Manganese concentrations in maternal–infant blood and birth weight

Manganese (Mn) is an essential mineral nutrient in mammals. The physiological role of Mn in animal models is well documented, but little is known about the adverse effects of Mn deficiency or overexposure in humans, including pregnancy outcomes such as birth weight. We examined the relationship of the maternal and cord blood Mn levels with birth weight in a cohort of 172 mother–infant pairs born in Shanghai, China. Non-linear spline and quadratic regression models were used to test the hypothesis of an inverted U-shaped association between the Mn levels and birth weight. The median (range) levels of Mn in the maternal and cord blood were 5.38 (2.34–30.37) μg/dL and 7.66 (2.57–34.23) μg/dL, respectively. An inverted U-shaped relationship was observed between maternal Mn and birth weight after adjusting for potential confounders. The birth weight increased with Mn levels up to 4.18 μg/dL, and a slight reduction in weight was observed at higher levels. The cord blood Mn levels were not found to be associated with birth weight. Both lower and higher Mn exposures are associated with lower birth weight, which may influence important developmental parameters; the association of higher Mn levels with lower weight was weak and imprecise.     

Stability of 6:2 fluorotelomer sulfonate in advanced oxidation processes: degradation kinetics and pathway

Perfluorooctane sulfonate (PFOS), a widely used mist suppressant in hard chrome electroplating industry, has been listed in the Stockholm Convention for global ban. 6:2 Fluorotelomer sulfonate (6:2 FTS) acid and salts have been adopted as alternative products in the market, but no data about their abiotic degradation has been reported. In the present study, the degradability of 6:2 FTS potassium salt (6:2 FTS-K) was evaluated under various advanced oxidation processes, including ultraviolet (UV) irradiation, UV with hydrogen peroxide (H₂O₂), alkaline ozonation (O₃, pH = 11), peroxone (O₃/H₂O₂), and Fenton reagent oxidation (Fe²⁺/H₂O₂). UV/H₂O₂ was found to be the most effective approach, where the degradation of 6:2 FTS-K followed the pseudo-first-order kinetics. The intermediates were mainly shorter chain perfluoroalkyl carboxylic acid (C₇ to C₂), while sulfate (SO₄ ^2?) and fluoride (F^?) were found to be the final products. The high yields of SO₄ ^2? and F^? indicate that 6:2 FTS-K can be nearly completely desulfonated and defluorinated under UV/H₂O₂ condition. The degradation should firstly begin with the substitution of hydrogen atom by hydroxyl radicals, followed by desulfonation, carboxylation, and sequential “flake off” of CF₂ unit. Compared with PFOS which is inert in most advanced oxidation processes, 6:2 FTS-K is more degradable as the alternative.     

A comparison of statistical methods for deriving freshwater quality criteria for the protection of aquatic organisms

Species sensitivity distributions (SSDs) are increasingly used in both ecological risk assessment and derivation of water quality criteria. However, there has been debate about the choice of an appropriate approach for derivation of water quality criteria based on SSDs because the various methods can generate different values. The objective of this study was to compare the differences among various methods. Data sets of acute toxicities of 12 substances to aquatic organisms, representing a range of classes with different modes of action, were studied. Nine typical statistical approaches, including parametric and nonparametric methods, were used to construct SSDs for 12 chemicals. Water quality criteria, expressed as hazardous concentration for 5 % of species (HC₅), were derived by use of several approaches. All approaches produced comparable results, and the data generated by the different approaches were significantly correlated. Variability among estimates of HC₅ of all inclusive species decreased with increasing sample size, and variability was similar among the statistical methods applied. Of the statistical methods selected, the bootstrap method represented the best-fitting model for all chemicals, while log-triangle and Weibull were the best models among the parametric methods evaluated. The bootstrap method was the primary choice to derive water quality criteria when data points are sufficient (more than 20). If the available data are few, all other methods should be constructed, and that which best describes the distribution of the data was selected.     

