Tolerance of an Albino Fish to Ultraviolet-B Radiation

We exposed albino and pigmented medakaOryzias latipes to simulated solar ultraviolet-B (UVB) radiation to determine if albino medaka were less tolerant of UVB radiation than medaka pigmented with melanin. There was no difference in the number of albino and pigmented medaka that died during the exposure period. Spectrophotometric analyses of the outer dorsal skin layers from albino and pigmented medaka indicated that, prior to exposure, both groups of fish had similar amounts of an apparent colorless non-melanin photoprotective substance that appears to protect other fish species from UVB radiation. Our results indicate that albino medaka were as tolerant of UVB radiation as pigmented medaka because they had similar amounts of this photoprotective substance in the outer layers of the skin.     

Biomechanical pulping: a mill-scale evaluation

Mechanical pulping process is electrical energy intensive and results in low paper strength. Biomechanical pulping, defined as the fungal treatment of lignocellulosic materials prior to mechanical pulping, has shown at least 30% savings in electrical energy consumption, and significant improvements in paper strength properties compared to the control at a laboratory scale. In an effort to scale-up biomechanical pulping to an industrial level, 50 tons of spruce wood chips were inoculated with the best biopulping fungus in a continuous operation and stored in the form of an outdoor chip pile for 2 weeks. The pile was ventilated with conditioned air to maintain the optimum growth temperature and moisture throughout the pile. The control and fungus-treated chips were refined through a thermomechanical pulp mill (TMP) producing lightweight coated paper. The fungal pretreatment saved 33% electrical energy and improved paper strength properties significantly compared to the control. Since biofibers were stronger than the conventional TMP fibers, we were able to reduce the amount of bleached softwood kraft pulp by at least 5% in the final product. Fungal pretreatment reduced brightness, but brightness was restored to the level of bleached control with 60% more hydrogen peroxide. The economics of biomechanical pulping look attractive.     

A review of personal care products in the aquatic environment: environmental concentrations and toxicity

Considerable research has been conducted examining occurrence and effects of human use pharmaceuticals in the aquatic environment; however, relatively little research has been conducted examining personal care products although they are found more often and in higher concentrations than pharmaceuticals. Personal care products are continually released into the aquatic environment and are biologically active and persistent. This article examines the acute and chronic toxicity data available for personal care products and highlights areas of concern. Toxicity and environmental data were synergized to develop a preliminary hazard assessment in which only triclosan and triclocarban presented any hazard. However, numerous PCPs including triclosan, paraben preservatives, and UV filters have evidence suggesting endocrine effects in aquatic organisms and thus need to be investigated and incorporated in definitive risk assessments. Additional data pertaining to environmental concentrations of UV filters and parabens, in vivo toxicity data for parabens, and potential for bioaccumulation of PCPs needs to obtained to develop definitive aquatic risk assessments.     

Effects of bioturbation on the fate of oil in coastal sandy sediments--an in situ experiment

Effects of bioturbation by the common lugworm Arenicola marina on the fate of oil hydrocarbons (alkanes and PAHs) were studied in situ during a simulated oil spill in a shallow coastal area of Roskilde fjord, Denmark. The fate of selected oil compounds was monitored during 120 d using GC-MS and bioturbation activity (feces production and irrigation) was measured regularly during the experiment and used as input parameters in a mechanistic model describing the effects of A. marina on the transport and degradation of oil compounds in the sediment. The chemical analytical data and model results indicated that A. marina had profound and predictable effects on the distribution, degradation and preservation of oil and that the net effect depended on the initial distribution of oil. In sediment with an oil contaminated subsurface-layer A. marina buried the layer deeper in the sediment which clearly enhanced oil persistence. Conversely, A. marina stimulated both the physical removal and microbial degradation of oil compounds in uniformly oil contaminated sediments especially in deeper sediment layers (10-20 cm below the surface), whereas the fate of oil compounds deposited in surface layers (0-5 cm) mainly was affected by removal processes induced by wave actions and other bioturbating infauna such as Nereis diversicolor, Corophium volutator and Hydrobia spp. present in the experimental plots.     

