A synomone imparting distinct sex pheromone communication channels for Choristoneura rosaceana (Harris) and Pandemis limitata (Robinson) (Lepidoptera: Tortricidae)

Summary. Male obliquebanded leafrollers, Choristoneura rosaceana (Harris), were induced to respond to a pheromone source tainted with a behavioural antagonist, Z9-tetradecenyl acetate, when a source releasing the antagonist was placed 10 cm upwind of the tainted source in a wind tunnel. However, placement of the antagonist upwind of an attractive pheromone source did not interrupt pheromone-mediated responses. Placement of a source releasing Z9-tetradecenyl acetate, a minor pheromone component of the sympatric species, the threelined leafroller, Pandemis limitata (Robinson), upwind of a calling P. limitata female, reduced conspecific male pheromone-mediated response but resulted in upwind flight by male C. rosaceana and contact with heterospecific females. Male P. limitata locked on and flew upwind to but did not contact heterospecific females when a source releasing Z9-tetradecenyl acetate was positioned upwind of a calling C. rosaceana female. In the field, adaptation or habituation to Z9-tetradecenyl acetate caused by atmospheric treatment with this compound apparently resulted in reciprocal heterospecific pheromone responses. More C. rosaceana males were captured in traps baited with their pheromone and the behavioural antagonist in small field plots treated atmospherically with Z9-tetradecenyl acetate than in nontreated control plots. Fewer male P. limitata were captured in traps baited with their own pheromone, or with C. rosaceana pheromone tainted with Z9-tetradecenyl acetate in plots treated atmospherically with Z9-tetradecenyl acetate than in nontreated control plots. We argue that Z9-tetradecenyl acetate is an important synomone which assists in partitioning the sexual chemical communication channels of C. rosaceana and P. limitata. Received 9 February 1999; accepted 22 March 1999.     

RECHARGE OF THE SNAKE RWER PLAIN AQUIFER: TRANSITIONING FROM INCIDENTAL TO MANAGED1

ABSTRACT: Declining ground-water levels and spring discharges have heightened water user concerns about the sustainability of the Snake River Plain aquifer in southern Idaho. Diminished recharge from surface water irrigation and increased irrigation pumping have been depleting the aquifer at a rate of about 350,000 acre-feet/year. Previously, aquifer conditions were treated as an uncontrollable consequence of weather and development activities. With increasing competition for available water, the State appears to be progressing through a three-stage process of recharge management. The first stage is that which has occurred historically, where recharge is largely an incidental effect of surface water irrigation. The second stage is the implementation of intentional recharge with little regard to identifying or maximizing benefits. Idaho has been at this stage for the past few years. The State is entering a third stage in which recharge sites will be located and designed to meet specific water user and environmental objectives. Preliminary estimates using numerical and analytical models demonstrate that managed recharge within a few miles of the river will result in short-term increases in spring discharge. More distant recharge sites are needed to provide longer-term benefits. The primary challenge facing implementation of the managed recharge program will be the balancing of economic and environmental costs and benefits and to whom they accrue.     

Establishing and using study criteria to ensure the rigor and robustness of survival compliance testing at hydroelectric dams

An elaborate set of criteria have been developed by fish managers and regulators to assure the accuracy, precision, representativeness, and robustness of survival compliance studies coordinated within the Federal Columbia River Power System in the northwestern USA. Dam passage survival, defined as survival from the dam face to the tailrace mixing zone, must be ≥96 % for spring out migrating juvenile salmonids [i.e., yearling Chinook salmon (Oncorhynchus tshawytscha) and steelhead (O. mykiss)] and ≥93 % for summer outmigrants (i.e., subyearling Chinook salmon). Survival must be estimated with a standard error ≤1.5 %. However, these quantitative benchmarks are only part of a multifaceted set of criteria, including representative dam operations, river discharge levels, and fish selection, along with tests of model validity that must be satisfied. These criteria are illustrated using acoustic-tag survival compliance studies conducted at The Dalles Dam on the Columbia River, 2010–2012. The results suggest evaluation criteria for survival compliance tests must balance the needs for rigor and robustness with the ability to reasonably perform the tests in naturally varying riverine systems.     