Direct N2O decomposition over La2NiO4-based perovskite-type oxides

Direct decomposition of N₂O by perovskite-structure catalysts including La₂NiO₄, LaSrNiO₄, and La_0.7Ce_0.3SrNiO₄ was investigated. The catalysts were prepared by the Pechini method and characterized by x-ray diffraction (XRD), BET, scanning electron microscopy (SEM), and O₂-TPD. Experimental results indicate that the properties of La₂NiO₄ are significantly improved by partially substituting La with Sr and Ce. N₂O decomposition efficiencies achieved with LaSrNiO₄ and La_0.7Ce_0.3SrNiO₄ are 44 and 36%, respectively, at 400ºC. As the temperature was increased to 600ºC, N₂O decomposition efficiency achieved with LaSrNiO₄ and La_0.7Ce_0.3SrNiO₄ reached 100% at an inlet N₂O concentration of 1,000 ppm, while the space velocity was fixed at 8,000 hr^?1. In addition, effects of various parameters including oxygen, water vapor, and space velocity were also explored. The results indicate that N₂O decomposition efficiencies achieved with LaSrNiO₄ and La_0.7Ce_0.3SrNiO₄ are not significantly affected as space velocity is increased from 8,000 to 20,000 hr^?1, while La_0.7Ce_0.3SrNiO₄ shows better tolerance for O₂ and H₂O_(g). On the other hand, N₂ yield with LaSrNiO₄ as catalyst can be significantly improved by doping Ce. At a gas hour space velocity of 8,000 hr^?1, and a temperature of 600ºC, high N₂O decomposition efficiency and N₂ yield were maintained throughout the durability test of 60 hr, indicating the long-term stability of La_0.7Ce_0.3SrNiO₄ for N₂O decomposition.

Implications:Nitrous oxide (N₂O) not only has a high global warming potential (GWP₁₀₀ = 310), but also potentially destroys ozone in the stratosphere. Pervoskite-type catalysts including La₂NiO₄, LaSrNiO₄, and La_0.7Ce_0.3SrNiO₄ are applied for direct N₂O decomposition. The results show that N₂O decomposition can be enhanced as Sr and Ce are doped into La₂NiO₄. At 600ºC, N₂O decomposition efficiencies achieved with LaSrNiO₄ and La_0.7Ce_0.3SrNiO₄ reach 100%, demonstrating high activity and good potential for direct N₂O decomposition. Effects of O₂ and H₂O_(g) contents on catalytic activities are also evaluated and discussed.     

膜吸收法净化低浓度甲醛和氨气简

基于膜吸收技术自制双层平板式膜吸收器,搭建净化低浓度甲醛和氨气污染模拟系统,考察不同膜结构参数、进气流量、吸收剂流量等因素对其净化效果的影响。结果表明,聚偏氟乙烯PVDF对低浓度甲醛和氨气的净化效率高于聚四氟乙烯PTFE。对同一材质膜,随着膜孔隙率的增大,甲醛和氨气的净化率呈上升趋势。随着进气流量的增加,甲醛和氨气的净化效率降低;而吸收剂流量对其净化效率影响不大。对于所有实验条件,平均膜孔径为0.22 μm的PVDF 4^#在进气流量u_g=120 L/h时,甲醛和氨气的净化效率最高,分别达94.7%和96.3%。     

阿什河水系枯水期氮污染特征与同位素源解析

在阿什河水系设置20个采样点,采用水质监测技术和稳定氮同位素示踪技术,研究了枯水期阿什河氮污染特征和硝酸盐氮污染来源。结果表明:(1)阿什河枯水期大部分采样点氨氮浓度较低,大部分区域达到或优于《地表水环境质量标准》(GB3838—2002)中Ⅲ类。上游河段硝酸盐氮浓度较低,中游河段较高,到下游河段略有降低。总氮浓度较高,最高达19.4mg/L。(2)阿什河水系采样点15 N的丰度(δ15 N)主要处于0.11%~0.21%、0.42%~0.78%、0.83%~0.88%和1.09%~1.26%。稳定15 N同位素示踪解析阿什河硝酸盐氮污染来源表明,阿什河上游污染源主要为大气沉降、土壤有机氮和人工化肥;中游主要受畜禽养殖污水和生活污水污染;下游主要受城镇生活污水和工业废水影响。     