Bioconcentration and depuration of endosulfan sulfate in mosquito fish (Gambusia affinis)

Endosulfan is an insecticide which has been widely used in agriculture. The technical grade material consists of two isomers (alpha and beta). Under natural environmental conditions, endosulfan is metabolized through oxidation and the main metabolite in the environment is endosulfan sulfate. Most ecotoxicology research has been conducted with technical grade endosulfan to determine effects on non-target aquatic organisms. Little data on the effects of endosulfan sulfate on aquatic organisms are available in the literature. This study characterizes endosulfan sulfate bioconcentration and depuration in mosquito fish (Gambusia affinis). During the study, G. affinis was exposed to an environmentally relevant endosulfan sulfate concentration of 0.25 μg L⁻¹ for 5 weeks (uptake phase) followed by a 3-week period (depuration phase) in clean water. This study found that G. affinis bioconcentrated endosulfan sulfate. During the exposure phase, fish tissue concentrations of endosulfan sulfate increased with time up to 730 μg kg⁻¹ dw or 215 μg kg⁻¹ ww. The bioconcentration data followed Michaelis-Menten kinetics better than the one-compartment first order kinetics (1-CFOK). Using these models, the bioconcentration factors for endosulfan sulfate-exposed G. affinis were from 687 to 888  L kg⁻¹ in wet weight or 2263 to 2936 L kg⁻¹ in dry weight. During the depuration phase, endosulfan sulfate concentrations in tissue significantly decreased and the data followed first order kinetics. The half-life of endosulfan sulfate in G. affinis was about 9 d. There was no significant difference in standard length or weight between control and exposed fish. The growth data followed the von Bertalanffy growth model. However, the condition factor of exposed fish increased with time during the exposure phase.     

俄罗斯出口关税调整对中国木材市场的影响

俄罗斯是中国最大的原木进口来源国,俄罗斯政府宣布从2010年1月起将原木出口关税从当前的6.5%增加到80%.本文通过建立中国区域木材市场模型,模拟了俄罗斯原木出口关税提高将对我国各地区的木材市场产生的数量影响.由模型得到的结论是:东北地区将受到的影响最大,森林资源的采伐压力会因为进口关税的大幅度提高而增加;中部地区的采伐量将增加约2%左右;而西部和南部地区的采伐数量几乎不变.从全国范围来看,我国采伐总量将增加3.23%.从地区间的贸易影响来看,中部地区的木材进口会流向东北地区,来弥补东北进口木材数量减少带来的影晌.据此,文章最后提出了相应的政策建议:进口渠道的多元化,保证国内的木材安全;相关政府部门应进一步为中国林业加工企业到俄罗斯投资提供便利和引导,从而进一步明晰产业分工格局;从俄罗斯进来的原木减少,应将大部分板材落地加工,促使地区木材产品结构调整和产业升级,逐渐改变单以加工锯材为主的产品结构.     

Review of unsaturated-zone transport and attenuation of volatile organic compound (VOC) plumes leached from shallow source zones

Reliable prediction of the unsaturated zone transport and attenuation of dissolved-phase VOC (volatile organic compound) plumes leached from shallow source zones is a complex, multi-process, environmental problem. It is an important problem as sources, which include solid-waste landfills, aqueous-phase liquid discharge lagoons and NAPL releases partially penetrating the unsaturated zone, may persist for decades. Natural attenuation processes operating in the unsaturated zone that, uniquely for VOCs includes volatilisation, may, however, serve to protect underlying groundwater and potentially reduce the need for expensive remedial actions. Review of the literature indicates that only a few studies have focused upon the overall leached VOC source and plume scenario as a whole. These are mostly modelling studies that often involve high strength, non-aqueous phase liquid (NAPL) sources for which density-induced and diffusive vapour transport is significant. Occasional dissolved-phase aromatic hydrocarbon controlled infiltration field studies also exist. Despite this lack of focus on the overall problem, a wide range of process-based unsaturated zone - VOC research has been conducted that may be collated to build good conceptual model understanding of the scenario, particularly for the much studied aromatic hydrocarbons and chlorinated aliphatic hydrocarbons (CAHs). In general, the former group is likely to be attenuated in the unsaturated zone due to their ready aerobic biodegradation, albeit with rate variability across the literature, whereas the fate of the latter is far less likely to be dominated by a single mechanism and dependent upon the relative importance of the various attenuation processes within individual site - VOC scenarios. Analytical and numerical modelling tools permit effective process representation of the whole scenario, albeit with potential for inclusion of additional processes - e.g., multi-mechanistic sorption phase partitioning, and provide good opportunity for further sensitivity analysis and development to practitioner use. There remains a significant need to obtain intermediate laboratory-scale and particularly field-scale (actual site and controlled release) datasets that address the scenario as a whole and permit validation of the available models. Integrated assessment of the range of simultaneous processes that combine to influence leached plume generation, transport and attenuation in the unsaturated zone is required. Component process research needs are required across the problem scenario and include: the simultaneous volatilisation and dissolution of source zones; development of appropriate field-scale dispersion estimates for the unsaturated zone; assessment of transient VOC exchanges between aqueous, vapour and sorbed phases and their influence upon plume attenuation; development of improved field methods to recognise and quantify biodegradation of CAHs; establishment of the influence of co-contaminants; and, finally, translation of research findings into more robust practitioner practice.     

