Regulation of Indirect Sources

The Division of Air Pollution Control, Illinois Environmental Protection Agency, has conducted an ambient air quality monitoring project focusing on carbon monoxide levels in and around several indirect sources. An analysis of the data indicates that highway-type pollutant emissions have the greatest impact on receptors in the vicinity of indirect sources. This implies that the principal, localized constraint on the siting of indirect sources will be the carbon monoxide generated on public roadways servicing those indirect sources. Clearly, adequate procedures must be developed to link such highway-type emissions to pollutant concentrations. An area-source model and a line-source model were tested using the data generated during the monitoring project. Favorable results were achieved using the line-source model. The proper siting of indirect sources involves the allocation of roadway capacity by the governmental units responsible for transportation network design, working in conjunction with regional planning bodies. A regulatory structure is suggested which emphasizes a regional approach, and an example of an air quality allocation scheme is given. The methodology is applicable to all automotive air pollutants although, in general, localized sensitivity is lost for N0₂ and photochemical oxi-dants.     

Thiosulfate as an Oxidation Inhibitor in Flue Gas Desulfurization Processes: A Review of R&D Results

Sodium thiosulfate (Na₂S₂O₃) has been tested in a pilot plant as an oxidation inhibitor in flue gas desulfurization by lime and limestone slurry scrubbing with and without MgO and adiplc acid additives. The effectiveness of thiosulfate is proportional to the inhibitor product, defined as the product of thiosulfate concentration (M), calcium concentration (M), and the moles of SO₂ absorbed per hour per liter of hold tank volume. Gypsum saturation was less than 100 percent and scaling was eliminated when the inhibitor product exceeded 0.3 × 10^?6(gmol/L)³/h. Thiosulfate was relatively more effective in systems with chlorides and less effective in systems promoted by MgO. An inhibitor product greater than 10^?6(gmol/L)³/h significantly enhanced dewatering of solids from limestone scrubbing. SO₂ removal and/or limestone utilization were increased in systems that started with less than 10 mM dissolved calcium.     

Removal of SO2 and NOX from Stack Gas by Reaction with Calcium Hydroxide Solids

Previous workers have shown that simultaneous SO₂/NO_X removal can be obtained in a dry scrubbing system with Ca(OH)₂ promoted by an additive such as NaOH, and that fly ash and product recycle improve the reactivity of the solids toward SO₂. To test SO₂/NO_X removal with fly ash and product recycle, bench-scale experiments with a packed bed reactor were performed at bag filter conditions. The most reactive solid for NO_X removal was prepared by slurrying Ca(OH)₂ with fly ash, CaSO₃, and NaOH. The best conditions for NO_X removal were the greatest temperature (125°C) and greatest concentrations of SO₂ (1500 ppm) and O₂ (20 percent). At the best conditions, NO_X removed in 1 hour was 3-4 moles per 100 moles Ca(OH)₂, compared to 5-10 moles SO₂ removed per 100 moles Ca(OH)₂. The best SO₂ removal was obtained at the highest relative humidities/lowest temperatures (55% RH/ 65°C) with solids prepared by slurrying Ca(OH)₂ with fly ash and NaOH. At these conditions, SO₂ removed In 1 hour was 60-80 moles per 100 moles Ca(OH)₂, compared to 0.5 to 1 moles NO_X removed per 100 moles Ca(OH)₂.     