A2O-MBR工艺处理城市污Z作农业灌溉用水中试研究

为开发一种污水再生利用于农田灌溉领域的新型技术,本实验以城市污水为研究对象,采用A2O—MBR工艺进行中试研究,并将系统出水水质与《农田灌溉水质标准（GB5084—2005）》的主要水质指标进行对比分析。结果表明,系统COD和BOD,出水浓度范围分别为3．2～59．6mg／L、1．0～7．6mg／L,系统出水pH为7．16～7．54,悬浮物浓度几乎为0,上述指标均符合标准;TP、TN和氨氮的出水范围分别为0．03～0．79mg／L、1．6～17．7mg／L和0．8～10．3mg／L。《农田灌溉水质标准》没有对上述3个指标提出具体要求,且少量的氮磷是植物生长的营养元素。该系统出水的主要水质指标符合标准兽求．     

重庆主城区秋冬季逆温对空气质量影响的观测分析

2013年9—11月利用RPG-HATPRO地基多通道微波辐射计对重庆主城区大气进行连续探测,统计了大气逆温情况,并对典型重污染天气下大气逆温与空气质量状况进行综合分析。结果表明,逆温出现的频率为63.3%,基本为接地逆温类型,逆温层厚度为953 m,逆温强度为0.3℃/hm;逆温的存在为气溶胶的积聚和凝聚创造了有利条件。     

基于CA-MAS的水域总有机碳扩散模拟研究

当前水环境污染扩散研究一般基于普通数值模型模拟,忽略了水污染扩散微观驱动力的影响。为能更真实地反映其动态扩散过程,针对水域总有机碳(TOC)扩散机理,基于CA和MAS技术,将影响TOC扩散的自然和社会经济因素抽象为微观的水流Agent、风速Agent、径流量Agent、污水排放口Agent、人工管理Agent以及农业生产地Agent,将研究水域抽象为CA元胞空间,建立了CA-MAS水域总有机碳扩散模型,对水域总有机碳的动态演化过程进行模拟,并以武汉理工大学鉴湖水域作为实验区域,借助NetLogo仿真平台完成了模型的实现与验证。模拟结果表明,该模型基本能够反映水体总有机碳的扩散规律,可以为水环境污染控制提供参考。     

Dioxin-like activity in sediments from Tai Lake, China determined by use of the H4IIE-luc bioassay and quantification of individual AhR agonists

Deterioration of the general ecosystem and specifically quality of the water in Tai Lake (Ch: Taihu), the third largest freshwater in China, is of great concern. However, knowledge on status and trends of dioxin-like compounds in Tai Lake was limited. This study investigated AhR-mediated potency and quantified potential aryl hydrocarbon receptor (AhR) agonists in sediments from four regions (Meiliang Bay, Zhushan Lake, Lake Center, Corner of Zhushan Lake, and Meiliang Bay) of Tai Lake by use of the in vitro H4IIE-luc, cell-based, transactivation, reporter gene assay, and instrumental analysis. Concentrations of 2,3,7,8-tetrachlorodibenzo-p-dioxin equivalents (Bio-TEQs) in sediments ranged from less than the limit of detection to 114.5 pg/g, dry weight, which indicated that organic extracts of sediments exhibited significant AhR-mediated potencies. Results of the potency balance analysis demonstrated that acid-labile, dioxin-like compounds represented a greater proportion of concentrations of Bio-TEQs in sediments from Tai Lake. Concentrations of 2,3,7,8-tetrachlorodibenzo-p-dioxin equivalents calculated as the sum of the product of concentrations of individual congeners and their respective relative potencies (Chem-TEQs) based on polycyclic aromatic hydrocarbons and/or polychlorinated biphenyls represented no more than 10 % of the total concentrations of Bio-TEQs.