1987 APCA Govermenet Agencies Directory

A method for setting air quality standards for long-term cumulative exposures of a population based on epidemiological studies has been developed. It uses exposure estimates interpolated from monitoring stations to zip code centroids, each month applied to zip code by month residence histories of the population. Two alternative cumulative exposure indices are used—hours in excess of a threshold, and the sum of concentrations above a threshold. The indices are then used with multiple logistic regression models for the health outcome data to form dose response curves for relative risk, adjusting for covariates. These curves are useful for determination of at what exposure amounts and threshold levels, effects which have both statistical and public health significance begin to occur. The method is applied to a ten year follow-up of a sub cohort of 7,343 members of the National Cancer Institute-funded Adventist Health Study. Up to 20 years of residence history was available. Analysis for prevalence of symptoms was conducted for four air pollutants— total oxidants, sulfur dioxide, nitrogen dioxide, and total suspended particulates. For each pollutant, cumulated exposures were calculated above each of five different thresholds. Statistically significant effects were noted for total suspended particulates, total oxidants, sulfur dioxide, past and passive smoking.     

Continuous Infrared Analysis of N2O in Combustion Products

Nitrous oxide (N₂O) levels in the atmosphere are increasing, potentially contributing to the greenhouse effect and depletion of stratospheric ozone. From a limited data base, combustion sources have been identified as a major anthropogenic source of N₂O. However, the existing data base (obtained by traditional grab sampling techniques followed by gas chromatographic analysis) is in question due to the discovery of a sampling artifact. A continuous on-line N₂O analyzer would enable and facilitate the accurate characterization of combustion sources over a range of operating conditions, and also aid in the development of an appropriate sampling technique. This paper addresses the development of a continuous measurement technique, and the evaluation and initial use of a field prototype continuous N₂O analyzer developed at the UCI Combustion Laboratory in cooperation with a major instrument manufacturer. The analyzer is capable of measuring N₂O levels down to a few ppm. The analyzer has been evaluated and used to study the N₂O emissions from a pulverized coal-fired boiler. The N₂O levels found with the analyzer are substantially lower than levels previously attributed to such sources. Initial N₂O measurements made with the analyzer suggest that N₂O levels are not a substantial fraction of the NO_X levels, as previously suggested.     

Development of Instrumentation for Continuous On-line Monitoring of Non-Methane Organic Carbon in Air Emissions

ABSTRACT

Non-methane organic carbon (NMOC) is a measure of total organic carbon in an air emission, excluding that from methane. Thus, it measures the total amount of carbon, irrespective of the structure and functional groups in the molecule. The U.S. Environmental Protection Agency (EPA) Method 25 is used for quantification of NMOC in emission sources and in ambient air. This method involves laboratory analysis of collected air samples and cannot be used for real-time measurements. It is prone to interferences from CO₂, CH₄, and CO, as well as moisture. In this paper, a novel method for continuous, on-line monitoring of NMOC in air emissions and ambient air is presented. Detection limits are at ppb levels, and interference of permanent gases have been eliminated.     

Recovery of an Aqueous Iron Phosphating/ Degreasing Bath by Ultrafiltration

Aqueous cleaners are emerging as safe and effective alternatives to solvent degreasers, but switching to water-based cleaners may create a new waste which is high in oil and grease and potentially RCRA hazardous. In the case study summarized here, one metal fabricator replaced a trichloroethylene degreaser with an aqueous iron phosphating/degreasing bath to clean and precondition steel parts. The aqueous bath typically lasted three to four months, until the buildup of oil in the tank began to sacrifice product quality and raise oil and grease levels in the rinse water discharge. Hauling away and replacing the spent cleaner resulted in more than 15,000 gallon/year of hazardous waste.

Ultrafiltration was selected as the most promising technology to recycle the aqueous cleaner and thereby reduce hazardous waste generation. Following pilot-scale testing at the Illinois Hazardous Waste Research and Information Center, on-site full-scale testing integrated the new waste reduction scheme directly into the facility’s production process. Ultrafiltration continuously filtered and returned clean process solution back to the iron phosphating/degreasing bath during normal plant operation, substantially reducing and maintaining oil concentrations at acceptable operating levels. The new process design successfully reduced hazardous waste generation 99.8 percent with a payback period of only 6.9 months.     

