Distribution of nuclear bomb Pu in Nishiyama area, Nagasaki, estimated by accurate and precise determination of 240Pu/239Pu ratio in soils

Plutonium isotopes in forest soils collected in Nishiyama area, Nagasaki, were successfully determined by high resolution inductively coupled plasma mass spectrometry after the treatment with a microwave decomposition system. The (240)Pu/(239)Pu atom ratios observed in the samples in the Nishiyama area were obviously lower than the range of the global fallout. The low ratios (minimum 0.032) observed in Nishiyama area indicated the influence of detonation of the Pu nuclear weapon in 1945. Since the area is contaminated also by global fallout, the (240)Pu/(239)Pu atom ratio can be more sensitive indicator of bomb-derived Pu than Pu activity concentration.     

The transfer of 239/240Pu to cow milk

In summer 1993 we measured the transfer of (239/240)Pu to milk from herbage from a pasture located 5 km from the Chernobyl nuclear power plant. In one treatment cows were allowed to graze freely on the pasture. In a second treatment, cows were fed herbage collected from the pasture in stalls. The milk transfer coefficient; F(m) did not vary significantly between treatments and the mean value of 7.5x10(-6)d l(-1) was higher than previously reported values. Despite many values of F(m) for Pu in the literature we identified few relevant original data sets. Transfer coefficient values for Pu are only appropriate when used in conjunction with a specified time period or an appropriate model which allows for the biological half-life. We recommend for screening purposes an F(m) value of 1x10(-5)d l(-1) for Pu, with an order of magnitude lower value being appropriate for cows which are only exposed for one grazing season.     

张鸿翼中国地震现场考察的先行者

张鸿翼,字君翔,云南保山县人, 生卒年不详。张鸿翼天资聪明,17岁时应县、府院试均获第一。1904年考入北京京师大学堂,毕业授内阁中书,后不久离京回滇。民国初,历任云南省教育总会会长、云南孔教会附设国学社讲习长、省立甲种农业学校校长、省督军公署秘书、云南农业中学校长、云南高等学校校长、教育研究会博物系主任。 1922年4月赴美国芝加哥、纽约、华盛顿等地考察,后入加州大学公费留学。回国后,历任省公署顾问、代理交通厅长、     

Two-step harmless treatment of secondary aluminum dross (SAD) by vacuum distillation and alkaline roasting

Journal of Material Cycles and Waste Management - Secondary aluminum dross (SAD) is classified as hazardous waste by many countries in the world because it contains a large number of toxic and...     

Zinc removal from synthetic waters using magnetite/graphene oxide composites

The removal of heavy metals from wastewater has become a global challenge, which demands the continuous study of efficient and low-cost treatment alternatives such as adsorption. In this research, the removal of zinc was evaluated using batch adsorption processes with nonconventional materials such as graphene oxide (GO), magnetite (MG), and their composites (GO:MG), formulated with three weight ratios (2:1, 1:1, and 1:2). Graphene was synthesized by the modified Marcano method, using pencil lead graphite as a precursor. MG and the composites were synthesized by chemical coprecipitation of ferrous sulfate and ferric chloride. The materials were characterized by Raman and Fourier transform infrared spectroscopies, scanning electron microscopy, X-ray diffraction, and the Brunauer–Emmett–Teller method to determine the functional groups, microstructural and morphological characteristics, and specific surface area. Batch adsorption tests were carried out to optimize the adsorbent dose and contact time with zinc solutions of 10 ppm. Zinc adsorption reached equilibrium at 2 h, with an optimal dose between 0.25 and 1.0 g/L. The maximum zinc removal efficiencies/adsorption capacities were 98.6%/165.6, 83.4%/47.6, 83.5%/21.9, 72.8%/19.9, and 82.2%/9.25 mg/g using GO, 2GO:1MG, 1GO:1MG, 1GO:2MG, and MG, respectively. Furthermore, the analysis of the isotherm and adsorption kinetics models determined that the adsorption processes using MG and the composites fit the Sips and pseudo-second-order models.     

Microfiber pollution: an ongoing major environmental issue related to the sustainable development of textile and clothing industry

Environment, Development and Sustainability - Textiles release microfibers to the environment during production, use, and at end-of-life disposal. There is a potentially large and growing risk to...     

Compartmentation and effects of lead (Pb) in the collembolan,Folsomia candida

Environmental Science and Pollution Research - The impact of soil lead (Pb) pollution on survival, growth, and reproduction of the collembolan, Folsomia candida, and Pb compartmentation in its gut...     

Carbonization of waste PVC to develop porous carbon material without further activation

Efficient removal of chlorine from PVC achieved by two-stage heat-treatment (280 and 410 degrees C) provided chlorine-free isotropic pitch containing additive. The pitch was stabilized and carbonized into porous carbons with surface areas of approximately 300 m2/g. Resultant porous carbons showed three pore structures of supermicropore, micropore and mesopore. The generation of CO2 from the decomposition of the CaCO3 additive in waste PVC is responsible for the development of porous structures. The surface area of the carbonized product increased after the removal of CaO.     

Modelling Phosphorus Retention in Lakes and Reservoirs

Steady-state models for the prediction of P retention coefficient (R) in lakes were evaluated using data from 93 natural lakes and 119 reservoirs situated in the temperate zone. Most of the already existing models predicted R relatively successfully in lakes while it was seriously under-estimated in reservoirs. A statistical analysis indicated the main causes of differences in R between lakes and reservoirs: (a) distinct relationships between P sedimentation coefficient, depth, and water residence time; (b) existence of significant inflow–outflow P concentration gradients in reservoirs. Two new models of different complexity were developed for estimating R in reservoirs: , where τ is water residence time (year), was derived from the Vollenweider/Larsen and Mercier model by adding a calibrated parameter accounting for spatial P non-homogeneity in the water body, and is applicable for reservoirs but not lakes, and , where [P_in] is volume-weighted P concentration in all inputs to the water body (μg l⁻¹), was obtained by re-calibrating the OECD general equation, and is generally applicable for both lakes and reservoirs. These optimised models yield unbiased estimates over a large range of reservoir types.     

CO2资源化利用的现状及前景

介绍了CO2分离捕集最新工艺——电化学法、膜法、化学循环燃烧法的研究进展。评述分析了CO2的各种资源化应用前景：CO2气体用作生物碳源、辅助注射成型剂及有机物（如氨基甲酸酯、表面活性剂）合成原料等;液态CO2用于人造金刚石、热泵干燥、超临界CO2萃取及固体干冰冷喷射清洗等。CO2作为一种潜在的丰富碳源,应不断研发其新的应用领域,加快其工业化应用。