Sequential extraction of heavy metals during composting of sewage sludge

The major limitation of soil application of sewage sludge compost is the total heavy metal contents and their bioavailability to the soil-plant system. This study was conducted to determine the heavy metal speciation and the influence of changing the physico-chemical properties of the medium in the course of composting on the concentrations, bioavailability or chemical forms of Cu, Zn, Pb and Ni in sewage sludge. Principal physical and chemical properties and FTIR spectroscopical characterization of sludge compost during treatment show the stability and maturity of end product. The total metal contents in the final compost were much lower than the limit values of composts to be used as good soil fertilizer. Furthermore, it was observed by using a sequential extraction procedure in sludge compost at different steps of treatment, that a large proportion of the heavy metals were associated to the residual fraction (70-80%) and more resistant fractions to extraction X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of metals bound to bioavailable fractions X-(KNO3+H2O). Heavy metal distribution and bioavailability show some changes during composting depending on the metal itself and the physico-chemical properties of the medium. Bioavailable fractions of all elements tend to decrease except Ni-H2O. Zn and mainly Cu present more affinity to organic and carbonate fractions. In contrast, Pb is usually preferentially bound to sulfide forms X-HNO3. Nickel shows a significant decrease of organic form. Significant degrees of correlation were found between heavy metal fractions and changes of some selected variables (e.g. pH, ash, organic matter, humic substance) during the course of composting. Mobile fractions of metals are poorly predictable from the total content. The R2 value was significantly increased by the inclusion of other variables such as the amount of organic matter (OM) and pH.     

Correlation between physicochemical and ecotoxicological approaches to estimate landfill leachates toxicity

Leachates from municipal solid waste (MSW) landfills may contain a huge diversity of contaminants; these wastewaters should be considered as potentially hazardous complex mixtures, representing a potential environmental risk for surface and groundwater. Current MSW landfill wastes regulatory approaches deem exclusively on the physicochemical characterization and does not contemplate the ecotoxicological assessment of landfill leachates. However, the presence of highly toxic substances in consumer products requires reconsideration on the need of more specific ecotoxicological assessments. The main aim of this study was to evaluate the toxicity of different MSW landfill leachates using a battery of toxicity tests including acute toxicity tests with Daphnia magna and the anuran Xenopus laevis and the in vitro toxicity test with the fish cell line RTG-2. The additional objective was to study the possible correlation between physicochemical properties and the toxicity results obtained for untreated landfill leachates. The results showed that the proposed test battery was effective for the ecotoxicological characterization of MSW landfill leachates. A moderate to strong correlation between the measured physicochemical parameters and the calculated toxicity units was detected for all toxicity assays. Correlation factors of 0.85, 0.86 and 0.55 for Daphnia, Xenopus and RTG-2 tests, respectively, were found. The discriminant analysis showed that certain physicochemical parameters could be used for an initial categorization of the potential aquatic acute toxicity of leachates; this finding may facilitate leachates management as the physicochemical characterization is currently the most common or even only monitoring method employed in a large majority of landfills. Ammonia, alkalinity and chemical oxygen demand (COD), together with chloride, allowed a proper categorization of leachates toxicity for up to 75% of tested samples, with a small percentage of false negatives.     

Controlled drainage and wetlands to reduce agricultural pollution: a lysimetric study