Field Method Comparison between Passive Air Samplers and Continuous Monitors for VOCs and NO2 in El Paso,Texas

Abstract

This study evaluates the performance of Model 3300 Ogawa Passive Nitrogen Dioxide (NO₂) Samplers and 3M 3520 Organic Vapor Monitors (OVMs) by comparing integrated passive sampling concentrations to averaged hourly NO₂ and volatile organic compound (VOC) measurements at two sites in El Paso, TX. Sampling periods were three time intervals (3-day weekend, 4-day weekday, and 7-day weekly) for three consecutive weeks. OVM concentrations were corrected for ambient pressure to account for higher elevation. Precise results (<5% relative standard deviation, RSD) were found for NO₂ measurements from collocated Ogawa samplers. Reproducibility was lower from duplicate OVMs for BTEX (benzene, toluene, ethylbenzene, and xylene isomers) VOCs (≥7% RSD for 2-day samples) with better precision for longer sampling periods. Comparison of Ogawa NO₂ samplers with chemiluminescence measurements averaged over the same time period suggested potential calibration problems with the chemiluminescence analyzer. For BTEX species, generally good agreement was obtained between OVMs and automated-gas chromatograph (auto-GC) measurements. The OVMs successfully tracked increasing levels of VOCs recorded by the auto-GCs.     

A new approach to characterize emission contributions from area sources during optical remote sensing technique testing

In the method termed “Other Test Method-10,” the U.S. Environmental Protection Agency has proposed a method to quantify emissions from nonpoint sources by the use of vertical radial plume mapping (VRPM) technique. The surface area of the emitting source and the degree to which the different zones of the emitting source are contributing to the VRPM computed emissions are often unknown. The objective of this study was to investigate and present an approach to quantify the unknown emitting surface area that is contributing to VRPM measured emissions. Currently a preexisting model known as the “multiple linear regression model,” which is described in Thoma et al. (2009 Thoma, E.R., Green, R., Hater, G., Goldsmith, C., Swan, N., Chase, M. and Hashmonay, R. 2010. Development of EPA OTM-10 for landfill applications. J. Environ. Eng., 136: 769–776. [Crossref], [Web of Science ®] , [Google Scholar]), is used for quantifying the unknown surface area.

The method investigated and presented in this paper utilized tracer tests to collect data and develop a model much like that described in Thoma et al. (2009 Thoma, E.R., Green, R., Hater, G., Goldsmith, C., Swan, N., Chase, M. and Hashmonay, R. 2010. Development of EPA OTM-10 for landfill applications. J. Environ. Eng., 136: 769–776. [Crossref], [Web of Science ®] , [Google Scholar]). However, unlike the study used for development of the multiple linear regression model, this study is considered a very limited study due to the low number of pollutant releases performed (seven total releases). It was found through this limited study that the location of an emitting source impacts VRPM computed emissions exponentially, rather than linearly (i.e., the impact that an emitting source has on VRPM measurements decreases exponentially with increasing distances between the emitting source and the VRPM plane). The data from the field tracer tests were used to suggest a multiple exponential regression model. The findings of this study, however, are based on a very small number of tracer tests. More tracer tests performed during all types of climatic conditions, terrain conditions, and different emissions geometries are still needed to better understand the variation of capture efficiency with emitting source location. This study provides a step toward such an objective.

Implications The findings of this study will aid in the advancement of the VRPM technique. In particular, the contribution of this study is to propose a slight improvement in how the area contributing to flux is determined during VRPM campaigns. This will reduce some of the technique's inherent uncertainties when it is employed to estimate emissions from an area source under nonideal conditions.     