The Great Lakes Hydrography Dataset: Consistent,Binational Watersheds for the Laurentian Great Lakes Basin

Ecosystem‐based management of the Laurentian Great Lakes, which spans both the United States and Canada, is hampered by the lack of consistent binational watersheds for the entire Basin. Using comparable data sources and consistent methods, we developed spatially equivalent watershed boundaries for the binational extent of the Basin to create the Great Lakes Hydrography Dataset (GLHD). The GLHD consists of 5,589 watersheds for the entire Basin, covering a total area of approximately 547,967 km², or about twice the 247,003 km² surface water area of the Great Lakes. The GLHD improves upon existing watershed efforts by delineating watersheds for the entire Basin using consistent methods; enhancing the precision of watershed delineation using recently developed flow direction grids that have been hydrologically enforced and vetted by provincial and federal water resource agencies; and increasing the accuracy of watershed boundaries by enforcing embayments, delineating watersheds on islands, and delineating watersheds for all tributaries draining to connecting channels. In addition, the GLHD is packaged in a publically available geodatabase that includes synthetic stream networks, reach catchments, watershed boundaries, a broad set of attribute data for each tributary, and metadata documenting methodology. The GLHD provides a common set of watersheds and associated hydrography data for the Basin that will enhance binational efforts to protect and restore the Great Lakes.     

Enhancement of nitrogen and phosphorus removal from eutrophic water by economic plant annual ryegrass (Lolium multiflorum) with ion implantation

Severe eutrophication of surface water has been a major problem of increasing environmental concern worldwide. In the present study, economic plant annual ryegrass (Lolium multiflorum) was grown in floating mats as an economic plant-based treatment system to evaluate its potential after ion implantation for removing nutrients in simulated eutrophic water. The specific weight growth rate of L. multiflorum with ion implantation was significantly greater than that of the control, and the peroxidase, nitrate reductase, and acid phosphatase activities of the irradiated L. multiflorum were found to be greater than those plants without ion implantation. Higher total nitrogen (TN) and total phosphorus (TP) removal efficiencies were obtained for the L. multiflorum irradiated with 25 keV 5.2?×?10¹⁶ N⁺ ions/cm² and 30 keV 4.16?×?10¹⁶ N⁺ ions/cm², respectively (p?L. multiflorum itself was directly responsible for 39–49 and 47–58 % of the overall N and P removal in the experiment, respectively. The research results suggested that ion implantation could become a promising approach for increasing phytoremediation efficiency of nutrients from eutrophic water by L. multiflorum.     

Value in sustainability: the process industry perspective

The most important driver for management is successful business that increases its value to shareholders. The adoption of environmentally responsible business practices can open up an additional range of opportunities for companies, for example by improving material efficiency. The choice to improve environmental performance of a company tends to also improve its financial performance. In this paper, our aim is to study the value of sustainability in process and mining industry from the perspective of interest groups such as investors, customers and the public, by using case examples. Interviews and workshops were employed to investigate whether or not investors and customers are interested in sustainability in the process and mining industries. We also illustrate how easy it can be to jeopardize corporate reputation through. The present situation and challenges faced in bringing sustainability into everyday business practices are summarized and proposals made concerning ways to achieve increased sustainability.     

Preparation of Calcium Silicate Reagent from Fly Ash and Lime in a Flow Reactor

Abstract

The batch reaction between fly ash and hydrated lime in water to produce high surface area calcium silicates for flue gas desulfurization has been examined extensively. This paper examines the reaction in a flow reactor using two low-calcium fly ashes and introducing gypsum, calcium sulf ite hemihydrate, and calcium chloride as additives to the reaction. The flow system is compared to the batch reaction at similar operating conditions and a segregated flow model is used to approximate flow reactor behavior.

Experiments with calcium chloride and gypsum additives were modeled fairly well by the segregated flow approximation at residence times less than 12 hours. The flow reactor produced low surface area material at longer residence times when gypsum was present. Because the changing solution chemistry affected the batch reaction rate the fly ash and hydrated lime system without gypsum or calcium chloride could not be approximated using batch reaction data. In this case, the flow reactor produced higher surface area product than the batch reactor for a given residence time due to the increased calcium hydroxide availability.     