Controlled drainage and wetlands could be very effective practices to control nitrogen pollution in the low-lying agricultural plains of northeast Italy, but they are not as popular as in other countries. An experiment on lysimeters was therefore carried out in 1996-1998, with the double aim of obtaining local information to encourage the implementation of these practices and to gain more knowledge on the effects involved. Controlled drainage + subirrigation and wetlands were all considered as natural systems where alternative water table management could ameliorate water quality, and were compared with a typical water management scheme for crops in the open field. Eight treatments were considered: free drainage on maize (Zea mays L.) and sugarbeet (Beta vulgaris L.), two treatments of controlled drainage on the same crops, and five wetland treatments using common reed [Phragmites australis (Cav.) Trin. ex Steud.], common cattail (Typha latifolia L.), and tufted sedge (Carex elata All.), with different water table or flooding levels. Lysimeters received about 130 g m 2 of N with fertilization and irrigation water, with small differences among treatments. The effects of treatments were more evident for NO3-N concentrations than for the other chemical parameters (total Kjeldahl nitrogen, pH, and electrical conductivity), with significantly different medians among free drainage (33 mg L(-1)), controlled drainage (1.6 and 2.6 mg L(-1)), and wetlands (0.5-0.7 mg L(-1)). Referring to free drainage, NO3-N losses were reduced by 46 to 63% in controlled drainage and 95% in the average of wetlands. Wetlands also reduced losses of total dissolved solids from 253 g m(-2) (average of crop treatments) to 175 g m(-2) (average of wetlands).     

Silvicultural management in maintaining biodiversity and resistance of forests in Europe-the Mediterranean region

Outstanding features of Mediterranean forest area are highlighted with a special reference to biodiversity and connections with forest management. The naturally originated and anthropogenic progress of the mosaic-like evolution, as well as the man-induced factors and natural constraints are described. The past and present close linkages between management and biodiversity are then analysed by means of a few, outstanding cases typical of the geographical region. The management shift on increasing economically marginal forest area (abandonment) appears to be the major force currently driving connections with inherent and associated biodiversity. The goals following the new-established environmental roles of forests have shifted towards adaptive management, namely the implementation of locally tailored rules in accordance with prominent forest functions. Key priorities to face up to the new scenarios are then discussed.Economic and policy implications are addressed with reference to multipurpose forestry and the related annual flow of outputs. It is shown the role of water-related services, as well the provision of various non-wood forest products and public goods in addition to wood and other traditional forest outputs. Reference is also made to the dualism between the Northern and the South-Eastern Mediterranean countries due to different level of economic development (and pressure of forest resources) together with very different institutional structures, i.e. public ownership in Southern and South-Eastern Mediterranean countries. Nevertheless, the situation is going to become more harmonious in the medium run by growing economic development, the affirmation of local rights on forest resources, globalisation and, above all, rural out migration and exchanges of peoples confirming the traditional role of the Mediterranean Region at cross road of South-North and Eastern-Western cultures.     

Efforts to Reduce Mortality to Hydroelectric Turbine-Passed Fish: Locating and Quantifying Damaging Shear Stresses

Severe fluid forces are believed to be a source of injury and mortality to fish that pass through hydroelectric turbines. A process is described by which laboratory bioassays, computational fluid dynamics models, and field studies can be integrated to evaluate the significance of fluid shear stresses that occur in a turbine. Areas containing potentially lethal shear stresses were identified near the stay vanes and wicket gates, runner, and in the draft tube of a large Kaplan turbine. However, under typical operating conditions, computational models estimated that these dangerous areas comprise less than 2% of the flow path through the modeled turbine. The predicted volumes of the damaging shear stress zones did not correlate well with observed fish mortality at a field installation of this turbine, which ranged from less than 1% to nearly 12%. Possible reasons for the poor correlation are discussed. Computational modeling is necessary to develop an understanding of the role of particular fish injury mechanisms, to compare their effects with those of other sources of injury, and to minimize the trial and error previously needed to mitigate those effects. The process we describe is being used to modify the design of hydroelectric turbines to improve fish passage survival.     

Degradation of sodium 4-dodecylbenzenesulphonate photoinduced by Fe(III) in aqueous solution

The Fe(III)-photoinduced degradation of 4-dodecylbenzenesulphonate (DBS) in aqueous solution was investigated. The mixing of DBS (1 mm) and Fe(III) (1 mm) solutions immediately led to the formation of a precipitate that contained DBS and monomeric Fe(OH)2+, the predominant Fe(III) species. Both species were also present in the supernatant. Irradiation of the supernatant solution resulted in a photoredox process that yielded Fe(II) and *OH radicals. The disappearance of DBS was shown to involve only attack by *OH radicals; the quantum yield of DBS disappearance is similar to the quantum yield of *OH radical formation. A wavelength effect was also observed; the rate of DBS disappearance was higher for shorter wavelength irradiation. Five photoproducts, all containing the benzene sulphonate group, were identified. *OH radicals preferentially abstract hydrogen from the carbon in the alpha position of the aromatic ring. The results show that the Fe(III)-photoinduced degradation of DBS could be used as an alternative method for polluted water treatment.     

