Simultaneous nitrification and denitrification in a PCL-supported constructed wetland with limited aeration

Environmental Science and Pollution Research - Considerable advances have been made in the substrate design and operation strategies of constructed wetlands to facilitate nitrogen elimination....     

Shaping effects of rice,wheat, maize,and soybean seedlings on their rhizosphere microbial community

The rhizosphere microbiome plays critical roles in plant growth and is an important interface for resource exchange between plants and the soil environment. Crops at various growing stages, especially the seedling stage, have strong shaping effects on the rhizosphere microbial community, and such community reconstruction will positively feed back to the plant growth. In the present study, we analyzed the variations of bacterial and fungal communities in the rhizosphere of four crop species: rice, soybean, maize, and wheat during successive cultivations (three repeats for the seedling stages) using 16S rRNA gene and internal transcribed spacer (ITS) high-throughput sequencing. We found that the relative abundances of specific microorganisms decreased after different cultivation times, e.g., Sphingomonas, Pseudomonas, Rhodanobacter, and Caulobacter, which have been reported as plant-growth beneficial bacteria. The relative abundances of potential plant pathogenic fungi Myrothecium and Ascochyta increased with the successive cultivation times. The co-occurrence network analysis showed that the bacterial and fungal communities under maize were much more stable than those under rice, soybean, and wheat. The present study explored the characteristics of bacteria and fungi in crop seedling rhizosphere and indicated that the characteristics of indigenous soil flora might determine the plant growth status. Further study will focus on the use of the critical microorganisms to control the growth and yield of specific crops.

     

改性HDPE填料的制备及对MBBR脱氮除磷效果的强化

为解决传统填料亲水性差、挂膜速度慢等问题,对高密度聚乙烯(HDPE)填料进行亲水改性并改善填料的挂膜性能及在移动床生物膜反应器(MBBR)中的应用效果,用浸涂的方式将纳米SiO₂、聚乙烯醇(PVA)、聚多巴胺(PDA)等材料涂覆在HDPE填料表面,对改性后填料进行接触角、SEM、FT-IR和XPS表征以及MBBR挂膜启动实验,研究化学需氧量(COD)、氨氮(NH₃-N)、总氮(TN)、总磷(TP)的去除效果以及对填料挂膜时间、生物膜量、蛋白质和多糖含量的影响。结果表明：改性后,填料接触角由94.82°降至 60.1°,填料亲水性明显增强;填料表面出现褶皱,粗糙度增加;上述材料成功负载在填料表面并引入了亲水基团且未改变填料基本结构;填料挂膜时间由25 d提前至16 d,挂膜时间提前了9 d,COD、NH₃-N、TN、TP去除率分别达到94.9%、95.4%、83.5%、71.6%,与改性前比分别提高了9.3%、6.7%、13.7%、11.5%;填料的生物膜量是改性前的1.57倍,从27.35 mg·g⁻¹提高到42.87 mg·g⁻¹,其中蛋白质和多糖的含量分别从改性前的6.48 mg·g⁻¹和3.38 mg·g⁻¹提高到8.83 mg·g⁻¹和5.82 mg·g⁻¹,分别为改性前的1.36倍和1.72倍。由此可以看出,表面涂覆可以提高HDPE填料的亲水性,改性后的HDPE填料可以缩短在MBBR中的挂膜时间及强化对COD、NH₃-N、TN、TP的去除效果。本研究结果可为HDPE填料亲水改性的深入研究及在MBBR中的实际应用提供参考。     

Construction and application of comprehensive drought monitoring model considering the influence of terrain factors: a case study of southwest Yunnan,China

Environmental Science and Pollution Research - Droughts in winter and spring are one of the most prominent natural disasters in the Yunnan Province in China. They occur frequently, with long...     

Solid phase extraction with pyrenebutyric acid-bonded silica for analysis of polychlorinated biphenyls in sewage water by gas chromatography-mass spectrometry

A solid phase extraction (SPE) method using pyrenebutyric acid-bonded silica (PYB) as sorbent was developed to determine 23 polychlorinated biphenyls (PCBs) in sewage water by gas chromatography-mass spectrometry (GC-MS). Factors were optimized in SPE procedures including elution solvent, pH, and cartridge burden. The recoveries of 23 PCB congeners were 69.44-111.91% under optimized conditions. Comparisons were also conducted among PYB-SPE, C(18)-SPE and United States Environmental Protection Agency 608 (USEPA608) methods in the analysis of PCBs in sewage water samples. The results showed that the performance of PYB-SPE method was similar with USEPA608 method and better than C(18)-SPE method. Both PYB-SPE and USEPA608 methods were then employed to analyze PCBs in real spiked sewage water samples. The recoveries of PCB congeners determined by PYB-SPE method ranged from 70.6% to 92.4% in real spiked sewage water samples which were identified to be in accordance with USEPA608 method. Limits of detection (LOD) were in the range of 0.06-0.22ngL(-1) for PCB congeners. The optimized PYB-SPE method was successfully applied to the determination of PCBs in sewage water samples.     

沸石-茭白复合床技术脱氮中试研究

通过模拟农村暴雨径流水质 ,开展了沸石 茭白复合床技术处理农村暴雨径流的中试研究 ,分析了在不同工况下床体中各态氮的变化规律 ,结果表明 ,该项技术应用于暴雨径流氮的控制是可行的。     

钢铁企业节水评价指标体系的构建

针对中国钢铁行业尚未建立节水评价指标体系的现状,在广泛查阅资料的基础上,遵循科学合理性、目标导向性、实用性和可比性的原则,构建了钢铁企业节水评价指标体系。指标体系的建立使钢铁企业的节水成效具有横向和纵向可比性,有利于调动企业的节水积极性,促进节水技术的发展和推广,为钢铁企业开展节水工作指明目标和方向。     

微波耦合氯化铁调理对活性污泥脱水性能及热值的影响

为实现活性污泥高效脱水和资源化利用,研究了微波耦合氯化铁调理活性污泥。主要考察微波耦合氯化铁对活性污泥脱水性能和热值的影响。微波辐射能够改善活性污泥的脱水性能,优化参数为功率700 W、时间100 s。微波耦合氯化铁调理进一步增强了活性污泥的脱水性能,先投加氯化铁后微波辐射的调理（氯化铁+微波）效果优于先微波辐射后投加氯化铁的调理（微波+氯化铁）效果,脱水效果的改善得益于活性污泥絮体的增大以及EPS的减少。微波调理后的活性污泥（干基）热值随着微波辐射时间的增长逐渐降低,而微波耦合氯化铁调理后的活性污泥（干基）热值随着氯化铁投加量的增加先增加后减少。     

采用Design-Expert分析多因素对电路板湿法拆解的影响与优化设计

废旧印刷电路板元器件拆解技术的研究是电子废弃物有效利用的重点环节。通过采用Design-Expert 8.0.6软件,对拆解过程中氟硼酸浓度,双氧水浓度和时间对铅、锡焊料的溶出率的影响趋势进行研究,得出最终优化实验方案为在双氧水浓度为0.5 mol·L-1、氟硼酸浓度为2.5 mol·L-1、反应时间为35 min的条件下铅、锡的溶出率分别为90.66%和99.91%,可视为铅、锡完全溶解并实现脱焊。该方法实现了电子元器件与印刷电路板的快速分离,将为电子废弃物的资源化提供理论支持和应用支撑。