改性麦草秸秆对水中磷酸根吸附效果的研究

为实现农作物秸秆资源化,解决水体富营养化问题,将麦草秸秆化学改性成一种可以有效吸附水体中磷酸根的阳离子型吸附剂.考察了吸附剂投加量、磷酸根溶液初始pH、温度等因素对吸附效果的影响,分析了改性麦草秸秆对磷酸根的吸附动力学过程和吸附机理.结果表明,在吸附剂投加量为4 g·L-1和磷酸根溶液初始pH为4.0～7.5条件下,改性麦草秸秆对磷酸根的吸附效果最好,去除率均高于90%;改性麦草秸秆对磷酸根的吸附符合Freundlich等温模式,饱和吸附容量为2.38 mmol·g-1;吸附过程符合一级反应动力学方程,为快速反应过程;反应活化能为12.6 kJ·mol-1,反应速率对温度的变化不敏感.     

Particle generation by ultraviolet-laser ablation during surface decontamination

A novel photonic decontamination method was developed for removal of pollutants from material surfaces. Such a method relies on the ability of a high-energy laser beam to ablate materials from a contaminated surface layer, thus producing airborne particles. In this paper, the authors presented the results obtained using a scanning mobility particle sizer (SMPS) system and an aerosol particle sizer (APS). Particles generated by laser ablation from the surfaces of cement, chromium-embedded cement, and alumina were experimentally investigated. Broad particle distributions from nanometer to micrometer in size were measured. For stainless steel, virtually no particle > 500 nm in aerodynamic size was detected. The generated particle number concentrations of all three of the materials were increased as the 266-nm laser fluence (millijoules per square centimeter) increased. Among the three materials tested, cement was found to be the most favorable for particle removal, alumina next, and stainless steel the least. Chromium (dropped in cement) showed almost no effects on particle production. For all of the materials tested except for stainless steel, bimodal size distributions were observed; a smaller mode peaked at approximately 50-70 nm was detected by SMPS and a larger mode (peaked at approximately 0.70-0.85 microm) by APS. Based on transmission electron microscopy observations, the authors concluded that particles in the range of 50-70 nm were aggregates of primary particles, and those of size larger than a few hundred nanometers were produced by different mechanisms, for example, massive object ejection from the material surfaces.     

负载MnO2陶瓷膜催化臭氧氧化处理石化污水反渗透浓水

采用陶瓷膜催化臭氧氧化技术处理石化污水反渗透浓水.考察了MnO2/Al2O3陶瓷膜和Al2O3陶瓷膜对臭氧分解率、羟基自由基浓度以及水中有机物处理效果的影响.实验结果表明:MnO2/Al2O3陶瓷膜能够显著提高臭氧分解率,生成的羟基自由基浓度相比单独臭氧体系提高了21.2％;在臭氧投加量为50 mg/L时,MnO2/A...     

不同基质人工湿地处理含氨氮地下水过程中氮素形态转化的时空特征

构建火山岩、砾石、沸石、椰壳活性炭、K3悬浮填料和聚氨酯泡沫为基质的6组实验室规模垂直流人工湿地,对比分析各湿地系统对含氨氮地下水的净化效果,同时考察不同基质湿地系统在一个水力停留时间(48 h)内氮素形态转化的时空特征.结果表明:沸石湿地系统对氨氮、T N的去除效果最好,平均去除率分别为97.39％、94.26％,聚...     

都市农业生态系统中污水资源化利用

文章介绍了都市农业生态系统中的污水处理工艺和资源化利用方案,并对回用过程中的水质状况进行了连续监测与分析,结果表明,主要污染物CODCr、BOD5、浊度、TN的去除率均达到90%以上。再生水完全可以满足系统内农业灌溉的要求,每年可减少50%的地下水开采量,且提供了良好的景观资源。蟹岛生态度假村以生活污水处理为中心的水资源循环利用方式,为污水资源化利用工程作了有益的尝试并取得了良好的效果。     

环境管理日常监督检查的规范化

介绍了洛阳分公司在环境管理中实施的一套有效的日常监督检查机制,及时发现和纠正偏差,提高了环境管理体系的运行效率。     

弹药库房密闭期间有害气体的分析

弹药在长期储存过程中,受储存环境影响,其装药会发生缓慢的分解、水解反应,产生易燃易爆及有害气体.为深入研究弹药在密闭过程中有害气体对弹药库房及人员可能造成的危害,对弹药库房密闭期间产生的有毒、有害及可燃气体成分作定性和定量检测,深入分析影响弹药安全和人员身体健康的有害气体的测试结果.     

油品运输罐车呼吸阀阻火器设计与应用

针对油品运输罐车呼吸阀难以防火、防爆的安全隐患 ,设计安装油品运输罐车呼吸阀阻火器 ,提高了油品罐车的防火、防爆性能     

Experimental study on non-destructive testing of rock bolts based on pseudo-random signal

The quality of rock bolt anchoring is closely related to the stability and safety of underground engineering and slope protection. In this paper, non-destructive testing of rock bolts is proposed based on pseudo-random signal, owing to the deficiencies of the conventional detecting method of stress wave reflection. The characteristics of pseudo-random signal for non-destructive testing of rock bolts are introduced. And the rock bolts are tested in the experiment, the time of reflection wave is identified and the length of rock bolts is calculated through cross correlation analysis between the extracted wavelet signal and the test signal. It is proved that the testing results of non-destructive testing methods based on pseudo-random signal are of low deviation. The experiment has shown that non-destructive testing of rock bolts based on pseudo-random signal is feasible with high precision.     

Exploring the perceived influence of safety management practices on project performance in the construction industry

Although safety management is known to be vital to construction projects, very few studies have solicited views from construction practitioners about their perceptions of which safety management practices (SMPs) are important to construction projects and related to project performance. An empirical study was undertaken in Hong Kong in order to shed more light on this topic. In the study, the importance levels of 15 popular SMPs and five project performance criteria were rated by 232 respondents. An exploratory factor analysis was conducted, and three SMP categories - information, process, and committees - were extracted. Of these three categories, safety management process was perceived by the construction practitioners as being the most important, followed by safety management information and committees. Moreover, the effect of the three SMP categories on a composite project performance variable was tested using hierarchical regression analysis. Results indicate that the “information” and “committees” categories were associated with project performance positively and significantly. One of the major conclusions of the study is that the construction industry has paid relatively less attention to safety management committees, which were empirically analyzed as having a strong perceived impact on project performance. In order to improve project performance, construction companies should promote the criticality of safety management committees.