Estimating Evapotranspiration for Dryland Cropping Systems in the Semiarid Texas High Plains Using SWAT

The Soil and Water Assessment Tool (SWAT) is one of the most widely used watershed models for simulating hydrology in response to agricultural management practices. However, limited studies have been performed to evaluate the SWAT model's ability to estimate daily and monthly evapotranspiration (ET) in semiarid regions. ET values were simulated using ArcSWAT 2012 for a lysimeter field managed under dryland conditions at the USDA‐ARS Conservation and Production Research Laboratory at Bushland, Texas, and compared with measured lysimeter values from 2000 to 2010. Two scenarios were performed to compare SWAT's performance: (1) use of default plant leaf area index (LAI) values in the embedded plant database and (2) adjusted LAI values. Scenario 1 resulted in an “unsatisfactory” Nash‐Sutcliffe efficiency (NSE) of 0.42 and 0.38 for the calibration and validation periods, respectively. Scenario 2 resulted in a “satisfactory” NSE value for the calibration period while achieving a “good” NSE of 0.70 for the validation period. SWAT generally underestimated ET at both the daily and monthly levels. Overestimation during fallow years may be due to the limitations of the pothole function used to simulate furrow diking. Users should be aware of potential errors associated with using default LAI parameters. Inaccuracies in ET estimation may also stem from errors in the plant stress functions, particularly when evaluating water management practices for dryland watersheds.     

The influence of organic matter on sorption and fate of glyphosate in soil - Comparing different soils and humic substances

Soil organic matter (SOM) is generally believed not to influence the sorption of glyphosate in soil. To get a closer look on the dynamics between glyphosate and SOM, we used three approaches: I. Sorption studies with seven purified soil humic fractions showed that these could sorb glyphosate and that the aromatic content, possibly phenolic groups, seems to aid the sorption. II. Sorption studies with six whole soils and with SOM removed showed that several soil parameters including SOM are responsible for the strong sorption of glyphosate in soils. III. After an 80 day fate experiment, ∼40% of the added glyphosate was associated with the humic and fulvic acid fractions in the sandy soils, while this was the case for only ∼10% of the added glyphosate in the clayey soils. Glyphosate sorbed to humic substances in the natural soils seemed to be easier desorbed than glyphosate sorbed to amorphous Fe/Al-oxides.     

Spatial gradients and source apportionment of volatile organic compounds near roadways

Concentrations of 55 volatile organic compounds (VOCs) (C₂–C₁₂) are reported near a highway in Raleigh, NC. Thirty-minute samples were collected at eight locations, ranging from approximately 10–100 m perpendicular from the roadway. The highest concentrations of VOCs were generally measured closest to the roadway, and concentrations decreased exponentially with increasing distance from the roadway. The highest mean concentration for individual VOCs were for ethylene (3.10 ppbv) (mean concentration at x = 13 m), propane (2.27 ppbv), ethane (1.91 ppbv), isopentane (1.54 ppbv), toluene (0.95 ppbv), and n-butane (0.89 ppbv). Concentrations at the nearest roadway location (x = 13 m) were generally between 2.0 and 1.5 times those from the farthest roadway location (x = 92 m). The data were apportioned into four source categories using the EPA Chemical Mass Balance Model (CMB8.2): motor vehicle exhaust, compressed natural gas, propane gas, and evaporative gasoline. The majority of the VOCs resulted from motor vehicle exhaust (67 ± 12%) (% of total VOC at x = 13 m ± S.D.). Compressed natural gas, propane gas, and evaporative gasoline accounted for approximately 15%, 7% and 1% of the total VOC emissions, respectively, at x = 13 m.     

Development and validation of the volatile correction model for PM10 – An empirical method for adjusting TEOM measurements for their loss of volatile particulate matter