Disrupted bone metabolism in contaminant-exposed white storks (Ciconia ciconia) in southwestern Spain

In 1998, the Aznalcóllar mine tailings dyke in southwestern Spain broke, flooding the Agrio-Guadiamar river system with acid tailings up to the borders of one of the largest breeding colonies of white storks in the western Palearctic, Dehesa de Abajo. Over the following years, a high proportion of nestlings developed leg defects not seen before the spill, prompting this study. Nestlings with deformed legs had significantly lower plasma phosphorous (P) and higher Ca:P ratios than non-deformed cohorts in the first two years, but in the third year, when more, younger birds were studied, plasma P ranged from much higher to much lower in the affected colony compared with reference birds. Coefficients of variation for phosphorous were 19% and 60%, in reference and contaminated colonies, respectively. Storks from the contaminated colony were unable to control P levels and Ca:P ratios within the narrow limits necessary for normal bone development.     

Amine volatility in CO2 capture

Amine volatility is a key screening criterion for amines to be used in CO₂ capture. Excessive volatility may result in significant economic losses and environmental impact. It also dictates the capital cost of the water wash. This paper reports measured amine volatility in 7 m MEA (monoethanolamine), 8 m PZ (piperazine), 7 m MDEA (n-methyldiethanolamine)/2 m PZ (piperazine), 12 m EDA (ethylenediamine), and 5 m AMP (2-amino-2-methyl-1-propanol) at 40–60 °C with lean and rich loadings giving CO₂ partial pressures of 0.5 and 5 kPa at 40 °C. The amine concentrations were chosen to maximize CO₂ capture capacity at acceptable viscosity. At the lean loading condition (where volatility is of greatest interest), the amines are ranked in order of increasing volatility: 7 m MDEA/2 m PZ (6/2 ppm), 8 m PZ (8 ppm), 12 m EDA (9 ppm), 7 m MEA (31 ppm), and 5 m AMP (112 ppm). The apparent amine partial molar excess enthalpies in these systems were estimated to range from ～10 to 87 kJ/mol of amine.     

Permitting a new mine: Insights from the community debate

When a mining company selects a site for development, the company begins a dialogue with the local community about receiving the necessary approvals for the mining permits. The dialogue focuses on how well the company can use science and technology to manage risk to the local environment, and on how much economic benefit will be gained by the local community for accepting the risk. A useful approach to better understand how the debate affects the outcome of the permitting effort is to use the method of “discourse communities and analysis”. This paper analyzes two efforts by Kennecott (Rio Tinto) and one by Exxon to develop base metal mine sites in the Upper Midwest of the USA. As the three case studies show, the local pro- and anti-mining discourse community members will not be changing their basic positions as the permitting of a new mine is debated. Accordingly, both communities are trying to convince undecided stakeholders rather than talking to each other. Both sides are using ever more sophisticated media methods to communicate their message to the undecided residents of the community. By winning the support of the majority of the undecided residents, political pressure can be used to sway the decision.     

Temporal variation and persistence of bacteria in streams

Better understanding of bacterial fate and transport in watersheds is necessary for improved regulatory management of impaired streams. Novel statistical time series analyses of coliform data can be a useful tool for evaluating the dynamics of temporal variation and persistence of bacteria within a watershed. For this study, daily total coliform data for the Little River in East Tennessee from 1 Oct. 2000 to 31 Dec. 2005 were evaluated using novel time series techniques. The objective of this study was to analyze the total coliform concentration data to: (i) evaluate the temporal variation of the total coliform, and (ii) determine whether the total coliform concentration data demonstrated any long-term or short-term persistence. For robust analysis and comparison, both time domain and frequency domain approaches were used for the analysis. In the time domain, an autoregressive moving average approach was used; whereas in the frequency domain, spectral analysis was applied. As expected, the analyses showed that total coliform concentrations were higher in summer months and lower in winter months. However, the more interesting results showed that the total coliform concentration exhibited short-term as well as long-term persistence ranging from about 4 wk to approximately 1 yr, respectively. Comparison of the total coliform data to hydrologic data indicated both runoff and baseflow are responsible for the persistence.