Adsorption behavior of light green anionic dye using cationic surfactant-modified wheat straw in batch and column mode

An agricultural by-product, natural wheat straw (NWS), was soaked in 1 % cationic surfactant (hexadecylpyridinium bromide, CPB) solution for 24 h (at 293 K), and modified wheat straw (MWS) was obtained. Analysis of FTIR, XFR, and nitrogen element showed that CPB was adsorbed onto surface of NWS. Then, MWS was used as adsorbent for the removal of light green dye (LG, anionic dye) from aqueous solution. The experiment was performed in batch and column mode at room temperature (293 K). Sodium chloride (up to 0.1 mol/L) existed in solution was not favor of LG dye adsorption. The equilibrium data were better described by Langmuir isotherm, and adsorption capacity of q _m from Langmuir model was 70.01?±?3.39 mg/g. In fixed-bed column adsorption mode, the effects of initial LG concentration (30, 50, 70 mg/L) and flow rate (6.5, 9.0, 14.5 mL/min) on adsorption were presented. Thomas and modified dose–response models were used to predict the breakthrough curves using nonlinear analysis method, and both models can fit the breakthrough curves. Theoretical and experimental breakthrough curves were drawn and compared. The results implied that MWS can be used as adsorbent material to remove LG from aqueous solution.     

Phosphine in paddy fields and the effects of environmental factors

Ambient levels of phosphine (PH₃) in the air, phosphine emission fluxes from paddy fields and rice plants, and the distribution of matrix-bound phosphine (MBP) in paddy soils were investigated throughout the growing stages of rice. The relationships between MBP and environmental factors were analyzed to identify the principal factors determining the distribution of MBP. The phosphine ambient levels ranged from 2.368 ± 0.6060 ng m⁻³ to 24.83 ± 6.529 ng m⁻³ and averaged 14.25 ± 4.547 ng m⁻³. The highest phosphine emission flux was 22.54 ± 3.897 ng (m² h)⁻¹, the lowest flux was 7.64 ± 4.83 ng (m² h)⁻¹, and the average flux was 14.17 ± 4.977 ng (m² h)⁻¹. Rice plants transport a significant portion of the phosphine emitted from the paddy fields. The highest contribution rate of rice plants to the phosphine emission fluxes reached 73.73% and the average contribution was 43.00%. The average MBP content of 111.6 ng kg⁻¹fluctuated significantly in different stages of rice growth and initially increased then decreased with increasing depth. The peak MBP content in each growth stage occurred approximately 10 cm under the surface of paddy soils. Pearson correlation analyses and stepwise multiple regression analysis showed that soil temperature (Ts), acid phosphatase (ACP) and total phosphorus (TP) were the principal environmental factors, with correlative rankings of Ts > ACP > TP.     

Effect of chlorination and ultraviolet disinfection on tetA-mediated tetracycline resistance of Escherichia coli

Antibiotic-resistant bacteria are an emerging threat to public health during drinking water consumption and reclaimed water reuse. Several studies have shown that the proportions of antibiotic-resistant bacteria in waters may increase when exposed to low doses of UV light or chlorine. In this study, inactivation of tetracycline-resistant Escherichia coli and antibiotic-sensitive E. coli by UV disinfection and chlorination was compared to determine the tolerance of tetracycline-resistant E. coli to UV light and chlorine, and tetracycline resistance of a tetracycline-resistant E. coli population was studied under different doses of the disinfectants. Our results showed that relative to antibiotic-sensitive E. coli, tetracycline-resistant E. coli had the same tolerance to UV light and a potentially higher tolerance to chlorination. The mortality frequency distributions of tetracycline-resistant E. coli exposed to tetracycline were shifted by both chlorination and UV disinfection. When compared to the hemi-inhibitory concentrations (IC₅₀) of tetracycline-resistant E. coli with no exposure to UV or chlorination, the IC₅₀ of tetracycline-resistant E. coli treated with tetracycline was 40% lower when inactivation by UV light or chlorination reached 3-log but was 1.18 times greater when inactivation by chlorination reached 4.3-log. Chlorination applied to drinking water or reclaimed water treatment may increase the risk of selection for highly tetracycline-resistant E. coli.     

超临界水氧化处理煤气化废水的响应面优化

采用响应面法对超临界水氧化处理煤气化废水的工艺参数进行了优化.运用中心复合设计,建立了COD、NH3-N去除率与温度、压强、氧化系数、反应时间4因素的二次回归模型,分析了各因素的显著性及交互作用.结果表明,各因素对COD、NH3-N去除率影响大小为:温度＞氧化系数＞反应时间＞压强.温度和氧化系数对COD去除率交互影响显著;温度和氧化系数、温度和反应时间、氧化系数和反应时间对NH3-N去除率交互影响显著.以COD、NH3-N去除率最大化,温度最低为目标条件,获得试验范围内最佳工艺条件:温度520℃,压强27.00 MPa,氧化系数3.0,反应时间10 min.该条件下3次验证试验的COD、NH3-N平均去除率分别为99.92％、99.54％,与预测值99.89％、99.51％无显著差异,表明所建模型切实可行.     