EU Directives stipulate that PM₁₀ should be measured using the gravimetric reference method as laid out in EN12341 [CEN, 1998. Air Quality – Determination of the PM₁₀ Fraction of Suspended Particulate Matter – Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods. European Committee for Standardisation], or an equivalent method as demonstrated using EC guidance [EC, 2005. Demonstration of Equivalence of Ambient Air Monitoring Methods. European Commission Working Group on Guidance for the Demonstration of Equivalence]. There is however a conflict between the requirement to measure PM₁₀ using the gravimetric reference method and the need for rapid public reporting, and many member states, including the UK, rely on non-gravimetric techniques to measure PM₁₀. In the UK the majority of PM₁₀ measurements are made using the Tapered Element Oscillating Microbalance (TEOM), which does not meet the equivalence criteria [Harrison, D., 2006. UK Equivalence Programme for Monitoring of Particulate Matter. Defra, London]. The implied need to upgrade or replace TEOMs with an equivalent automated measurement technique has significant cost implications. The model described in this paper was based on analysis of daily mean measurements of PM₁₀ by the Filter Dynamics Measurement System (FDMS) and the TEOM at UK sites. It uses the FDMS measurement of the volatile component of PM₁₀ (referred to here as FDMS purge) to correct for differences in the sensitivity to volatile PM₁₀ between the TEOM and the EU gravimetric reference method. The model equation for the correction of TEOM PM₁₀ measurements is: TEOM_VCM = TEOM ? 1.87 FDMS purge due to the regional homogeneity of volatile PM, the FDMS purge concentration may be measured at a site distant to the TEOM, allowing the possibility of using a single FDMS instrument to correct PM₁₀ measurements made by several TEOMs in a defined geographical area. The model was assessed against the criteria for the EC Working Group's Guidance for the Demonstration of Equivalence of Ambient Air Monitoring Methods [EC, 2005. Demonstration of Equivalence of Ambient Air Monitoring Methods. European Commission Working Group on Guidance for the Demonstration of Equivalence]. The model satisfies the equivalence criteria using remote FDMS purge measurements for distances up to 200 km (in 22 out of 23 data sets). These data provide strong evidence that the model is a viable tool for correcting measurements from TEOM instruments on the national and local government networks.     

Assessing the chemical and biological accessibility of the herbicide isoproturon in soil amended with biochar

Decamethylcyclopentasiloxane (D5) is a cyclic volatile methyl siloxane (cVMS) commonly found in commercially available products. D5 is expected to enter the terrestrial environment through the deposit of biosolids from sewage treatment plants onto agricultural fields for nutrient enrichment. Little to no information currently exists as to the risks of D5 to the terrestrial environment. In order to evaluate the potential risk to terrestrial organisms, the toxicity of a D5 contaminated biosolid in an agricultural soil was assessed with a battery of standardized soil toxicity tests.D5 was spiked into a surrogate biosolid and then mixed with a sandy loam soil to create test concentrations ranging from 0 to 4074 mg kg⁻¹. Plant (Hordeum vulgare (barley) and Trifolium pratense (red clover)) and soil invertebrates (Eisenia andrei (earthworm) and Folsomia candida (springtail)) toxicity tests were completed to assess for lethal and sub-lethal effects. Plant testing evaluated the effects on seedling emergence, shoot and root length, and shoot and root dry mass. Invertebrate test endpoints included adult lethality, juvenile production, and individual juvenile dry mass (earthworms only). Soil samples were collected over time to confirm test concentrations and evaluate the loss of chemical over the duration of a test. The toxicity of the D5 was species and endpoint dependent, such that no significant adverse effects were observed for T. pratense or E. andrei test endpoints, however, toxicity was observed for H. vulgare plant growth and F. candida survival and reproduction. Chemical losses of up to 50% were observed throughout the tests, most significantly at high concentrations.     

Accumulation of metals,trace elements and semi-volatile organic compounds on exterior window surfaces in Baltimore

Organic films have been found to develop on window surfaces [Diamond et al., Environmental Science and Technology 34 (2000a) 2900]. The film contains organic compounds that are in dynamic equilibrium with the gas-phase in air, and organic and inorganic compounds and elements associated with deposited air particles. In this study, the exterior surfaces of windows were sampled in downtown and suburban Baltimore, Maryland. Higher concentrations of PCBs, PAH, metals and trace elements were found at downtown than a suburban site. PCBs in the films at downtown sites were dominated by penta and hexa homologue groups and PAH signatures resembled that of vehicle emissions. Twenty-six metals and trace elements were separated into two groups according to their enrichment factors (EF). Ag, Hg, Se, Sb and Zn had EF > 100, suggesting anthropogenic sources of these metals in the films; whereas Fe, Ca, Co, Cr and others had EF <10, suggesting a crustal origin. An unusual profile dominated by deca- and nona- PCBs and relatively higher concentrations of Ag, Hg and Zn may be attributable to emissions from a medical waste incinerator. Dry deposition fluxes of selected metals on windows were 1.4-94 times higher on windows with than without films, indicating that the film increases the dry deposition of particles and their associated chemicals. This implies that film development, which is associated with elevated VOC and SOC emissions to urban air, will increase film development that will, in turn, increase the accumulation of other atmospherically deposited constituents such as metals.