Estimates of black carbon and size-resolved particle number emission factors from residential wood burning based on ambient monitoring and model simulations

In this paper we derive typical emission factors for coarse particulate matter (PM(10)), oxides of nitrogen (NO(x)), black carbon (BC), and number particle size distributions based on a combination of measurements and air quality dispersion modeling. The advantage of this approach is that the emission factors represent integrated emissions from several vehicle types and different types of wood stoves. Normally it is very difficult to estimate the total emissions in cities on the basis of laboratory measurements on single vehicles or stoves because of the large variability in conditions. The measurements were made in Temuco, Chile, between April 18 and June 15, 2005 at two sites. The first one was located in a residential area relatively far from major roads. The second site was located in a busy street in downtown Temuco where wood consumption is low. The measurements support the assumption that the monitoring sites represent the impact of different emission sources, namely traffic and residential wood combustion (RWC). Fitting model results to the available measurements, emission factors were obtained for PM(10) (RWC = 2160 +/- 100 mg/kg; traffic = 610 +/- 51 mg/veh-km), NO(x) (RWC = 800 +/- 100 mg/kg; traffic = 4400 +/- 100 mg/veh-km), BC (RWC = 74 +/- 6 mg/kg; traffic = 60 +/- 3 mg/veh-km) and particle number (N) with size distribution between 25 and 600 nm (N(25-600)) (RWC = 8.9 +/- 1 x 10(14) pt/kg; traffic = 6.7 +/- 0.5 x 10(14) pt/veh-km). The obtained emission factors are comparable to results reported in the literature. The size distribution of the N emission factors for traffic was shown to be different than for RWC. The main difference is that although traffic emissions show a bimodal size distribution with a main mode below 30 nm and a secondary one around 100 nm, RWC emissions show the main mode slightly below 100 nm and a smaller nucleation mode below 50 nm.     

Occurrence and distribution of triclosan in the German Bight (North Sea)

The potential of triclosan (TCS) acting as an endocrine disruptor has led to growing concern about the presence of TCS in the environment. In this study, seawater samples were collected from the German Bight during sampling campaigns conducted with the German research ships Gauss and Ludwig Prandtl. TCS was determined both in the dissolved phase and in the suspended particulate matters with concentrations ranging 0.8-6870 pg L⁻¹ and <1-95 pg L⁻¹, respectively. High concentrations of TCS were present in the estuaries of the Elbe and the Weser, indicating significant input of TCS by the river discharge. The correlation coefficient (R²) between the dissolved concentration and salinity was 0.79 for the data obtained from the Gauss cruise, showing an obvious declining trend from the coast to the open sea.     

Regional differences and sources of organochlorine pesticides in soils surrounding chemical industrial parks

Concentrations of organochlorine pesticides (OCPs; dichlorodiphenyltrichloroethanes (DDTs), hexachlorocyclohexanes (HCHs), hexachlorobenzene (HCB)) were investigated in 105 soil samples collected in vicinity of the chemical industrial parks in Tianjin, China. OCP concentrations significantly varied in the study area, high HCH and DDT levels were found close to the chemical industrial parks. The intensity of agricultural activity and distance from the potential OCP emitters have important influences on the OCP residue distributions. Principal component analysis indicates that HCH pollution is a mix of historical technical HCH and current lindane pollution and DDT pollution input is only due to technical DDT sources. The significant correlations of OCP compounds reveal that HCHs, DDTs and HCB could have some similar sources of origin.