runoff. The Cunnane plotting position used in this paper is superior to the more widely used Weibull equation, having a mathematically sound basis for locating observed floods on an assumed probability.     

Estimating Crop Water Use via Remote Sensing Techniques vs. Conventional Methods in the South Platte River Basin,Colorado

We compared two methods of estimating crop water consumption to assess whether remote sensing techniques provide consumptive use (CU) estimates commensurate with conventional methods. Using available historical satellite and meteorological data, we applied Mapping EvapoTranspiration at high Resolution using Internalized Calibration (METRIC) to 317,455 ha in the South Platte basin, in northeastern Colorado, for the 2001 irrigation season. We then compared these derived CU estimates with values calculated by using the Colorado Water Conservation Board's South Platte Decision Support System StateCU model. Evaluating the data by irrigation ditch service area, we disaggregated the output to allow for comparison by service area size, crop type, irrigation method, water supply source, and water availability. We concluded that METRIC is a suitable alternative to StateCU in the South Platte basin and could help to identify areas with inhibited crop growth or deficit irrigation practices. In addition, METRIC could be used as a complement to StateCU to refine StateCU model parameters, allowing for more accurate estimates of crop water shortages and groundwater recharge associated with irrigation delivery and application.