Methane emissions from 20 landfills across the United States using vertical radial plume mapping

Landfill fugitive methane emissions were quantified as a function of climate type and cover type at 20 landfills using U.S. Environmental Protection Agency (EPA) Other Test Method (OTM)-10 vertical radial plume mapping (VRPM) with tunable diode lasers (TDLs). The VRPM data were initially collected as g CH₄/sec emission rates and subsequently converted to g CH₄/m²/day rates using two recently published approaches. The first was based upon field tracer releases of methane or acetylene and multiple linear regression analysis (MLRM). The second was a virtual computer model that was based upon the Industrial Source Complex (ISC3) and Pasquill plume stability class models (PSCMs). Calculated emission results in g CH₄/m²/day for each measured VRPM with the two approaches agreed well (r ² = 0.93). The VRPM data were obtained from the working face, temporary soil, intermediate soil, and final soil or synthetic covers. The data show that methane emissions to the atmosphere are a function of climate and cover type. Humid subtropical climates exhibited the highest emissions for all cover types at 207, 127, 102, and 32 g CH₄/m²/day, for working face (no cover), temporary, intermediate, and final cover, respectively. Humid continental warm summers showed 67, 51, and 27 g CH₄/m²/day for temporary, intermediate, and final covers. Humid continental cool summers were 135, 40, and 26 g CH₄/m²/day for the working face, intermediate, and final covers. Mediterranean climates were examined for intermediate and final covers only and found to be 11 and 6 g CH₄/m²/day, respectively, whereas semiarid climates showed 85, 11, 3.7, and 2.7 g CH₄/m²/day for working face, temporary, intermediate, and final covers. A closed, synthetically capped landfill covered with soil and vegetation with a gas collection system in a humid continental warm summer climate gave mostly background methane readings and average emission rates of only 0.09 g CH₄/m²/day flux when measurable.

Implications The OTM-10 method is being proposed by EPA to quantify surface methane emissions from landfill covers. This study of 20 landfills across the United States was done to determine the efficacy of using OTM-10 for this purpose. Two recently published models were used to evaluate the methane flux results found with VRPM optical remote sensing. The results should provide a sense of the practicality of the method, its limitations at landfills, and the impact of climate upon the cover's methane flux. Measured field data may assist landfill owners in refining previously modeled methane emission factor default values.     

Comparative embryotoxicity of a pentabrominated diphenyl ether mixture to common terns (Sterna hirundo) and American kestrels (Falco sparverius)

Concentrations of polybrominated diphenyl ethers (PBDEs) in Forster’s tern (Sterna forsteri) eggs from San Francisco Bay have been reported to range up to 63 μg g⁻¹ lipid weight. This value exceeds the lowest-observed-adverse-effect level (1.8 μg g⁻¹ egg wet weight; ∼32 μg⁻¹ lipid weight) reported in an embryotoxicity study with American kestrels (Falco sparverius). As a surrogate for Forster’s terns, common tern (Sterna hirundo) eggs were treated by air cell injection with corn oil vehicle (control) or a commercial penta-BDE formulation (DE-71) at nominal concentrations of 0.2, 2, and 20 μg g⁻¹ egg. As a positive control, kestrel eggs received vehicle or 20 μg DE-71 g⁻¹ egg. In terns, there were no effects of DE-71 on embryonic survival, and pipping or hatching success; however, treated eggs hatched later (0.44 d) than controls. Organ weights, organ-to-body weight ratios, and bone lengths did not differ, and histopathological observations were unremarkable. Several measures of hepatic oxidative stress in hatchling terns were not affected by DE-71, although there was some evidence of oxidative DNA damage (8-hydroxy-deoxyguanosine; 8-OH-dG). Although DE-71 did not impair pipping and hatching of kestrels, it did result in a delay in hatch, shorter humerus length, and reduced total thyroid weight. Concentrations of oxidized glutathione, reduced glutathione, thiobarbituric acid reactive substances, and 8-OH-dG in liver were greater in DE-71-treated kestrels compared to controls. Our findings suggest common tern embryos, and perhaps other tern species, are less sensitive to PBDEs than kestrel embryos.