GW型加热炉烟气净化系统研究设计

为适应日益严格的环保要求,根据GW型燃油加热炉烟气排放特征和排放规律,设计采用循环流化床工艺进行除尘脱硫。中试结果表明:在最佳工况条件下,系统除尘效率可达97%～98%,脱硫效率达80%～90%,达到国家燃油锅炉一类区域排放标准要求。     

光气生产装置的危险性及事故统计分析

通过对光气、光气化生产工艺过程存在的危险性分析,笔者认为气相光气化工艺比液相光气化工艺危险性小,而固体光气化生产工艺与气、液相光气生产工艺相比,危险性更小。同时对国内外光气和光气化生产发生事故的原因进行分析探讨,指出事故的原因主要是由管道及设备缺陷、个体防护用品缺乏、设计缺陷及人为失误引起。采用固体光气替代光气参与各种有机合成,与液相或气相光气工艺相比具有安全、反应条件温和、易操作、工艺简便、反应计量准确等优点,因此,固体光气工艺发展前景广阔。     

我国健身器材质量和检验现状分析及其对策

笔者从产品质量、检测体系和质检监管等方面系统地阐述了我国健身器材产业的现状 ;通过对国内外健身器材产业的比较和分析 ,指出了我国健身器材产业普遍存在技术含量低 ,质量不稳定 ,检测标准和设备欠缺 ,服务不完善等突出问题 ;同时还具体探讨了国内外健身器材的安全要求和使用性能在生化和环保两方面的不足 ;就上述种种问题提出了相应的发展对策 ,即遵循“以人为本 ,保障安全”的原则 ,积极发展现代化生产企业 ,前瞻性地开发高技术含量的安全型产品 ,健全符合国情实际的检测体系 ,从而全面提升我国健身器材的安全性能、服务水平和市场竞争力     

关于拆除爆破的几点建议

随着科技进步和社会经济的飞速发展 ,在城市改 (扩 )建过程中 ,拆除建筑 (构 )物的爆破工程被广泛应用 ,而爆破安全却日益引起人们重视。笔者分析了我国城市建 (构 )筑物拆除爆破的安全现状 ,指出了城市建筑与危房在爆破拆除中存在的问题 ,提出了相应的一些改进办法和建议     

延边地区公路沿线边坡失稳试验分析

延边地区公路沿线分布着大量软岩，其岩性具有强膨胀性，致使这一地区公路边坡出现了多处滑坡现象。为了合理地处理这一工程地质问题，需要认真研究该种软岩的膨胀特性。选取滑坡体软岩为研究对象，定量分析了其自由膨胀率、无荷膨胀率和有荷膨胀率，并具体测定了其膨胀力，探讨了其膨胀率和膨胀力的变化规律，揭示了研究区软岩的膨胀特性，为公路建设中软岩边坡加固参数的选取提供了科学的依据。     

谏壁发电厂10号炉电除尘器改造

分析了谏壁发电厂10号炉原电除尘器除尘效率低的原因，介绍了该电除尘器的改造方案及依据。除尘器改造后烟尘排放质量浓度仅为41．5mg／m^3，大大削减了电厂烟尘排放量，增强了企业的发展后劲。     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

Delineation of potential ground water-bearing zones in the Barind tract of West Bengal,India

The Barind tract of West Bengal is an area of tropical sub-humid region composed of old alluvial soil. The area has high water demand due to growing population pressure and intensification in agricultural activity. These create huge stress on surface and ground water availability. Continuous withdrawal of ground water has become an alternative source of irrigation water which has also again made the condition critical. Ground water level has been lowered down drastically in many parts in this region. Under this circumstance, it is necessary to delineate potential ground water-bearing layers. Therefore, the present study attempts to identify potential ground water-bearing zones to manage ground water effectively. Instead of usually used parameters for ground water potentiality delineation here only some particular litholog parameters like breadth of water-bearing layer, depth of water-bearing layer, presence of clay layer above or below major water-bearing layer have been considered for delimiting the same. The result shows that out of total area, 60% area (405,382.2 ha) falls under very low to low potential ground water-bearing zone and only 8.19% area (55,634.97 ha) is potential. Considering this spatial pattern of ground water availability, harvesting structure and magnitude of water withdrawing should be designed.     

氢安全研究现状及面临的挑战

氢能具有储运便捷、来源多样、洁净环保等突出优点,许多国家把发展氢能作为重要的能源战略。氢安全是氢能大规模商业化应用的重要保障。在分析国内外氢安全领域近年来最新研究进展的基础上,依次从氢泄漏与扩散、氢燃烧与爆炸、氢与金属材料相容性及氢风险评价等方面,系统总结了国内外氢安全研究面临的挑战,并对我国氢安全的发展提出了建议。     

Lead and cadmium exposure network in children in a periurban area in India: susceptibility and health risk

Environmental Science and Pollution Research - To investigate the complex Pb-Cd exposure network in school-going children, a thorough investigation of the probable exposure means (diet, water, and...