The OECD validation program of the H295R steroidogenesis assay: Phase 3. Final inter-laboratory validation study

Background, goals, and scope

In response to increasing concerns regarding the potential of chemicals to interact with the endocrine system of humans and wildlife, various national and international programs have been initiated with the aim to develop new guidelines for the screening and testing of these chemicals in vertebrates. Here, we report on the validation of an in vitro assay, the H295R steroidogenesis assay, to detect chemicals with the potential to inhibit or induce the production of the sex steroid hormones testosterone (T) and 17??-estradiol (E2) in preparation for the development of an Organization for Economic Cooperation and Development (OECD) test guideline.

Methods

A previously optimized and pre-validated protocol was used to assess the potential of 28 chemicals of diverse structures and properties to validate the H295R steroidogenesis assay. These chemicals are comprised of known endocrine-active chemicals and ??negative?? chemicals that were not expected to have effects on the targeted endpoints, as well as a number of test chemicals with unknown modes of action at the level of the steroidogenic pathway. A total of seven laboratories from seven countries participated in this effort. In addition to effects on hormone production, confounding factors, such as cell viability and possible direct interference of test substances with antibody-based hormone detection assays, were assessed. Prior to and during the conduct of exposure experiments, each laboratory had to demonstrate that they were able to conduct the assay within the margin of predefined performance criteria.

Results

With a few exceptions, all laboratories met the key quality performance parameters, and only 2% and 7% of all experiments for T and E2, respectively, were excluded due to exceedance of these parameters. Of the 28 chemicals analyzed, 13 and 14 tested affected production of T and E2, respectively, while 11 and 8 did not result in significant effects on T and E2 production, respectively. Four and six chemicals produced ambiguous results for effects on T and E2 production, respectively. However, four of these cases each for T and E2 were associated with only one laboratory after a personnel change occurred. Significant interference of test chemicals with some of the antibody-based hormone detection systems occurred for four chemicals. Only one of these chemicals, however, significantly affected the ability of the detection system to categorize the chemical as affecting E2 or T production.

Discussion and conclusions

With one exception, the H295R steroidogenesis assay protocol successfully identified the majority of chemicals with known and unknown modes of interaction as inducers or inhibitors of T and E2 production. Thus it can be considered a reliable screen for chemicals that can alter the production of sex steroid hormones. One of the remaining limitations associated with the H295R steroidogenesis assay protocol is the relatively small basal production of E2 and its effect on quantifying the decreased production of this hormone with regard to the identification of weak inhibitors. An initial comparison of the data produced in this study with those from in vivo studies from the literature demonstrated the potential of the H295R steroidogenesis assay to identify chemicals affecting hormone homeostasis in whole organisms. Particularly promising was the lack of any false negatives during the validation and the very low number of false positives (1 out of 28 chemicals for each T and E2).

Perspectives

Based on the results obtained during this validation study and the accordingly revised test protocols, an OECD draft test guideline was developed and submitted to the OECD working group of the national coordinators of the test guidelines program (WNT) for comments in December 2009.     

Modeling Protected Species Habitat and Assigning Risk to Inform Regulatory Decisions

In the United States, environmental regulatory agencies are required to use “best available” scientific information when making decisions on a variety of issues. However, agencies are often hindered by coarse or incomplete data, particularly as it pertains to threatened and endangered species protection. Stakeholders often agree that more resolute and integrated processes for decision-making are desirable. We demonstrate a process that uses species occurrence data for a federally endangered insect (Karner blue butterfly), a readily available habitat modeling tool, and spatially explicit information about an important Michigan commodity (tart cherries). This case study has characteristics of many protected species regulatory decisions in that species occurrence data were sparse and unequally distributed; regulatory decisions (on pesticide use) were required with potentially significant impacts on a viable agricultural industry; and stakeholder relations were diverse, misinformed, and, in some situations, unjustly contentious. Results from our process include a large-scale, empirically derived habitat suitability map for the focal species and a risk ranking of tart cherry orchards with risk based on the likelihood that pesticide applications will influence the focal protected species. Although the majority (77%) of pesticide-influence zones overlapped Karner blue butterfly habitat, risk scores associated with each orchard were low. Through our process we demonstrated that spatially explicit models can help stakeholders visualize and quantify potential protected species effects. In addition, model outputs can serve to guide field activities (e.g., species surveys and implementation of pesticide buffer zones) that help minimize future effects.