基于环境与经济发展协调度评价的生态镇建设探讨——以徐州市大沙河镇为例

随着人地关系的矛盾越来越突出,处理好经济发展与环境保护的关系,将两者高度融合,做到环境与经济的持续协调发展逐渐受到各方重视.以徐州市大沙河镇为例,在区域环境与经济发展协调度评价的基础上探索生态镇的建设模式.结果表明,2010年大沙河镇的环境综合发展指数为1.584,经济综合发展指数为1.182,环境与经济发展的协调度为0.88,处于良好协调状态.最后在评价结果的基础上分析了大沙河生态镇建设的模式.     

基于核心企业视角的虚拟生态工业园构建分析

虚拟生态工业园(VEIP)是一种基于循环经济的新型的大循环生态工业组织形式,是对实体生态工业园的补充和扩展.而核心企业作为VEIP的组建者,是整个园区日常运营的信息指挥中枢,对VEIP的成功运营至关重要.分析了核心企业的内涵和应具备的特质,然后从核心企业的视角出发,给出了核心企业构建VEIP的一般流程,并阐述了核心企业在VEIP构建过程中的主要职能.     

基于BP人工神经网络的城市PM2.5浓度空间预测

针对PM2.5日均质量浓度,采用BP人工神经网络模型,预测研究区空气中PM2.5浓度的空间变异,通过与普通克里格(Ordinary Kriging)插值方法对比验证BP人工神经网络预测模型的精度.结果表明:BP人工神经网络预测模型下研究区检验样本点位置的PM2.5仿真浓度与观测浓度之间的均方差、平均绝对误差、平均相对偏差和相关系数分别为0.296 μg2/m6、0.412 μg/m3、1.650％和0.851;而与此同时,普通克里格插值方法下的对应结果分别为1.041 μg2/m6、0.689 μg/m3、11.910％、0.638.研究成果在肯定BP人工神经网络预测模型可用于揭示PM2.5浓度空间变异特征的同时,也证实了其相对于普通克里格插值方法在固定空间点位准确预测PM2.5浓度方面的优势.     

有机污染胁迫对人工湿地中浮萍抗氧化系统的影响

湿地植物在处理高负荷有机废水时会受到不同程度的氧化胁迫。本研究基于对浮萍的有机污染胁迫模拟系统,通过对浮萍脂质过氧化和抗氧化防御系统的监测与分析,研究了浮萍对有机污染胁迫的耐受能力及胁迫去除后浮萍的恢复规律。结果表明,浮萍对有机污染胁迫具有较高的耐受性,在胁迫去除后,具有一定的恢复能力。在COD小于400mg/L时,浮萍并未受到氧化胁迫;当COD达到800 mg/L时,浮萍体内ROS含量上升,细胞膜脂过氧化加剧,但抗氧化酶活性升高,抗氧化物质含量增加,浮萍可保持生长,胁迫去除后,抗氧化防御系统可恢复到对照水平;当COD过高（≥1 000mg/L）,ROS急剧上升,抗氧化防御系统遭受破坏,造成不可逆伤害,胁迫去除后不能恢复正常生长。     

金属负载型催化剂对烟气脱硫性能的影响

介绍了国内外烟气脱硫催化剂的研究现状,研究了金属氧化物负载型催化剂对烟气脱硫性能的影响。以活性炭(AC)为载体,选用8种不同的金属硝酸盐作为浸渍液,采用等体积浸渍法制备金属氧化物负载型催化剂。以脱硫效果较好的Fe2O3/AC为例,研究了不同焙烧温度、金属负载量以及焙烧时间对催化剂脱硫性能的影响。实验结果表明,Fe2O3/AC催化剂脱硫率随着金属负载量的增加呈递增趋势,最优金属负载量为10.0%(质量分数);脱硫率随着焙烧温度的增加显著提高,最优焙烧温度为350℃;脱硫率随着焙烧时间的增加而提高,最优焙烧时间为3.0h。     

畜禽沼液中抗生素和激素的微波处理

通过间歇处理和连续处理实验,探讨微波技术对沼液中四环素类抗生素和激素喹乙醇去除的效果。结果表明,沼液在微波间歇处理中,最优反应时间为40min。此条件下沼液中喹乙醇、土霉素、四环素和金霉素的去除率分别达到26％、49％、48％和70％;微波可显著提高可生化性,BOD5／COD值达到0．37。微波一好氧处理系统中COD与氨氮的去除率分别达到91％和93％,明显优于单独好氧处理。沼液微波连续处理中,最优HRT为90min,此时喹乙醇、土霉素、四环素和金霉素的去除率分别达到24％、45％、50％和74％;BOD5／COD值达到0．34。微波．好氧处理系统中COD与氨氮的去除率均为90％,优于单独好氧处理效果。